[1] K Wang, L W Li, Y Lan et al. Application research of chaotic carrier frequency modulation technology in two-stage matrix converter. Math Probl Eng, 2019, 1(2019).
[2] K Wang, S Z Zhou, Y T Zhou et al. Synthesis of porous carbon by activation method and its electrochemical performance. Int J Electrochem Sci, 13, 10766(2018).
[3] Y Z Long, L J Zhang, Z J Chen et al. Electronic transport in single polyaniline and polypyrrole microtubes. Phys Rev B, 71, 165412(2005).
[4] K Wang, L W Li, X Wen et al. Electrodeposition synthesis of PANI/MnO2/graphene composite materials and its electrochemical performance. Int J Electrochem Sci, 12, 8306(2017).
[5] K Wang, J B Pang, L W Li et al. Synthesis of hydrophobic carbon nanotubes/reduced graphene oxide composite films by flash light irradiation. Front Chem Sci Eng, 12, 376(2018).
[6] H J Qiu, W Z Song, X X Wang et al. A Calibration-free self-powered sensor for vital sign monitoring and finger tap communication based on wearable triboelectric nanogenerator. Nano Energy, 58, 536(2019).
[7] X X Wang, W Z Song, M H You et al. Bionic single electrode electronic skin unit based on piezoelectric nanogenerator. ACS Nano, 12, 8588(2018).
[8] C J Chien, S S Deora, P C Chang et al. Flexible symmetric supercapacitors based on TiO2 and carbon nanotubes. IEEE Trans Nanotechnol, 10, 706(2011).
[9] H Chen, A R Iyer, R G Harley et al. Dynamic grid power routing using controllable network transformers (CNTs) with decoupled closed-loop controller. IEEE Trans Ind Appl, 51, 2361(2015).
[10] M Tabib-Azar, Y Xie. Sensitive NH3OH and HCl gas sensors using self-aligned and self-welded multiwalled carbon nanotubes. IEEE Sens J, 7, 1435(2007).
[11] M Shahshahan, P Keinänen, J Vuorinen. The effect of ultrasonic dispersion on the surface chemistry of carbon nanotubes in the Jeffamine D-230 polyetheramine medium. IEEE Trans Nanotechnol, 16, 741(2017).
[12] J Cheon, S Choi, Y J Heo et al. Fabrication of n-type CNT field-effect transistor using energy band engineering layer between CNT and electrode. IEEE Electron Device Lett, 34, 1436(2013).
[13] Y Z Long, M M Li, W M Sui et al. Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites. Chin Phys B, 18, 1221(2009).
[14] Z Zhang, J G Delgado-Frias. Carbon nanotube SRAM design with metallic CNT or removed metallic CNT tolerant approaches. IEEE Trans Nanotechnol, 11, 788(2012).
[15] J Zheng, B Sun, Y Z Lonf et al. Fabrication of nanofibers by low-voltage near-field electrospinning. Adv Mater Res, 486, 60(2012).
[16] Z T Yang, J Xu, J Q Wang et al. Design and preparation of self-driven BSA surface imprinted tubular carbon nanofibers and their specific adsorption performance. Chem Eng J, 373, 923(2019).
[17] A Gyulassy, A Knoll, K C Lau et al. Interstitial and interlayer ion diffusion geometry extraction in graphitic nanosphere battery materials. IEEE Trans Visual Comput Graph, 22, 916(2016).
[18] G W Park, J B Yoo, G J Kim. Fabrication of spherical CNT skeins formed by self-entangled fibers from hollow type mesoporous silica microcapsules. J Ind Eng Chem, 76, 457(2019).
[19] R A Dubin, i G Callegari, J Kohn et al. Carbon nanotube fibers are compatible with mammalian cells and neurons. IEEE Trans NanoBiosci, 7, 11(2008).
[20] Y C Lee, M H Li, Y T Cheng et al. Electroplated Ni-CNT nanocomposite for micromechanical resonator applications. IEEE Electron Device Lett, 33, 872(2012).
[21] H Li, E J Jr Evans, C B Mullins et al. Ethanol decomposition on Pd-Au alloy catalysts. J Phys Chem C, 122, 22024(2018).
[22] H Li, G Henkelman. Dehydrogenation selectivity of ethanol on close-packed transition metal surfaces: a computational study of monometallic, Pd/Au, and Rh/Au catalysts. J Phys Chem C, 121, 27504(2017).
[23] H Li, K Shin, G Henkelman. Effects of ensembles, ligand, and strain on adsorbate binding to alloy surfaces. J Chem Phys, 149, 1(2018).
[24] H Li, L Luo, P Kunal et al. Oxygen reduction reaction on classically immiscible bimetallics: a case study of RhAu. J Phys Chem C, 122, 2712(2018).
[25] Y H Hwang, D Seo, M Roy et al. Capillary flow in PDMS cylindrical microfluidic channel using 3-D printed mold. J Microelectromechan Syst, 25, 238(2016).
[26] H H Guo, L Lou, X D Chen et al. PDMS-coated piezoresistive NEMS diaphragm for chloroform vapor detection. IEEE Electron Device Lett, 33, 1078(2012).
[27] D Ryu, N Castaño. Multivariate characterization of light emission from ZnS: Cu-PDMS self-sensing composites under cyclic tensile strains. IEEE Sens Lett, 2, 1(2018).
[28] Y B Zhu, B Yang, J Q Liu et al. An integrated flexible harvester coupled triboelectric and piezoelectric mechanisms using PDMS/MWCNT and PVDF. J Microelectromechan Syst, 24, 513(2015).
[29] H Y Liao, J R Ho, S K Chang-Jian. Fabrication of carbon nanotube field-emission cathodes by laser-induced transfer of carbon nanotubes and silver paste. J Display Technol, 10, 1083(2014).
[30] A R Binesh, R Kamali. Effects of chirality on single-file water permeability and diffusivity through single wall carbon nanotubes. Micro Nano Lett, 12, 109(2017).
[31] Q R Zhang, Y Han, L C Wu. Influence of electrostatic field on the adsorption of phenol on single-walled carbon nanotubes: A study by molecular dynamics simulation. Chem Eng J, 363, 278(2019).
[32] R M Chen, J Liang, J Lee et al. Variability study of MWCNT local interconnects considering defects and contact resistances—Part I: pristine MWCNT. IEEE Trans Electron Devices, 65, 4955(2018).
[33] V M Nguyen, g I Yang, Y Jung et al. Resonance raman study of I2-intercalated single-walled carbon nanotubes. IEEE Trans Nanotechnol, 6, 126(2007).
[34] T J Tsai, P C Wang. Preparation and characterization of aqueous dispersions based on single-walled carbon nanotubes functionalized with carboxyl anthracenes. The 12th International Microsystems, Packaging, Assembly and Circuits Technology Conference, 299(2017).
[35] Y C Tang, Z B Zhao, H Hu et al. Highly stretchable and ultrasensitive strain sensor based on reduced graphene oxide microtubes-elastomer composite. ACS Appl Mater Interfaces, 7, 27432(2015).
[36] Y R Jeong, H Park, S W Jin et al. Highly stretchable and sensitive strain sensors using fragmentized graphene foam. Adv Funct Mater, 25, 4228(2015).
[37] J Jacimovic, L Felberbaum. Electro-mechanical properties and welding characteristics of Ag/MoS2, Ag/WS2, Ag/CNTs and Ag/CdO materials for high-DC current contact applications. The 27th International Conference on Electrical Contacts, 132(2014).
[38] C H Chang, C H Chien. Functionalized single-walled carbon-nanotube-blended P3HT-based thin-film transistors with multiwalled carbon-nanotube source and drain electrodes. IEEE Electron Device Lett, 32, 1457(2011).
[39] E Ilarion, S I Spiridon, B F Monea. Comparative study of gas sensing microsensors based on sulfonated CNTs and CNTs/polyaniline mixture. International Conference and Exposition on Electrical and Power Engineering, 65(2016).
[40] M Ghodrati, i A Farmani, A Mir. Nanoscale sensor-based tunneling carbon nanotube transistor for toxic gases detection: a first-principle study. IEEE Sens J, 19, 7373(2019).
[41] L N Sha, P Gao, T T Wu et al. Chemical Ni-C bonding in Ni-carbon nanotube composite by a microwave welding method and its induced high-frequency radar frequency electromagnetic wave absorption. ACS Appl Mater Interfaces, 9, 40412(2017).
[42] L C Wu, Y Han, Q R Zhang et al. Effect of external electric field on nanobubbles at the surface of hydrophobic particles during air flotation. RSC Adv, 9, 1792(2019).
[43] C F Hu, C M Lin, W Fang. Integration of Pdms-infiltrated CNTs and Si bulk-micromachining for monolithic physical sensors application. The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, 1565(2013).
[44] J Liang, R M Chen, R Ramos et al. Investigation of Pt-salt-doped-standalone-multiwall carbon nanotubes for on-chip interconnect applications. IEEE Trans Electron Devices, 66, 2346(2019).
[45] C Silvestri, P Picciafoco, B Morana et al. Electro-thermal simulation and characterization of vertically aligned CNTs directly grown on a suspended microhotplate for thermal management applications. IEEE Sens, 2014, 827(2014).
[46] H C Jung, J H Moon, D H Baek et al. CNT/PDMS composite flexible dry electrodes for long-term ECG monitoring. IEEE Trans Biomed Eng, 59, 1472(2012).
[47] B Rezaei, N Irannejad, A A Ensafi et al. Application of modified carbon quantum dots/multiwall carbon nanotubes/pencil graphite electrode for electrochemical determination of dextromethorphan. IEEE Sens J, 16, 2219(2016).
[48] S X Xie, F Q Gao, S C Patel et al. Clinically relevant CNT dispersions with exceptionally high dielectric properties for microwave theranostic applications. IEEE Trans Biomed Eng, 61, 2718(2014).
[49] Y P Yang, C Z Luo, J J Jia et al. A wrinkled Ag/CNTs-PDMS composite film for a high-performance flexible sensor and its applications in human-body single monitoring. Nanamaterials, 9, 1(2019).
