Effect of Height on Residual Stress Distribution in Laser Deposited Thin-Walled Parts

Shaoke Yao; Qing Peng; Zhengyang Li

doi:10.3788/LOP202259.0714007

[1] Frazier W E. Metal additive manufacturing: a review[J]. Journal of Materials Engineering and Performance, 23, 1917-1928(2014).

[2] Herzog D, Seyda V, Wycisk E et al. Additive manufacturing of metals[J]. Acta Materialia, 117, 371-392(2016).

[3] Ngo T D, Kashani A, Imbalzano G et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges[J]. Composites Part B: Engineering, 143, 172-196(2018).

[4] Lewis G K, Schlienger E. Practical considerations and capabilities for laser assisted direct metal deposition[J]. Materials & Design, 21, 417-423(2000).

[5] Mercelis P, Kruth J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 12, 254-265(2006).

[6] Lu Y J, Wu S Q, Gan Y L et al. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy[J]. Optics & Laser Technology, 75, 197-206(2015).

[7] Parry L, Ashcroft I A, Wildman R D. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation[J]. Additive Manufacturing, 12, 1-15(2016).

[8] Carpenter K, Tabei A L. On residual stress development, prevention, and compensation in metal additive manufacturing[J]. Materials, 13, 255(2020).

[9] Ghasri-Khouzani M, Peng H, Rogge R et al. Experimental measurement of residual stress and distortion in additively manufactured stainless steel components with various dimensions[J]. Materials Science and Engineering: A, 707, 689-700(2017).

[10] Vastola G, Zhang G, Pei Q X et al. Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling[J]. Additive Manufacturing, 12, 231-239(2016).

[11] Shan Q B, Liu C, Yao J et al. Effects of scanning strategy on the microstructure, properties, and residual stress of TC4 titanium alloy prepared by laser melting deposition[J]. Laser & Optoelectronics Progress, 58, 1114002(2021).

[12] Zhang T G, Zhang Q, Yao B et al. Numerical simulation of temperature field and stress field of Ni-based laser cladding layer on TC4[J]. Laser & Optoelectronics Progress, 58, 0314003(2021).

[13] Li L X, Zhang D Q, Li J H et al. Residual stress analysis and shape optimization of laser cladded Ni-based alloy coatings[J]. Laser & Optoelectronics Progress, 57, 171405(2020).

[14] Walker T R, Bennett C J, Lee T L et al. A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718[J]. International Journal of Mechanical Sciences, 151, 609-621(2019).

[15] Gong C, Wang L F, Zhu G X et al. Numerical simulation of residual stress in 316L stainless steel cladding layer by laser additive manufacturing[J]. Applied Laser, 38, 402-408(2018).

[16] Shi L K, Gao S Y, Xi M Z et al. Finite element simulation for laser direct depositing processes of metallic vertical thin wall parts Ⅱ. The simulation for thermal stress field during depositing processes[J]. Acta Metallurgica Sinica, 42, 454-458(2006).

[17] Chew Y X, Pang J H L, Bi G J et al. Thermo-mechanical model for simulating laser cladding induced residual stresses with single and multiple clad beads[J]. Journal of Materials Processing Technology, 224, 89-101(2015).

[18] Alimardani M, Toyserkani E, Huissoon J P. A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process[J]. Optics and Lasers in Engineering, 45, 1115-1130(2007).

[19] Cao J, Gharghouri M A, Nash P. Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates[J]. Journal of Materials Processing Technology, 237, 409-419(2016).

[20] Mukherjee T, Zhang W, DebRoy T. An improved prediction of residual stresses and distortion in additive manufacturing[J]. Computational Materials Science, 126, 360-372(2017).

[21] Li G Q, Wang L F, Zhu G X et al. Influence of scanning patterns on residual stress of cladding layer and substrate deformation produced by hollow-ring laser cladding[J]. Surface Technology, 50, 158-170(2021).

[22] Ding J, Colegrove P, Mehnen J et al. Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts[J]. Computational Materials Science, 50, 3315-3322(2011).

[23] Heigel J C, Michaleris P, Reutzel E W. Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti-6Al-4V[J]. Additive Manufacturing, 5, 9-19(2015).

[24] Zhao X R, Iyer A, Promoppatum P et al. Numerical modeling of the thermal behavior and residual stress in the direct metal laser sintering process of titanium alloy products[J]. Additive Manufacturing, 14, 126-136(2017).

[25] Smith M C, Bouchard P J, Turski M et al. Accurate prediction of residual stress in stainless steel welds[J]. Computational Materials Science, 54, 312-328(2012).