[1] Jiang M H. Crystal and optoelectronic functional materials[J]. Functional Materials Information, 1, 3-10(2004).

[2] Nilsson J, Payne D N. High-power fiber lasers[J]. Science, 332, 921-922(2011).

[3] Richardson D J, Nilsson J, Clarkson W A. High power fiber lasers: current status and future perspectives[J]. Journal of the Optical Society of America B, 27, B63-B92(2010).

[4] Beier F, Hupel C, Nold J et al. Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier[J]. Optics Express, 24, 6011-6020(2016).

[5] Parker S I, Kenney C J, Segal J. 3D: a proposed new architecture for solid-state radiation detectors[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 395, 328-343(1997).

[6] Soleimani N, Ponting B, Gebremichael E et al. Coilable single crystal fibers of doped-YAG for high power laser applications[J]. Proceedings of SPIE, 8959, 895903(2013).

[7] von Gomperz E. Untersuchungen an einkristalldrähten[J]. Zeitschrift für Physik A Hadrons and Nuclei, 8, 184-190(1922).

[8] Labelle H E, Mlavsky A I. Growth of sapphire filaments from the melt[J]. Nature, 216, 574-575(1967).

[10] Burrus C A, Stone J. Single-crystal fiber optical devices: a Nd∶YAG fiber laser[J]. Applied Physics Letters, 26, 318-320(1975).

[11] Mimura T, Hiyamizu S, Fujii T et al. A new field-effect transistor with selectively doped GaAs/n-AlxGa1-xAs heterojunctions[J]. Japanese Journal of Applied Physics, 19, L225-L227(1980).

[12] Bridges T J, Hasiak J S, Strnad A R. Single-crystal AgBr infrared optical fibers[J]. Optics Letters, 5, 85-86(1980).

[13] Que W X, Zhou Y, Lam Y L et al. Cladding and characteristics of LiNbO3 single crystal fibre[J]. Journal of Modern Optics, 47, 1127-1136(2000).

[14] Ribeiro R M. Fiasca A B A, dos Santos P A M, et al. Optical activity measurements in the photorefractive Bi12TiO20 single crystal fibers[J]. Optical Materials, 10, 201-205(1998).

[15] Nubling R K, Harrington J A. Optical properties of single-crystal sapphire fibers[J]. Applied Optics, 36, 5934-5940(1997).

[16] Yang P Z, Deng P Z, Xu J et al. Growth of high-quality single crystal of 30 at% Yb∶YAG and its laser performance[J]. Journal of Crystal Growth, 216, 348-351(2000).

[17] Fukuda T, Rudolph P, Uda S. Fiber crystal growth from the melt[M]. Berlin, Heidelberg: Springer(2004).

[18] Fukuda T, Chani V I. Shaped crystals: growth by micro-pulling-down technique[M]. Berlin, Heidelberg: Springer(2007).

[19] Shaw L B, Bayya S, Kim W et al. Fabrication of cladded single crystal fibers for all-crystalline fiber lasers. [C]∥Proceedings of 2018 OSA International Conference on Specialty Optical Fibers, July 2-5, 2018, Zurich, Switzerland. Washington, D. C.: OSA, SoW2H, 3(2018).

[20] Shen Y H. Sapphire fiber thermometer ranging from the room temperature to 1800 ℃[J]. Acta Optica Sinica, 20, 83-87(2000).

[21] Ye L H, Song L, Li G et al. Growth and characteristics of Ce 3+ ions-doped YAG single-crystal optical fibers for LED white light sources [J]. Acta Optica Sinica, 29, 169-171(2009).

[22] Wang Y L, Wang Q. Research progress in single-crystal fiber amplifiers[J]. Laser & Optoelectronics Progress, 55, 100006(2018).

[23] Kim W, Florea C, Baker C et al. Single crystal fibers for high power lasers[J]. Proceedings of SPIE, 8547, 85470K(2012).

[24] Nie C D, Bera S, Harrington J A. Growth of single-crystal YAG fiber optics[J]. Optics Express, 24, 15522-15527(2016).

[25] Thapa R, Gibson D, Gattass R R et al. Fusion splicing of highly dissimilar YAG crystal fiber and silica fiber with reaction bonding[J]. Optical Materials Express, 6, 2560-2566(2016).

[26] Myers J D, Kim W, Shaw L B et al. Development of thin film claddings for single crystal optical fiber. [C]∥2018 Novel Optical Materials and Applications, July 2-5, 2018, Zurich, Switzerland. Washington, D. C.: OSA, NoTu4D, 4(2018).

[27] Lai C C, Gao W T, Nguyen D H et al. Toward single-mode active crystal fibers for next-generation high-power fiber devices[J]. ACS Applied Materials & Interfaces, 6, 13928-13936(2014).

[28] Dubinskii M, Zhang J, Fromzel V et al. Low-loss ‘crystalline-core/crystalline-clad’ (C4) fibers for highly power scalable high efficiency fiber lasers[J]. Optics Express, 26, 5092-5101(2018).

[29] Huang K Y, Hsu K Y, Jheng D Y et al. Low-loss propagation in Cr 4+∶YAG double-clad crystal fiber fabricated by sapphire tube assisted CDLHPG technique [J]. Optics Express, 16, 12264-12271(2008).

[30] Sangla D, Martial I, Aubry N et al. High power laser operation with crystal fibers[J]. Applied Physics B, 97, 263-273(2009).

[31] Délen X, Piehler S, Didierjean J et al. 250 W single-crystal fiber Yb∶YAG laser[J]. Optics Letters, 37, 2898-2900(2012).

[32] Li Y, Miller K, Johnson E G et al. Lasing characteristics of Ho∶YAG single crystal fiber[J]. Optics Express, 24, 9751-9756(2016).

[33] Zhang Y M, Qian G Q, Xiao X S et al. A yttrium aluminosilicate glass fiber with graded refractive index fabricated by melt-in-tube method[J]. Journal of the American Ceramic Society, 101, 1616-1622(2018).

[34] Xie Y Y, Liu Z J, Cong Z H et al. All-fiber-integrated Yb∶YAG-derived silica fiber laser generating 6 W output power[J]. Optics Express, 27, 3791-3798(2019).