[1] I Gibson, D W Rosen, B Stucker . Additive manufacturing technologies(2010).

[2] B Derby. Printing and prototyping of tissues and scaffolds. Science, 338, 921-926(2012).

[3] J A Lewis, B Y Ahn. Device fabrication: Three-dimensional printed electronics. Nature, 518, 42-43(2015).

[4] Y L Kong, I A Tamargo, H Kim, B N Johnson, M K Gupta et al. 3D printed quantum dot light-emitting diodes. Nano Lett, 14, 7017-7023(2014).

[5] H Lan. Active mixing nozzle for multimaterial and multiscale three-dimensional printing. J Micro Nano-Manuf, 5, 040904(2017).

[6] X Zheng, W Smith, J Jackson, B Moran, H Cui et al. Multiscale metallic metamaterials. Nature Mater, 15, 1100-1106(2016).

[7] M Vaezi, H Seitz, S Yang. A review on 3D micro-additive manufacturing technologies. Int J Adv Manuf Technol, 67, 1721-1754(2013).

[8] X Y Tian, L X Yin, D C Li. Current situation and trend of fabrication technologies for three-dimensional metamaterials. Opto-Electron Eng, 44, 69-76(2017).

[9] D Espalin, D. W Muse, E MacDonald, R B Wicker. 3D Printing multifunctionality: structures with electronics. Int J Adv Manuf Technol, 72, 963-978(2014).

[10] Y Lu, M Vatani, J W Choi. Direct-write/cure conductive polymer nanocomposites for 3D structural electronics. J Mech Sci Technol, 27, 2929-2934(2013).

[11] J T Muth, D M Vogt, R L Truby, Y Mengüç, D B Kolesky et al. Embedded 3D printing of strain sensors within highly stretchable elastomers. Adv Mater, 26, 6307-6312(2014).

[12] S Y Wu, C Yang, W Hsu, L Lin. 3D-printed microelectronics for integrated circuitry and passive wireless sensors. Microsys Nanoeng, 1, 15013(2015).

[13] K Sun, T S Wei, B Y Ahn, J Y Seo, S J Dillon et al. 3D Printing of interdigitated Li-Ion microbattery architectures. Adv Mater, 25, 4539-4543(2013).

[14] D Lehmhus, C Aumund-Kopp, F Petzoldt, D Godlinskic, A Haberkorn et al. Customized smartness: a survey on links between additive manufacturing and sensor integration. Procedia Tech, 26, 284-301(2016).

[15] C Ladd, J H So, J Muth, M D Dickey. 3D printing of free standing liquid metal microstructures. Adv Mater, 25, 5081-5085(2013).

[16] V A Lifton, G Lifton, S Simon. Options for additive rapid prototyping methods (3D printing) in MEMS technology. Rapid Prototyping J, 20, 403-412(2014).

[17] E MacDonald, R Wicker. Multiprocess 3D printing for increasing component functionality. Science, 353, aaf2093(2016).

[18] R B Wicker, E W MacDonald. Multi-material, multi-technology stereolithography. Virtual Phys Prototyping, 7, 181-194(2012).

[19] Kief C J, Aarestad J, Macdonald E, Shemelya C, Roberson D A et al. Printing multi-functionality: additive manufacturing for CubeSats. In AIAA SPACE 2014 Conference and Exposition, AIAA SPACE Forum 4193 (AIAA, 2014). https://doi.org/10.2514/6.2014-4193

[20] M Liang, C Shemelya, E MacDonald, R Wicker, H Xin. 3D printed microwave patch antenna via fused deposition method and ultrasonic wire mesh embedding technique. IEEE Antennas Wireless Propag Lett, 14, 1346-1349(2015).

[21] C Shemelya, F Cedillos, E Aguilera, D Espalin, D Muse et al. Encapsulated copper wire and copper mesh capacitive sensing for 3-D printing applications. IEEE Sens J, 15, 1280-1286(2015).

[22] Ready S, Whiting G, Ng T N. Multi-material 3D printing. In NIP & Digital Fabrication Conference, 2014 International Conference on Digital Printing Technologies 120–123 (2014)..

[23] P Pa, Z Larimore, P Parsons, M Mirotznik. Multi-material additive manufacturing of embedded low-profile antennas. Electron Lett, 51, 1561-1562(2015).

[24] A J Lopes, E MacDonald, R B Wicker. Integrating stereolithography and direct print technologies for 3D structural electronics fabrication. Rapid Prototyping J, 18, 129-143(2012).

[25] S H Jang, S T Oh, I H Lee, H C Kim, H Y Cho. 3-Dimensional circuit device fabrication process using stereolithography and direct writing. Int J Precis Eng Man, 16, 1361-1367(2015).

[26] Bijadi S. Feasibility of additive manufacturing method for developing stretchable and flexible embedded circuits (University of Minnesota, Minneapolis, USA, 2014). .

[27] M Vatani, Y Lu, E D Engeberg, J W Choi. Combined 3D printing technologies and material for fabrication of tactile sensors. Int J Precis Eng Man, 16, 1375-1383(2015).

[28] Hedges M. 3D Printed Electronics via Aerosol Jet (Neotech, 2014). .

[29] Hedges M. Optomec. https://www.optomec.com (2017). . https://www.optomec.com

[30] Cai F, Pavlidis S, Papapolymerou J, Chang Y H, Wang K et al. Aerosol jet printing for 3-D multilayer passive microwave circuitry. In IEEE European Microwave Conference (IEEE, 2014) . http://do.org/10.1109/EuMC.2014.6986483

[31] Runge D. 3D-Printing und gedruckte Elektronik für die Medizintechnik (University of Applied Science Bremerhaven, Bremen Area, Germany, 2016). .

[32] Voxel8. https://www.voxel8.com (2017). . https://www.voxel8.com

[33] Dickey M. Liquid metals for soft and stretchable electronics. In Stretchable Bioelectronics for Medical Devices and Systems. Microsystems and Nanosystems (Springer, Cham, 2016) . https://doi.org/10.1007/978-3-319-28694-5_1

[34] M T Rahman, A Rahimi, S Gupta, R Panata. Microscale additive manufacturing and modeling of interdigitated capacitive touch sensors. Sensor Actuat A-Phys, 248, 94-103(2016).

[35] J Donnell, M Kim, H Yoon. A review on electromechanical devices fabricated by additive manufacturing. ASME J Manuf Sci E-T, 139, 010801(2017).

[36] B Thompson, H S Yoon. Aerosol-printed strain sensor using PEDOT: PSS. IEEE Sens J, 13, 4256-4263(2013).

[37] K E Madden, A D Deshpande. On integration of additive manufacturing during the design and development of a rehabilitation robot: a case study. ASME J Mech Des, 137, 111417(2015).