[1] A Kojima, K Teshima, Y Shirai et al. Organometal halide perovskitesas visible-light sensitizers for photovoltaic cells. J Am Chem Soc, 131, 6050(2009).
[2] G Xing, N Mathews, S S Lim et al. Low-temperature solution-processed wavelength-tunable perovskites for lasing. Nat Mater, 13, 476(2014).
[3] A Miyata, A Mitioglu, P Plochocka et al. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites. Nat Phys, 11, 582(2015).
[4] M A Green, A Ho-Baillie, H J Snaith. The emergence of perovskite solar cells. Nat Photonics, 8, 506(2014).
[5] J Zhao, G Kong, S Chen et al. Single crystalline CH3NH3PbI3 self-grown on FTO/TiO2 substrate for high efficiency perovskite solar cells. Sci Bull, 62, 1173(2017).
[6] J H Im, C R Lee, J W Lee et al. 6.5% effcient perovskite quantum-dot-sensitized solar cell. Nanoscale, 3, 4088(2011).
[7] H S Kim, C R Lee, J H Im et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with effciency exceeding 9%. Sci Rep, 2, 591(2012).
[8] J Burschka, N Pellet, S J Moon et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature, 499, 316(2013).
[9] F Hao, C C Stoumpos, Z Liu et al. Controllable perovskite crystallization at a gas–solid interface for hole conductor-free solar cells with steady power conversion efciency over 10%. J Am Chem Soc, 136, 16411(2014).
[10] J H Im, I H Jang, N Pellet et al. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells. Nat Nanotech, 9, 927(2014).
[11] W Tan, A R Bowring, A C Meng et al. Thermal stability of mixed cation metal halide perovskites in air. ACS Appl Mater Interfaces, 10, 5485(2018).
[12] S H Wang, Y Jiang, E J Juarez-Perez et al. Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour. Nat Energy, 2, 16195(2017).
[13] T Zhang, X Meng, Y Bai et al. Profiling the organic cation-dependent degradation of organolead halide perovskite solar cells. J Mater Chem A, 5, 1103(2017).
[14] Y C Zhao, W Zhou, H Tan et al. Mobile-ion-induced degradation of organic hole-selective layers in perovskite solar cells. J Phys Chem C, 121, 14517(2017).
[15] J W Lee, D H Kim, H S Kim et al. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell. Adv Energy Mater, 5, 1501310(2015).
[16] D P McMeekin, G Sadoughi, W Rehman et al. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells. Science, 351, 151(2016).
[17] M Saliba, T Matsui, K Domanski et al. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science, 354, 206(2016).
[18] T Duong, H K Mulmudi, H Shen et al. Structural engineering using rubidium iodide as a dopant under excess lead iodide conditions for high efficiency and stable perovskites. Nano Energy, 30, 330(2016).
[19] S H Turren-Cruz, A Hagfeldt, M Saliba. Methylammonium-free, high-performance and perovskite solar cells on a planar architecture. Science, 362, 6413(2018).
[20] W Li, J Li, G Niu et al. Effect of cesium chloride modification on the film morphology and UV-induced stability of planar perovskite solar cells. J Mater Chem A, 4, 11688(2016).
[21] Y Zhao, K Zhu. CH3NH3Cl-assisted one-step solution growth of CH3NH3PbI3: Structure, charge-carrier dynamics, and photovoltaic properties of perovskite.solar cells. J Phys Chem C, 118, 9412(2014).
[22] M I Dar, N Arora, P Gao et al. Investigation regarding the role of chloride in organic–inorganic halide perovskites obtained from chloride containing precursors. Nano Lett, 14, 6991(2014).
[23] S Colella, E Mosconi, G Pellegrino et al. Elusive presence of chloride in mixed halide perovskite solar cells. J Phys Chem Lett, 5, 3532(2014).
[24] Q Chen, H P Zhou, Y H Fang et al. Te optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells. Nat Commun, 6, 7269(2015).
[25] M I Saidaminov, J Kim, A Jain et al. Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air. Nat Energy, 3, 648(2018).
[26] X J Zheng, C C Wu, S K Jha et al. Improved phase stability of formamidinium lead triiodide perovskite by strain relaxation. ACS Energy Lett, 1, 1014(2016).
[27] G Kieslich, S Sun, A K Cheetham. Solid-state principles applied to organic-inorganic perovskites: New tricks for an old dog. Chem Sci, 5, 4712(2014).
[28] J Navas, A Sánchez-Coronilla, J J Gallardo et al. New insights on the organic-inorganic hybrid perovskite CH3NH3PbI3 nanoparticles. Experimental and theoretical study of doping in Pb2+ sites with Sn2+, Sr2+, Cd2+ and Ca2+. Nanoscale, 7, 6216(2015).
[29] D Y Son, J W Lee, Y J Choi et al. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells. Nat Energy, 1, 16081(2016).
[30] G H J Zheng, L Li, L G Wang et al. The investigation of anamidine-based additive in the perovskite films and solar cells. J Semicond, 38, 014001(2017).
[31] F Wang, S Bai, W Tress et al. Defects engineering for high performance perovskite solar cells. npj Flex Electron, 2, 22(2018).
