Effect of Scanning Speed on Properties of Laser Surface Remelting Layer of CuCr Alloy

Xu Wang; Gang Yu; Xiuli He; Shaoxia Li; Chongxin Tian; Jiayun Shao; Baohua Liu

doi:10.3788/LOP202259.0114006

[1] Zhang X H, Zhang Y, Tian B H et al. Review of nano-phase effects in high strength and conductivity copper alloys[J]. Nanotechnology Reviews, 8, 383-395(2019).

[2] Xian A P. Cu-Cr contact materials for high power vacuum interrupters[J]. The Chinese Journal of Nonferrous Metals, 11, 731-740(2001).

[3] Chai L J, Zhou Z M, Xiao Z P et al. Evolution of surface microstructure of Cu-50Cr alloy treated by high current pulsed electron beam[J]. Science China Technological Sciences, 58, 462-469(2015).

[4] Wang Y H, Sun Z B, Zhou X et al. Effects of cooling rates on solidification of CuCr25 alloys[J]. Rare Metal Materials and Engineering, 35, 1289-1293(2006).

[5] Chen Y H, Ren S B, Zhao Y et al. Microstructure and properties of CuCr alloy manufactured by selective laser melting[J]. Journal of Alloys and Compounds, 786, 189-197(2019).

[6] Shuai C J, Yang Y W, Wu P et al. Laser rapid solidification improves corrosion behavior of Mg-Zn-Zr alloy[J]. Journal of Alloys and Compounds, 691, 961-969(2017).

[7] Li M Y, Chao M J, Liang E J et al. Investigation on laser surface modification of copper[J]. Chinese Journal of Lasers, 38, 0803001(2011).

[8] Zhao J Z, Ahmed T, Jiang H X et al. Solidification of immiscible alloys: a review[J]. Acta Metallurgica Sinica (English Letters), 30, 1-28(2017).

[9] Zhao S Z, Jin J B, Xie M et al. Effects of scanning speed on microstructure and wear resistance of Cu80Fe20 immiscible coatings prepared by laser cladding[J]. Chinese Journal of Lasers, 46, 0302005(2019).

[10] Majumdar J D, Manna I. Laser surface alloying of copper with chromium-I. Microstructural evolution[J]. Materials Science and Engineering A, 268, 216-226(1999).

[11] Majumdar J D, Manna I. Laser surface alloying of copper with chromium-II. Improvement in mechanical properties[J]. Materials Science and Engineering A, 268, 227-235(1999).

[12] Liang S H, Fan Z K. Structure and properties of CuCr50 prepared by laser fast remelt[J]. Laser Technology, 24, 388-391(2000).

[13] Miao B H, Zhang Y, Chang X H et al. CuCr50 alloy contactor by laser alloying[J]. Applied Laser, 19, 253-255, 288(1999).

[14] Tian B H, Zhang Y, Liu Y. Preparation and properties of Cu-Cr alloy coating on Cu matrix by laser surface alloying[J]. Advanced Materials Research, 581/582, 467-470(2012).

[15] Si S H, Zhang H, He Y Z et al. Liquid phase separation and the aging effect on mechanical and electrical properties of laser rapidly solidified Cu100-xCrx alloys[J]. Metals, 5, 2119-2127(2015).

[16] Liu J, Zhou Z M, Tu J et al. Microstructure and properties of CuCr50 processed by laser surface treatment[J]. Surface Technology, 45, 169-174(2016).

[17] Zhang L T, Yu G, He X L et al. Phase separated characteristics affected by cooling rate of immiscible Cu-Cr alloy by laser surface melting[J]. Journal of Alloys and Compounds, 772, 209-217(2019).

[18] Zhang C L, Lü P, Cai J et al. The microstructure and properties of tungsten alloying layer on copper by high-current pulse electron beam[J]. Applied Surface Science, 422, 582-590(2017).

[19] Li Z Y, Yu G, He X L et al. Numerical and experimental investigations of solidification parameters and mechanical property during laser dissimilar welding[J]. Metals, 8, 799(2018).