[1] Mimura H, Morita S, Kimura T et al. Focusing mirror for X-ray free-electron lasers[J]. The Review of Scientific Instruments, 79, 083104(2008).
[2] Prajapati A R, Rajpurohit S R[J]. Formation and applications of single crystal material Indian Journal of Scientific Research, 17, 53-59.
[3] Zhao D W, Lu X C. Chemical mechanical polishing: theory and experiment[J]. Friction, 1, 306-326(2013).
[4] Chen X, Liu C L, Ke J Y et al. Subsurface damage and phase transformation in laser-assisted nanometric cutting of single crystal silicon[J]. Materials & Design, 190, 108524(2020).
[5] Cheong W D, Zhang L C. Molecular dynamics simulation of phase transformations in silicon monocrystals due to nano-indentation[J]. Nanotechnology, 11, 173-180(2000).
[6] Serikawa T, Henmi M, Yamaguchi T et al. Depositions and microstructures of Mg-Si thin film by ion beam sputtering[J]. Surface and Coatings Technology, 200, 4233-4239(2006).
[7] Anandkumar R, Almeida A, Colaço R et al. Microstructure and wear studies of laser clad Al-Si/SiC(p) composite coatings[J]. Surface and Coatings Technology, 201, 9497-9505(2007).
[8] Ferro A C, Derby B. Wetting behaviour in the Al-Si/SiC system: interface reactions and solubility effects[J]. Acta Metallurgica et Materialia, 43, 3061-3073(1995).
[9] Wang G L, Feng Z J, Zheng Q C et al. Molecular dynamics simulation of nano-polishing of single crystal silicon on non-continuous surface[J]. Materials Science in Semiconductor Processing, 118, 105168(2020).
[10] Pratap A[J]. Patra K. Evolution of chemo-mechanical effects during single grit diamond scratching of monocrystalline silicon in the presence of potassium hydroxide. Wear, 452/453, 203292(2020).
[11] Wang J S, Fang F Z, Zhang X D. Nanometric cutting of silicon with an amorphous-crystalline layered structure: a molecular dynamics study[J]. Nanoscale Research Letters, 12, 1-10(2017).
[12] Dai H, Zhou Y, Li P et al. Evolution of nano-cracks in single-crystal silicon during ultraprecision mechanical polishing[J]. Journal of Manufacturing Processes, 58, 627-636(2020).
[13] Liu M C, Jin P, Xu Z P et al. Two-dimensional modeling of the self-limiting oxidation in silicon and tungsten nanowires[J]. Theoretical and Applied Mechanics Letters, 6, 195-199(2016).
[14] Kobayashi K F, Hogan L M. The crystal growth of silicon in Al-Si alloys[J]. Journal of Materials Science, 20, 1961-1975(1985).
[15] Suratwala T, Wong L, Miller P et al. Sub-surface mechanical damage distributions during grinding of fused silica[J]. Journal of Non-Crystalline Solids, 352, 5601-5617(2006).
[17] Wong L, Suratwala T, Feit M D et al. The effect of HF/NH4F etching on the morphology of surface fractures on fused silica[J]. Journal of Non-Crystalline Solids, 355, 797-810(2009).
[18] Pal R K, Garg H, Karar V. Material removal characteristics of full aperture optical polishing process[J]. Machining Science and Technology, 21, 493-525(2017).
[19] Wu L, Yu B J, Zhang P et al. Rapid identification of ultrathin amorphous damage on monocrystalline silicon surface[J]. Physical Chemistry Chemical Physics, 22, 12987-12995(2020).
[20] Miller P E, Suratwala T I, Wong L L et al. The distribution of subsurface damage in fused silica[J]. Proceedings of SPIE, 5991, 599101(2005).
[21] Pietsch GJ, Chabal YJ, Higashi G S. The atomic-scale removal mechanism during chemo-mechanical polishing of Si( 100) andSi( 111) [J]. SurfaceScience, 1995, 331/332/333: 395- 401.
[22] Suratwala T, Steele R, Feit M D et al. Effect of rogue particles on the sub-surface damage of fused silica during grinding/polishing[J]. Journal of Non-Crystalline Solids, 354, 2023-2037(2008).
[23] Suratwala T, Steele R, Destino J et al. Sapphire advanced mitigation process: wet etch to expose sub-surface damage and increase laser damage resistance and mechanical strength[J]. Applied Optics, 59, 1602-1610(2020).
[24] Suratwala T, Steele R, Shen N et al. Lateral cracks during sliding indentation on various optical materials[J]. Journal of the American Ceramic Society, 103, 1343-1357(2020).
[25] Sun P F, Zhang L X, Li J et al. Influence of polishing slurry viscosityon the material removal function for fluid jet polishing[J]. Acta Optica Sinica, 38, 1222003(2018).
[26] Zhang L, Zhao H W, Ma Z C et al. A study on phase transformation of monocrystalline silicon due to ultra-precision polishing by molecular dynamics simulation[J]. AIP Advances, 2, 042116(2012).
[27] Domnich V, Gogotsi Y. Phase transformations in silicon under contact loading[J]. Reviews on Advanced Materials Science, 3, 1-36(2002).
[28] Shen N, Suratwala T, Steele W et al. Nanoscratching of optical glass surfaces near the elastic-plastic load boundary to mimic the mechanics of polishing particles[J]. Journal of the American Ceramic Society, 99, 1477-1484(2016).
[29] Suratwala T, Feit M, Steele W et al. Microscopic removal function and the relationship between slurry particle size distribution and workpiece roughness during pad polishing[J]. Journal of the American Ceramic Society, 97, 81-91(2014).
[30] Dylla-Spears R, Wong L, Miller P E et al. Charged micelle halo mechanism for agglomeration reduction in metal oxide particle based polishing slurries[J]. Colloids and Surfaces A, 447, 32-43(2014).
[31] Łysko J M. Anisotropic etching of the silicon crystal-surface free energy model[J]. Materials Science in Semiconductor Processing, 6, 235-241(2003).
[32] Kang Y J, Kang B K, Park J G et al. Effect of slurry pH on poly silicon CMP. [C]//International Conference on Planarization/CMP Technology, October 25-27, 2007, Dresden, Germany. New York: VDE(2007).
[33] Suratwala T, Feit M D, Steele W A et al. Influence of temperature and material deposit on material removal uniformity during optical pad polishing[J]. Journal of the American Ceramic Society, 97, 1720-1727(2014).
[34] Liu B X, Jiao X, Tan X H et al. Effect of anionic modified polishing agent on Nd-doped phosphate laser glass polishing[J]. Chinese Journal of Lasers, 47, 1003001(2020).
[35] Suratwala T, Steele W, Feit M et al. Relationship between surface μ-roughness and interface slurry particle spatial distribution during glass polishing[J]. Journal of the American Ceramic Society, 100, 2790-2802(2017).
[36] Sivanandini M, Dhami S S, Pabla B S et al. Effect of 3-mercaptopropyltrimethoxysilane on surface finish and material removal rate in chemical mechanical polishing[J]. Procedia Materials Science, 6, 528-537(2014).
[38] Bruns S, Petho L, Minnert C et al. Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting[J]. Materials & Design, 186, 108311(2020).
[39] Jiang X W, Long X W, Tan Z Q. A review of material removal mechanism in ultra-precision polishing of optical glass[J]. Chinese Journal of Lasers, 48, 0401014(2021).
[40] Johnson K L[M]. Contact mechanics(1985).
[41] Lawn B, Wilshaw R. Indentation fracture: principles and applications[J]. Journal of Materials Science, 10, 1049-1081(1975).
[42] Lawn B R, Wilshaw T R, Rice J R. Fracture of brittle solids (Cambridge solid state science series)[J]. Journal of Applied Mechanics, 44, 517(1977).
[43] Suratwala T I, Steele W A, Feit M D et al. Mechanisms & control of surface figure & roughness during pad polishing. [C]//Optical Fabrication and Testing 2014, June 22-26, 2014, Kohala Coast, Hawaii. Washington, D.C.: OSA, OTu2B(2014).
[44] Creath K. Revisiting PSD analysis considerations. [C]//Optical Fabrication and Testing 2017, July 9-13, 2017, Denver, Colorado, United States. Washington, D.C.: OSA, OW2B, 3(2017).
