• Laser & Optoelectronics Progress
  • Vol. 54, Issue 12, 121202 (2017)
Sui Xiaole, Xiao Xia*, Qi Haiyang, and Kong Tao
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/lop54.121202 Cite this Article Set citation alerts
    Sui Xiaole, Xiao Xia, Qi Haiyang, Kong Tao. Influence of Residual Stress on Young Modulus Detection of SiO2 Bulk Materials by Laser-Induced Surface Ultrasonic Wave Technique[J]. Laser & Optoelectronics Progress, 2017, 54(12): 121202 Copy Citation Text show less
    References

    [1] Lin K, Yu Y G, Xi J T, et al. A fiber-coupled self-mixing laser diode for the measurement of Young′s modulus[J]. Sensors, 2016, 16(6): 928.

    [2] Zhu Qian, Qiu Jinhao, Zhang Chao, et al. Application of laser ultrasonic detection method for double-layer laminated material[J]. Laser & Optoelectronics Progress, 2016, 53(3): 031402.

    [3] Li Zhiguo, Xiao Xia, Zhang Xinhui, et al. Dispersive characteristics of surface acoustic waves for measuring mechanical properties of low-k dielectrics used in ULSI[J]. Chinese Journal of Semiconductors, 2005, 26(10): 2032-2037.

    [4] Fall D, Compoint F, Duquennoy M, et al. Surface acoustic wave characterization of optical sol-gel thin layers[J]. Ultrasonics, 2016, 68: 102-107.

    [5] Zhan Yu, Xue Junchuan, Liu Changsheng. Numerical simulation of laser ultrasonic elastic constant measurement based on Abaqus[J]. Chinese J Lasers, 2015, 42(5): 0508002.

    [6] Xiao X, Qi H Y, Tao Y, et al. Study on the interfacial adhesion property of low-k, thin film by the surface acoustic waves with cohesive zone model[J]. Applied Surface Science, 2016, 388: 448-454.

    [7] Shan X M, Xiao X, Liu Y L. Determination of Young′s modulus and Poisson′s ratio of nanoporous low-k thin film by laser-generated surface acoustic waves[J]. Advanced Science Letters, 2011, 4(3): 1230-1234.

    [8] Xiao Xia, Bai Maosen, Li Zhiguo, et al. Signal processing in the LSAWs experiment for determining Young′s modulus of low-k film[J]. Journal of Tianjin University, 2007, 40(5): 554-558.

    [10] Yang Yongliang, Yue Li, Li Na, et al. Study on the properties of DLC films with Si doping prepared by Rf-PECVD[J]. Laser & Optoelectronics Progress, 2015, 52(1): 013101.

    [12] Murnaghan F D. Finite deformation of an elastic solid[M]. New York: Wiley, 1951.

    [13] Hughes D S, Kelly J L. Second-order elastic deformation of solids[J]. Physical Review, 1953, 92(5): 1145-1149.

    [14] Duquennoy M, Ouaftouh M, Ourak M, et al. Influence of natural and initial acoustoelastic coefficients on residual stress evaluation: Theory and experiment[J]. Journal of Applied Physics, 1999, 86(5): 2490-2498.

    [16] Duquennoy M, Ouaftouh M, Devos D, et al. Effective elastic constants in acoustoelasticity[J]. Applied Physics Letters, 2008, 92(24): 244105.

    [17] Bogardus E H. Third-order elastic constants of Ge, MgO, and fused SiO2[J]. Journal of Applied Physics, 1965, 36(8): 2504-2513.

    [18] Leplan H, Geenen B, Robic J Y, et al. Residual stresses in evaporated silicon dioxide thin films: Correlation with deposition parameters and aging behavior[J]. Journal of Applied Physics, 1995, 78(2): 962-968.

    [19] Ye Xiaowen, Ding Tao, Cheng Xinbin, et al. Contrastive investigation of the residual stress of SiO2 films prepared by electron beam evaporation in different relative humidity environments[J]. Infrared and Laser Engineering, 2012, 41(3): 713-717.

    [20] Shao Shuying, Tian Guanglei, Fan Zhengxiu, et al. Influences of the deposition parameters and aging time on the residual stress of SiO2 films[J]. Acta Optica Sinica, 2005, 25(1): 126-130.

    Sui Xiaole, Xiao Xia, Qi Haiyang, Kong Tao. Influence of Residual Stress on Young Modulus Detection of SiO2 Bulk Materials by Laser-Induced Surface Ultrasonic Wave Technique[J]. Laser & Optoelectronics Progress, 2017, 54(12): 121202
    Download Citation