Numerical Simulation of Temperature Field and Stress Field of Ni-Based Laser Cladding Layer on TC4 Surface

Zhang Tiangang; Zhang Qian; Yao Bo; Li Baoxuan

doi:10.3788/LOP202158.0314003

[1] Xu W F, Ma J, Luo Y X et al. Microstructure and high-temperature mechanical properties of laser beam welded TC4/TA15 dissimilar titanium alloy joints. Transactions of Nonferrous Metals Society of China, 30, 160-170(2020).

[2] Wang H, Wu M P, Lu P P et al. Effect of laser power on the mechanical properties of the cobalt-based/GO composite coatings. Laser & Optoelectronics Progress, 57, 091405(2020).

[3] Zhang T G, Zhuang H F, Xiao H Q et al. Effect of rare earth on microstructure and friction and wear properties of Ti-based laser cladding layer. Chinese Journal of Lasers, 46, 0903001(2019).

[4] Sun R L, Niu W, Lei Y W et al. Microstructure and tribological properties of laser clad NiCrBSi+Ni/MoS2 coating on TC4 titanium alloy. Transactions of Materials and Heat Treatment, 35, 157-162(2014).

[5] Huo H, Liang Z Y, Zhang A F et al. Anisotropy of mechanical properties of laser-cladding-deposited TC4 titanium alloy containning boron. Chinese Journal of Lasers, 46, 1202008(2019).

[6] Zhao S J, Qi W J, Huang Y H et al. Numerical simulation study on thermal cycle characteristics of temperature field of TC4 surface laser cladding Ni60 based coating. Surface Technology, 49, 301-308(2020).

[7] Guo W, Li K K, Chai R X et al. Numerical simulation and experiment of dilution effect in laser cladding 304 stainless steel. Laser & Optoelectronics Progress, 56, 051402(2019).

[8] Zhang S. Fabrication and numerical simulation of cobalt-based composite coating on titanium alloy surface by laser cladding(2015).

[9] Wang L F, Sun Y X, Zhu G X et al. Optimization simulation of process parameters on the residual stress in 316L stainless steel by laser cladding. Applied Laser, 39, 376-380(2019).

[10] Lu X F, Lin X, Ma L et al. Effect of scanning path on thermo-mechanical field of laser solid forming TC4 part. Journal of Materials Engineering, 47, 55-62(2019).

[11] Wang J Y, Ge Z M, Zhou Y B. Aeronautical titanium alloy(1985).

[12] Wood R A, Wood R A, Favor R J, Favor R J. 钛合金手册(1983).

. Titanium alloy handbook(1983).

[14] Peng S D. Experimental and numerical simulation of laser welding for titanium alloy lap welding(2006).

[15] Cao J, Gharghouri M A, Nash P. Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates. Journal of Materials Processing Technology, 237, 409-419(2016).

[16] Dai K, Shaw L. Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders. Acta Materialia, 52, 69-80(2004).

[17] Xu Z L. Performance and strength design and engineering application of high temperature metal materials(2006).

[18] Liu G. Numerical simulation of plasma cladded nickel-based powder process on high manganese steel and the structure properties analysis(2016).

[19] Wang C Q. Solidification microstructure and stress control of Ni-based alloy coatings by mechanical vibration assisted laser cladding(2013).

[20] Hu M J. Three dimensional numerical simulation of temperature and stress distribution in electron beam welding of 12 mm TC4 titanium alloy plate(2005).

[21] Zhang L, Chen X M, Liu W et al. Formation mechanism and sensitivity of cracks in laser-cladded Ni-based-alloy coatings. Laser & Optoelectronics Progress, 56, 111401(2019).

[22] Liu H Q, Ge C, Wang Z W et al. Research progress on crack control of laser clad composite coating. Heat Treatment of Metals, 43, 228-232(2018).

[23] Li M Y, Cai C B, Han B et al. Numerical simulation of preheating on temperature and stress fields by laser cladding Ni-based ceramic coating. Transactions of Materials and Heat Treatment, 36, 197-203(2015).

[24] Zhang T G, Zhuang H F, Xue P et al. Microstructure refinement mechanism and properties of Ti-based rare earth laser cladding layers. Acta Aeronautica et Astronautica Sinica, 41, 423553(2020).