[2] Sun Peng. Research on key technologies of largescale dynamic photogrammetry[D]. Beijing: Beijing University of Posts Telecommunications, 2019. (in Chinese)
[3] Baumer S M B, Timmers W A G, Krichever M, et al. Temperaturecompensated plastic lens f visible light [C]Optical Systems Design & Production. International Society f Optics Photonics, SPIE, 1999, 3737: 354362.
[4] Ma Qinwei. Research on the mechanism crection of errs in optical mechanics methods caused by temperature[D]. Beijing: Beijing Institute of Technology, 2014. (in Chinese)
[5] Tao Li. Research on visual measurement method under thermal vacuum environment[D]. Tianjin: Tianjin University, 2012. (in Chinese)
[6] Linghua Wang, Qingwen Wu, Liang Guo, et al. Thermal design and thermal analysis of high-resolution visible light aerial camera. Infrared and Laser Engineering, 41, 1236-1243(2012).
[7] Yang Wang, Qingliang Meng, Zhenming Zhao, et al. All-optical cold chain thermal design of transmissive cryogenic optical infrared camera. Infrared and Laser Engineering, 50, 20200345(2021).
[8] Robson S, Clarke T A, Chen J. Suitability of the Pulnix TM6CN CCD camera f photogrammetric measurement [C]Optical Tools f Manufacturing Advanced Automation, SPIE, 1993, 2067: 6677.
[9] Hel H. Analyzing the influence of camera temperature on the image acquisition process [C]Proceedings of SPIEThe International Society f Optical Engineering, 2008, 6805: 6805X.
[10] Q Yu, Z Chao, G Jiang, et al. The effects of temperature variation on videometric measurement and a compensation method. Image and Vision Computing, 32, 1021-1029(2014).
[11] Smith M J, Cope E. The effects of temperature variation on singlelensreflex digital camera calibration parameters [C]International Archives of Photogrammetry, Remote Sensing Spatial Infmation Sciences, 2010, XXXVIII: 554559.
[12] P Podbreznik, B Potočnik. Assessing the influence of temperature variations on the geometrical properties of a low-cost calibrated camera system by using computer vision procedures. Machine Vision and Applications, 23, 953-966(2012).
[13] M Daakir, Y Zhou, Deseilligny M Pierrot, et al. Improvement of photogrammetric accuracy by modeling and correcting the thermal effect on camera calibration. ISPRS Journal of Photogrammetry and Remote Sensing, 148, 142-155(2019).
[14] L Yu, G Lubineau. Modeling of systematic errors in stereo-digital image correlation due to camera self-heating. Scientific Reports, 9, 18007(2019).
[15] B Pan, L Yu, D Wu. High-accuracy 2D digital image correlation measurements with bilateral telecentric lenses: Error analysis and experimental verification. Experimental Mechanics, 53, 1719-1733(2013).
[16] S Ma, S Zhou, Q Ma. Image distortion of working digital camera induced by environmental temperature and camera self-heating. Optics and Lasers in Engineering, 115, 67-73(2019).
[17] S Zhou, H Zhu, Q Ma, et al. Heat transfer and temperature characteristics of a working digital camera. Sensors, 20, 2561(2020).
[18] B Pan, W Shi, G Lubineau. Effect of camera temperature variations on stereo-digital image correlation measurements. Applied Optics, 54, 10089(2015).
[19] Fan Yue. Research on photomechanical thermal analysis thermal control technology of aerial camera[D]. Chengdu: Graduate University of Chinese Academy of Sciences (Institute of Optoelectronic Technology), 2013. (in Chinese)
[20] Xueli Li, Lei Zhang, Zhikai Fu. Analysis of finite element simulation method for thermal stress of infrared focal plane detector. Laser & Infrared, 50, 429-434(2020).
[21] Xincheng Song, Yu Zhang, Yanfei Shi, et al. Design of temperature control system for infrared thermal imager under non-uniform temperature field. Infrared and Laser Engineering, 48, 0604002(2019).
[22] Liang Guo, Qingwen Wu, Yalin Ding, et al. Design and verification of phase change temperature control for focal plane components of aerial camera. Infrared and Laser Engineering, 42, 2060-2067(2013).