Study on AlSi10Mg Alloy with Complex Flow Channels by Laser Powder Bed Fusion

Xiaogang Zhu; Anping Dong; Lingyu Cheng; Jing Sun; Zhengwu Liu; Lijie Guo

doi:10.3788/LOP220455

[1] Laguna O H, Lietor P F, Godino F J I et al. A review on additive manufacturing and materials for catalytic applications: milestones, key concepts, advances and perspectives[J]. Materials & Design, 208, 109927(2021).

[2] Blakey-Milner B, Gradl P, Snedden G et al. Metal additive manufacturing in aerospace: a review[J]. Materials & Design, 209, 110008(2021).

[3] Zhang J L, Song B, Wei Q S et al. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends[J]. Journal of Materials Science & Technology, 35, 270-284(2019).

[4] Qin Y L, Sun B H, Zhang H et al. Development of selective laser melted aluminum alloys and aluminum matrix composites in aerospace field[J]. Chinese Journal of Lasers, 48, 1402002(2021).

[5] Yang J X, Wu W L, Wang C L et al. Development status and typical application of selective laser melting technology applications in aerospace field[J]. Journal of Aeronautical Materials, 41, 1-15(2021).

[6] Zhang H Q, You L T, Cheng Z H et al. Effect of alumina addition on mechanical properties of 3D-printed 18Ni300 die steel[J]. Laser & Optoelectronics Progress, 58, 2316002(2021).

[7] Yan T Q, Chen B Q, Tang P J et al. Effect of layer thickness on forming quality and efficiency of AlSi10Mg alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 48, 1002106(2021).

[8] Hou W, Chen J, Chu S L et al. Anisotropy of microstructure and tensile properties of AlSi10Mg formed by selective laser melting[J]. Chinese Journal of Lasers, 45, 0702003(2018).

[9] Tang P J, Yan T Q, Li P Y et al. Microstructures and fracture toughness of annealed AlSi10Mg alloy formed by selective laser melting[J]. Chinese Journal of Lasers, 48, 1002101(2021).

[10] Zou T C, Zhu H, Chen M Y et al. Microstructure and tensile properties of SiC reinforced aluminum matrix composite prepared by selective laser melting[J]. Chinese Journal of Lasers, 48, 1002123(2021).

[11] Solyaev Y, Rabinskiy L, Tokmakov D. Over melting and closing of thin horizontal channels in AlSi10Mg samples obtained by selective laser melting[J]. Additive Manufacturing, 30, 100847(2019).

[12] Koehly C, Neuberger H, Bühler L. Fabrication of thin-walled fusion blanket components like flow channel inserts by selective laser melting[J]. Fusion Engineering and Design, 143, 171-179(2019).

[13] Han S, Salvatore F, Rech J et al. Abrasive flow machining (AFM) finishing of conformal cooling channels created by selective laser melting (SLM)[J]. Precision Engineering, 64, 20-33(2020).

[14] Gradl P R, Greene S E, Protz C et al. Additive manufacturing of liquid rocket engine combustion devices: a summary of process developments and hot-fire testing results[C], 4625(2018).

[15] Ni C. Research on key technologies in selective laser melting of micro-channel heat exchanger[D], 69-75(2021).

[16] Liu M N, Wei K W, Deng J F et al. Selective laser melting rapid forming technology of aluminum alloy liquid cold plate[J]. Laser＆Optoelectronics Progress, 58, 1314002(2021).

[17] Zhang W K, Tan Y H, Gao Y S et al. Research progress of additive manufacturing technology in liquid rocket engine[J]. Journal of Propulsion Technology, 43, 24-39(2022).

[18] Zhu X G, Sun J, Wang L F et al. Microstructure, properties and inclined plane forming quality of aluminum alloy by selective laser melting[J]. Materials for Mechanical Engineering, 41, 77-80(2017).