• Laser & Optoelectronics Progress
  • Vol. 58, Issue 8, 0810016 (2021)
Le Kang, Shilei Jiang*, Guobin Sun, Yuhao Zhang, and Weiguo Liu
Author Affiliations
  • School of Optoelectronic Engineering, Xi'an Technological University, Xi'an, Shaanxi 710021, China
  • show less
    DOI: 10.3788/LOP202158.0810016 Cite this Article Set citation alerts
    Le Kang, Shilei Jiang, Guobin Sun, Yuhao Zhang, Weiguo Liu. Simulation Study on Ion Beam Polishing with Changing Aperture by Diaphragm Method[J]. Laser & Optoelectronics Progress, 2021, 58(8): 0810016 Copy Citation Text show less
    References

    [1] Song C, Tian Y, Shi F et al. Process optimization for cylindrical single-crystal silicon mirror with a tilted incident ion beam figuring[J]. Acta Optica Sinica, 40, 1222001(2020).

    [2] Fei M M, Chen Z L, Liu W G et al. Experimental research on sapphire crystal induced by low energy Kr + ion beam[J]. Acta Photonica Sinica, 48, 0616004(2019).

    [3] Yang G Y, Cai M Q, Li J Y et al. Preparation of subwavelength nanostructures based on low-energy ion bombardment[J]. Acta Optica Sinica, 40, 1736001(2020).

    [4] Chen G, Liu D Q, Ma C et al. Optical spectra and surface morphologies of near-infrared narrow band-pass filters using dual ion beam sputtering[J]. Acta Optica Sinica, 40, 2131001(2020).

    [5] Zhao G X, Chen H Q, Yang G G. Acceptable error of etching depth in ion beam etching microlens[J]. Acta Optica Sinica, 19, 113-116(1999).

    [6] Zhang X Y, Tang Q L, Zhang Z et al. Concave refractive microlens arrays fabricated by ion beam etching[J]. Acta Optica Sinica, 21, 485-490(2001).

    [7] Wu J F, Lu Z W, Zhang H X et al. Optimized dwell time solution for optics in ion beam figuring[J]. Acta Optica Sinica, 30, 192-197(2010).

    [8] Li Q S, Cheng Y, Cai F Z et al. Dwell time algorithm in computer controlled optical surfacing[J]. Optical Technology, 25, 56-59(1999).

    [9] Yang L. Advanced optical manufacture technology[M](2001).

    [10] Carnal C L, Egert C M, Hylton K W. Advanced matrix-based algorithm for ion-beam milling of optical components[J]. Proceedings of SPIE, 1752, 54-62(1992). http://www.sciencedirect.com/science/article/pii/0141635993900223

    [11] Peng X Q, Dai Y F, Li S Y et al. Dwell time algorithm for MRF of axis-symmetrical aspherical parts[J]. Journal of National University of Defense Technology, 26, 89-92(2004).

    [12] Yu M, Yang L, Wan Y J. Optimizing analyse on dwell-time parameters[J]. Optics & Optoelectronic Technology, 4, 5-7(2006).

    [13] Deng W J, Zheng L G, Shi Y L et al. Dwell time algorithm based on matrix algebra and regularization method[J]. Optics and Precision Engineering, 15, 1009-1015(2007).

    [14] Shi F, Dai Y F, Peng X Q et al. Dwell time algorithm based on vector for MRF process of optics[J]. Journal of National University of Defense Technology, 31, 103-106(2009).

    [15] Wang Y N, Jiang S L, Sun G B et al. Ion beam polishing equivalent removal and polishing experiments[J]. Laser & Optoelectronics Progress, 57, 032501(2020).

    Le Kang, Shilei Jiang, Guobin Sun, Yuhao Zhang, Weiguo Liu. Simulation Study on Ion Beam Polishing with Changing Aperture by Diaphragm Method[J]. Laser & Optoelectronics Progress, 2021, 58(8): 0810016
    Download Citation