Microstructure and Properties of Ti2SC-Ti2Ni Composite Structural Phase Self-Lubricating Laser Cladding Layer on TC4 Surface

Tiangang Zhang; Qian Zhang; Huaifeng Zhuang; Peng Xue; Bo Yao; Yutong Xu; Baoxuan Li

doi:10.3788/AOS202040.1114001

[1] Zhao W, Zha G C, Kong F X et al. Strengthening effect of incremental shear deformation on Ti alloy clad plate with a Ni-based alloy laser-clad layer[J]. Journal of Materials Engineering and Performance, 26, 2411-2416(2017).

[2] Zhang T G, Sun R L. Microstructure and properties of nano-Ti3Al laser cladding layer prepared on Ti811 alloy surface[J]. Chinese Journal of Lasers, 45, 0102002(2018).

[3] Wu W L, Sun J F, Dong S M et al. Influence of processing parameters on microstructure and wear resistance of Ti+TiC laser clad layer on titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 16, 2096-2099(2006).

[4] Paydas H, Mertens A, Carrus R et al. Laser cladding as repair technology for Ti-6Al-4V alloy: Influence of building strategy on microstructure and hardness[J]. Materials & Design, 85, 497-510(2015).

[5] Zhang T G, Zhuang H F, Yao B et al. -09-20)[2020-01-17][EB/OL]. properties of Ti-based laser cladding layer., 20190920, 001(2019). https://doi.org/10.13801/j.cnki.fhclxb.

[6] Huang S, Zhao J X, Sheng J et al. Effect of laser peening with different power densities on vibration fatigue resistance of hydrogenated TC4 titanium alloy[J]. International Journal of Fatigue, 131, 105335(2020).

[7] He B, Xing M, Yang G et al. Effect of composition gradient on microstructure and properties of laser deposition TC4/TC11 interface[J]. Acta Metallurgica Sinica, 55, 1251-1259(2019).

[9] Zhang K M, Zou J X, Li J et al. Surface modification of TC4 Ti alloy by laser cladding with TiC+Ti powders[J]. Transactions of Nonferrous Metals Society of China, 20, 2192-2197(2010).

[10] Li J N[M]. Technology and application of laser cladding(2016).

[11] Wu F, Chen T, Wang H J et al. Effect of Mo on microstructures and wear properties of in situ synthesized Ti(C, N)/Ni-based composite coatings by laser cladding[J]. Materials, 10, 1047(2017).

[12] Quazi M M, Fazal M A. Haseeb A S M A, et al. A review to the laser cladding of self-lubricating composite coatings[J]. Lasers in Manufacturing and Materials Processing, 3, 67-99(2016).

[13] Wang Z W, Zhuang S G, Liu H Q et al. Research progress and development trend of self-lubricating composite coatings by laser cladding[J]. Surface Technology, 47, 104-112(2018).

[14] Zhai Y J, Liu X B, Qiao S J et al. Characteristics of laser clad α-Ti/TiC+(Ti,W)C1-x/Ti2SC+TiS composite coatings on TA2 titanium alloy[J]. Optics & Laser Technology, 89, 97-107(2017).

[15] Li L Y. Study on wear-resistant and anti-friction composite coatings of Ni-based by semiconductor laser cladding[D]. Tianjin: Tianjin Polytechnic University(2016).

[16] Liu X B, Meng X J, Liu H Q et al. Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti-6Al-4V alloy[J]. Materials & Design, 55, 404-409(2014).

[17] Ochonogor O F, Meacock C, Abdulwahab M et al. Effects of Ti and TiC ceramic powder on laser-cladded Ti-6Al-4V in situ intermetallic composite[J]. Applied Surface Science, 263, 591-596(2012).

[18] Zhang T G, Zhuang H F, Xiao H Q et al. Effect of rare earth on microstructure and friction and wear properties of Ti-based laser cladding layer[J]. Chinese Journal of Lasers, 46, 0903001(2019).

[19] Li A N, Wei C L, Liu J J et al. Microstructure, friction and wear properties of laser cladding Fe-based Cr3C2/MoS2 coatings[J]. China Surface Engineering, 28, 77-85(2015).

[20] Zhang H X. Investigation on microstructures and wear resistance of ceramics and Ti-Al-Si composite coatings on titanium alloys by laser cladding[D]. Jinan: Shandong University(2016).

[21] Feng S R, Tang H B, Zhang S Q et al. Microstructure and wear resistance of laser clad TiB-TiC/TiNi-Ti2Ni intermetallic coating on titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 22, 1667-1673(2012).

[22] Wan F F. Study on the preparation and properties of ternary layered carbide Ti2SC[D]. Wuhan: Wuhan University of Technology(2010).

[23] Massalaki T B. Binary alloy phase diagrams[M]. Ohio:American Society for Metals, Metals Park(1990).

[24] Laeng J, Xiu Z M, Xu X X et al. Phase formation of Ni-Ti via solid state reaction[J]. Physica Scripta, T129, 250-254(2007).

[25] Liang B Y, Wang L, Wang Z W et al. Synthesis of Ti2SC material by self-propagation high temperature synthesis[J]. Materials Science and Engineering of Powder Metallurgy, 18, 675-679(2013).

[26] Bramfitt B L. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron[J]. Metallurgical Transactions, 1, 1987-1995(1970).

[27] Zhu W B, Song J H, Mei B C. Kinetics and microstructure evolution of Ti2SC during in situ synthesis process[J]. Journal of Alloys and Compounds, 566, 191-195(2013).

[28] Kudielka H, Rohde H. Strukturuntersuchungen an carbosulfiden von titan und zirkon[J]. Zeitschrift Für Kristallographie, 114, 447-456(1960).

[29] Mueller M H, Knott H W. The crystal structures of Ti2Cu, Ti2Ni, Ti4Ni2O, and Ti4Cu2O[J]. Transactions of American Institute of Metallurgical Engineers, 227, 674-678(1963).

[30] Weng F, Yu H J, Chen C Z et al. Fabrication of Co-based coatings on titanium alloy by laser cladding with CeO2 addition[J]. Materials and Manufacturing Processes, 31, 1461-1467(2016).