• Chinese Optics Letters
  • Vol. 20, Issue 1, 011601 (2022)
Bin Shen1、*, Huai Xiong1、**, Xu Zhang1, Zhiya Chen1, Xiangyang Pang1, Yajing Guo1, Chengjie Liang1、2, and Haiyuan Li1
Author Affiliations
  • 1Key Laboratory of High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China
  • 2Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
  • show less
    DOI: 10.3788/COL202220.011601 Cite this Article Set citation alerts
    Bin Shen, Huai Xiong, Xu Zhang, Zhiya Chen, Xiangyang Pang, Yajing Guo, Chengjie Liang, Haiyuan Li. Post-treatment of 351 nm SiO2 antireflective coatings for high power laser systems prepared by the sol-gel method[J]. Chinese Optics Letters, 2022, 20(1): 011601 Copy Citation Text show less
    Schematic diagram showing post-treatment processes of 3ω AR.
    Fig. 1. Schematic diagram showing post-treatment processes of 3ω AR.
    Optical performance of 3ω AR coatings at different experimental stages: (a) sample 1, (b) sample 2, (c) sample 3, (d) sample 4.
    Fig. 2. Optical performance of 3ω AR coatings at different experimental stages: (a) sample 1, (b) sample 2, (c) sample 3, (d) sample 4.
    Water contact angles of the 3ω AR coatings.
    Fig. 3. Water contact angles of the 3ω AR coatings.
    Defect positions of all samples. (a)–(d) samples 1–4 before 85°C/85 RH treatment, (e)–(h) samples 1–4 after 85°C/85 RH treatment.
    Fig. 4. Defect positions of all samples. (a)–(d) samples 1–4 before 85°C/85 RH treatment, (e)–(h)  samples 1–4 after 85°C/85 RH treatment.
    Transmittance spectra before and after contamination: (a) sample 1, (b) sample 2, (c) sample 3, (d) sample 4.
    Fig. 5. Transmittance spectra before and after contamination: (a) sample 1, (b) sample 2, (c) sample 3, (d) sample 4.
    Transmission loss of samples at 351 nm.
    Fig. 6. Transmission loss of samples at 351 nm.
    LIDT (355 nm, 6.8 ns) results of the samples.
    Fig. 7. LIDT (355 nm, 6.8 ns) results of the samples.
    SampleEffect of Heat TreatmentEffect of Heat Treatment and Post-TreatmentEffect of 85°C/85 RH
    λmax/nmTmax/%λmax/nmTmax/%λmax/nmTmax/%
    136899.5837499.5537699.28
    235599.6537399.5037299.03
    336699.6536999.6738898.42
    435499.6737499.4637299.25
    Table 1. Peak Transmittance and Wavelength of 3ω AR Coatings at Different Experimental Stages
    Bin Shen, Huai Xiong, Xu Zhang, Zhiya Chen, Xiangyang Pang, Yajing Guo, Chengjie Liang, Haiyuan Li. Post-treatment of 351 nm SiO2 antireflective coatings for high power laser systems prepared by the sol-gel method[J]. Chinese Optics Letters, 2022, 20(1): 011601
    Download Citation