Design of X-Y Flexible Adjustment Mechanism for Moving Mirror in Lithographic Projection Objective

Chao Yang; Xianchang Zhu; Chuan Jin; Song Hu

doi:10.3788/LOP202259.0411002

[1] Xu W C, Huang W, Yang W. Magnification tolerancing and compensation for the lithographic projection lens[J]. Acta Optica Sinica, 31, 112203(2011).

[2] Guo P, Zhou J, Ding X Y et al. Method to solve assembly misalignment of two-reverse system based on vector wave aberration theory[J]. Acta Optica Sinica, 39, 0722002(2019).

[3] Li Y Q, Liu Y, Liu L H. Effect of thermal deformation on imaging performance for 16 nm extreme ultraviolet lithography objective[J]. Acta Optica Sinica, 39, 0122001(2019).

[4] Guo K, Gong Y. Effect of adjusting force on surface figure of optical element in axial adjustment mechanism[J]. Acta Optica Sinica, 33, 1123001(2013).

[5] Feng M C, Xu L, Wang Y J. Collimation factors and performance analysis based on Michelson interferometer[J]. Laser & Optoelectronics Progress, 57, 132201(2020).

[6] Fukagawa Y, Shinano Y, Nakamori M. Optimum adjustment for distortion in semiconductor lithography equipment[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 378-384(2008).

[7] Yu J J, Pei X, Bi S S et al. State-of-arts of design method for flexure mechanisms[J]. Journal of Mechanical Engineering, 46, 2-13(2010).

[8] Yong Y K, Lu T F. Kinetostatic modeling of 3-RRR compliant micro-motion stages with flexure hinges[J]. Mechanism and Machine Theory, 44, 1156-1175(2009).

[9] Zhao L, Liang C, Zhang D F et al. Forward kinematics of 3-RRR flexure parallel mechanism used in lens micro-adjustment[J]. Optics and Precision Engineering, 24, 1373-1381(2016).

[10] Liu H, Liu W Q, Feng R et al. Novel design and analysis of a flexible mechanism of moving mirror[J]. Infrared and Laser Engineering, 41, 184-189(2012).

[11] Gao P, Yan G Z, Wang Z W et al. Flexible locomotion system for gastrointestinal microrobots[J]. Optics and Precision Engineering, 20, 541-549(2012).

[12] Wang Z S, Zhai Y, Mei G et al. Design of flexible support structure of reflector in space remote sensor[J]. Optics and Precision Engineering, 18, 1833-1841(2010).

[13] Lu Y F, Fan D P, Fan S X et al. Design of two-axis elastic support for fast steering mirror[J]. Optics and Precision Engineering, 18, 2574-2582(2010).

[14] Kim H S, Kim E J, Song B S. Diamond turning of large off-axis aspheric mirrors using a fast tool servo with on-machine measurement[J]. Journal of Materials Processing Technology, 146, 349-355(2004).

[15] Li Y M, Xu Q S. Design and analysis of a totally decoupled flexure-based XY parallel micromanipulator[J]. IEEE Transactions on Robotics, 25, 645-657(2009).

[16] Hale L. Principles and techniques for designing precision machines[R](1999).

[17] Ryu J W, Gweon D G, Moon K S. Optimal design of a flexure hinge based XYφ wafer stage[J]. Precision Engineering, 21, 18-28(1997).

[18] Wang H, Zhang X M, Deng J G. Research on a precision positioning stage based on piezoelectric actuators[J]. Journal of Test and Measurement Technology, 21, 295-300(2007).

[19] Zhao L, Gong Y, Zhao Y. Flexure-based X-Y micro-motion mechanism used in lithographic lens[J]. Optics and Precision Engineering, 21, 1425-1433(2013).

[20] Sun Z, Gong Y. Design of V-flexure axial adjusting mechanism of lithograph projection objective[J]. Laser & Optoelectronics Progress, 50, 101101(2013).

[21] Chen H N, Guo K, Zhang L H et al. Designing for flexure-based X-Y adjusting mechanism of lithograph projection objective[J]. Opto-Electronic Engineering, 42, 50-56(2015).

[22] Sun H, Sun Z M[M]. Mechanical principle, 13-15(2000).

[23] Zuo X Y, Liu X M. Calculation and analysis of rotational stiffness for three types of flexure hinges[J]. Chinese Journal of Scientific Instrument, 27, 1725-1728(2006).