• Acta Optica Sinica
  • Vol. 43, Issue 11, 1112006 (2023)
Jing Zhao, Long Zhu, Zhenyu Wu, and Fei Dong*
Author Affiliations
  • School of Electrical Engineering and Automation, Anhui University, Hefei 230601, Anhui, China
  • show less
    DOI: 10.3788/AOS222181 Cite this Article Set citation alerts
    Jing Zhao, Long Zhu, Zhenyu Wu, Fei Dong. Reduction of Accumulated Error in Linear Motor Mover Position Measurement Based on Self-Adjusting Measurement Reference Chart[J]. Acta Optica Sinica, 2023, 43(11): 1112006 Copy Citation Text show less
    References

    [1] Zhao J, Wang W W, Zhou Y et al. Rapid-precision velocity measurement of a linear motor based on weighted peak fitting of the transformed sequence[J]. Optics and Precision Engineering, 30, 574-583(2022).

    [2] Cao W, Qiao J J, Sun M. Backstepping control of disturbance estimation and compensation for permanent magnet linear motor[J]. Control and Decision, 35, 1409-1414(2020).

    [3] Li Z Z, Li S K, Wang X Z. Source and mask optimization using stochastic parallel gradient descent algorithm in optical lithography[J]. Acta Optica Sinica, 34, 0911002(2014).

    [4] Zheng L G, Hao T, Guo C L et al. Phase analysis in computer-generated holograms induced by direct laser writing systems with orthogonality error[J]. Acta Optica Sinica, 36, 1012005(2016).

    [5] Amaro-Seoane P, Audley H, Babak S et al. Laser interferometer space antenna[EB/OL]. https://arxiv.org/abs/1702.00786

    [6] Deepu Vijay M, Singh B, Bhuvaneswari G. Position sensor-less synchronous reluctance generator-based grid-tied wind energy conversion system with adaptive observer control[J]. IEEE Transactions on Sustainable Energy, 11, 693-702(2020).

    [7] Hu D T, Lü S K, Guo Y X et al. A fiber Bragg grating force sensor with a sensitization structure[J]. IEEE Sensors Journal, 21, 3042-3048(2021).

    [8] Zhang Z P, Yang X F. The application of laser heterodyne interference technology in lithography[J]. Laser & Optoelectronics Progress, 59, 0922017(2022).

    [9] Huang T, Du W Z, Su K et al. Laser microwelding technology and equipment for cross-scale collimator grid of deep-space exploration satellite[J]. Chinese Journal of Lasers, 49, 1002402(2022).

    [10] Wang H R, Dong M L, Sun G K et al. Remote sensing satellite structure in-orbit thermal strain Bragg fiber grating monitoring method[J]. Infrared and Laser Engineering, 51, 20220202(2022).

    [11] Li D D, Lu W K, Zuo F. Research on temperature compensation for an optical fiber displacement sensor[J]. Process Automation Instrumentation, 42, 78-82(2021).

    [12] Zhang L Z, Yang T, Wu Y et al. Image measurement-based two-stage control of the Stewart platform[J]. Opto-Electronic Engineering, 49, 220019(2022).

    [13] Zheng X, Huang H Y, Mao Y J et al. Research on image measurement of explosion shock waves based on high-speed schlieren technology[J]. Optics and Precision Engineering, 30, 2187-2194(2022).

    [14] Lou Q, Lü J H, When L H et al. High-precision camera calibration method based on sub-pixel edge detection[J]. Acta Optica Sinica, 42, 2012002(2022).

    [15] Ye P, Zhang M, Ma W L et al. Improved climbing algorithm for digital image correlation displacement measurements[J]. Laser & Optoelectronics Progress, 57, 021506(2020).

    [16] Wang H, Zhao J, Zhao J W et al. The position detection method of a linear motor mover based on an extended phase correlation algorithm[J]. IET Science, Measurement & Technology, 11, 921-928(2017).

    [17] Zhao J, Zhou Y, Zhao J W et al. Precision position measurement of PMSLM based on ApFFT and temporal sinusoidal fringe pattern phase retrieval[J]. IEEE Transactions on Industrial Informatics, 16, 7591-7601(2020).

    [18] Zhao J W, Wang H, Zhao J et al. Precise positioning of a linear motor mover directly from the phase difference analysis[J]. IEEE/ASME Transactions on Mechatronics, 25, 1566-1577(2020).

    [19] Xu F, Yao E T, Feng J R et al. An error compensation method for an incremental pull-wire displacement sensor based on PSO-BP neural network[J]. Chinese Journal of Sensors and Actuators, 35, 335-341(2022).

    [20] Yue G, Sun W B, Zhang X M et al. Accumulated error elimination method for aerial array image stitching[J]. Infrared and Laser Engineering, 50, 20200529(2021).

    [21] Zhan J G, Wang Y, Shi H L et al. Removing correlative errors in GRACE data by the smoothness prior method[J]. Chinese Journal of Geophysics, 58, 1135-1144(2015).

    [22] Yu W X, Hu X T, Zou Z Q. Research on the systematic error correction in grating-based nanometrology[J]. Acta Metrologica Sinica, 101-105(2002).

    [23] Yue G, Sun W B, Zhang X M et al. Accumulated error elimination method for aerial array image stitching[J]. Infrared and Laser Engineering, 50, 20200529(2021).

    [24] Zhao J W, Gong K G, Zhao J et al. Position measurement for a linear motor mover based on an aperiodic sinusoidal stripe image[J]. Optics and Precision Engineering, 27, 889-900(2019).

    [25] Rasmy L, Sebari I, Ettarid M. Automatic sub-pixel co-registration of remote sensing images using phase correlation and Harris detector[J]. Remote Sensing, 13, 2314(2021).

    [26] Mathew M, Wisner B, Ridwan S et al. A bio-inspired frequency-based approach for tailorable and scalable speckle pattern generation[J]. Experimental Mechanics, 60, 1103-1117(2020).

    [27] Wang H, Zhao J, Zhao J W et al. The position detection method of a linear motor mover based on an extended phase correlation algorithm[J]. IET Science, Measurement & Technology, 11, 921-928(2017).

    Jing Zhao, Long Zhu, Zhenyu Wu, Fei Dong. Reduction of Accumulated Error in Linear Motor Mover Position Measurement Based on Self-Adjusting Measurement Reference Chart[J]. Acta Optica Sinica, 2023, 43(11): 1112006
    Download Citation