[1] I A Choudhury, S Shirley. Laser cutting of polymeric materials: an experimental investigation. Opt Laser Technol, 42, 503-508(2010).
[2] A Ancona, S Döring, C Jauregui, F Röser, J Limpert et al. Femtosecond and picosecond laser drilling of metals at high repetition rates and average powers. Opt Lett, 34, 3304-3306(2009).
[3] I Miyamoto, K Cvecek, Y Okamoto, M Schmidt. Internal modification of glass by ultrashort laser pulse and its application to microwelding. Appl Phys A, 114, 187-208(2014).
[4] Y J Lee, H C Kuo, T C Lu, S C Wang, K W Ng et al. Study of GaN-based light-emitting diodes grown on chemical wet-etching-patterned sapphire substrate with V-shaped pits roughening surfaces. J Lightwave Technol, 26, 1455-1463(2008).
[5] D Hyypio. Mitigation of bearing electro-erosion of inverter-fed motors through passive common-mode voltage suppression. IEEE Trans Ind Appl, 41, 576-583(2005).
[6] H Y Meng, J H Liao, Y H Zhou, Q M Zhang. Laser micro-processing of cardiovascular stent with fiber laser cutting system. Opt Laser Technol, 41, 300-302(2009).
[7] W Watanabe, Y Li, K Itoh. Ultrafast laser micro-processing of transparent material. Opt Laser Technol, 78, 52-61(2016).
[8] N H Rizvi, P Apte. Developments in laser micro-machining techniques. J Mater Process Technol, 127, 206-210(2002).
[9] B H Lu, H B Lan, H Z Liu. Additive manufacturing frontier: 3D printing electronics. Opto-Electron Adv, 1, 170004(2018).
[10] K C Xu, C T Zhang, R Zhou, R Ji, M H Hong. Hybrid micro/nano-structure formation by angular laser texturing of Si surface for surface enhanced Raman scattering. Opt Express, 24, 10352-10358(2016).
[11] M H Mahdieh, M Nikbakht, Moghadam Z Eghlimi, M Sobhani. Crater geometry characterization of Al targets irradiated by single pulse and pulse trains of Nd:YAG laser in ambient air and water. Appl Surf Sci, 256, 1778-1783(2010).
[12] J König, S Nolte, A Tünnermann. Plasma evolution during metal ablation with ultrashort laser pulses. Opt Express, 13, 10597-10607(2005).
[13] T H R Crawford, A Borowiec, H K Haugen. Femtosecond laser micromachining of grooves in silicon with 800 nm pulses. Appl Phys A, 80, 1717-1724(2005).
[14] N M Bulgakova, A V Bulgakov. Pulsed laser ablation of solids: transition from normal vaporization to phase explosion. Appl Phys A, 73, 199-208(2001).
[15] M Zhou, Y K Zhang, L Cai. Laser shock forming on coated metal sheets characterized by ultrahigh-strain-rate plastic deformation. J Appl Phys, 91, 5501-5503(2002).
[16] C Gerhard, S Roux, S Brückner, S Wieneke, W Viöl. Atmospheric pressure argon plasma-assisted enhancement of laser ablation of aluminum. Appl Phys A, 108, 107-112(2012).
[17] S Kajita, N Ohno, S Takamura, W Sakaguchi, D Nishijima. Plasma-assisted laser ablation of tungsten: reduction in ablation power threshold due to bursting of holes/bubbles. Appl Phys Lett, 91, 261501(2007).
[18] V I Babushok, Jr F C DeLucia, J L Gottfried, C A Munson, A W Miziolek. Double pulse laser ablation and plasma: laser induced breakdown spectroscopy signal enhancement. Spectrochim Acta Part B: At Spectrosc, 61, 999-1014(2006).
[19] E D Jansen, T Asshauer, M Frenz, M Motamedi, G Delacrétaz et al. Effect of pulse duration on bubble formation and laser-induced pressure waves during holmium laser ablation. Lasers Surg Med, 18, 278-293(1996).
Set citation alerts for the article
Please enter your email address
CancelConfirm