[1] Huang W D, Lin X. Research progress in laser solid forming of high performance metallic component[J]. Materials China, 29, 12-27(2010).
[2] Ye J G. The application of the laser rapid prototyping technology in the mould design[J]. Metal Materials and Metallurgy Engineering, 38, 43-45, 49(2010).
[3] Kruth J P, Leu M C, Nakagawa T. Progress in additive manufacturing and rapid prototyping[J]. CIRP Annals, 47, 525-540(1998).
[5] Mazumder J, Choi J, Nagarathnam K et al. The direct metal deposition of H13 tool steel for 3-D components[J]. JOM, 49, 55-60(1997).
[6] Sachs E, Cima M, Williams P et al. Three dimensional printing: rapid tooling and prototypes directly from a CAD model[J]. Journal of Engineering for Industry, 114, 481-488(1992).
[7] Wu X H, Liang J, Mei J F et al. Microstructures of laser-deposited Ti-6Al-4V[J]. Materials & Design, 25, 137-144(2004).
[9] Buchbinder D, Schleifenbaum H, Heidrich S et al. High power selective laser melting (HP SLM) of aluminum parts[J]. Physics Procedia, 12, 271-278(2011).
[10] Martin J H, Yahata B D, Hundley J M et al. 3D printing of high-strength aluminium alloys[J]. Nature, 549, 365-369(2017).
[11] Dinda G P, Dasgupta A K, Mazumder J. Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability[J]. Materials Science and Engineering: A, 509, 98-104(2009).
[13] J rvinen J P, Matilainen V, Li X Y et al. Characterization of effect of support structures in laser additive manufacturing of stainless steel[J]. Physics Procedia, 56, 72-81(2014).
[14] Ziętala M, Durejko T, Polański M et al. The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping[J]. Materials Science and Engineering: A, 677, 1-10(2016).
[15] Liu Y. Li a., Cheng X, et al. Effects of heat treatment on microstructure and tensile properties of laser melting deposited AISI 431 martensitic stainless steel[J]. Materials Science and Engineering: A, 666, 27-33(2016).
[16] Wang Y D, Tang H B, Fang Y L et al. Effect of heat treatment on microstructure and mechanical properties of laser melting deposited 1Cr12Ni2WMoVNb steel[J]. Materials Science and Engineering: A, 528, 474-479(2010).
[17] Wauthle R, Vrancken B, Beynaerts B et al. Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures[J]. Additive Manufacturing, 5, 77-84(2015).
[18] Dong Z, Kang H, Xie Y et al. Effect of powder oxygen content on microstructure and mechanical properties of a laser additively-manufactured 12CrNi2 alloy steel[J]. Materials Letters, 236, 214-217(2019).
[19] Kang H W, Dong Z H, Zhang W et al. Laser melting deposition of a porosity-free alloy steel by application of high oxygen-containing powders mixed with Cr particles[J]. Vacuum, 159, 319-323(2019).
[20] Edmonds D V. Bainite in silicon steels: new composition-property approach part 1[J]. Metal Science, 17, 411-419(1983).
[21] Zhou K C, Zhao A M, Yin H X et al. Effect of bainite isothermal temperature on microstructure and properties of 0.2C-1.5Si-2Mn-0.43Cu-0.26Ni TRIP steel[J]. Transactions of Materials and Heat Treatment, 36, 128-133(2015).
[23] Hofer C, Winkelhofer F, Clemens H et al. Morphology change of retained austenite during austempering of carbide-free bainitic steel[J]. Materials Science and Engineering: A, 664, 236-246(2016).
[25] Garcia-Mateo C, Caballero F G, H K. Mechanical properties of low-temperature bainite[J]. Materials Science Forum, 500, 495-502(2005).
[26] Calcagnotto M, Adachi Y, Ponge D et al. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging[J]. Acta Materialia, 59, 658-670(2011).
[27] Nie W J, Wang X M, Wu S J et al. Stress-strain behavior of multi-phase high performance structural steel[J]. Science China Technological Sciences, 55, 1791-1796(2012).