• Infrared and Laser Engineering
  • Vol. 53, Issue 2, 20230543 (2024)
Wenhe Zhao1、2, Yangyang Bai1、2, Jinkai Wang1、2, and Lizhong Zhang1、2
Author Affiliations
  • 1College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China
  • 2National and Local Joint Engineering Research Center of Space and Optoelectronics Technology, Changchun University of Science and Technology, Changchun 130022, China
  • show less
    DOI: 10.3788/IRLA20230543 Cite this Article
    Wenhe Zhao, Yangyang Bai, Jinkai Wang, Lizhong Zhang. Accuracy analysis of a three-dimensional angle measurement sensor based on dual PSDs[J]. Infrared and Laser Engineering, 2024, 53(2): 20230543 Copy Citation Text show less
    References

    [1] Li Quanchao. Research on mechanism of aerial highprecision optoelectronic platfm based on universal joint[D]. Changchun: Chinese Academy of Sciences (Changchun Institute of Optics, Fine Mechanics Physics, Chinese Academy of Sciences), 2022. (in Chinese)

    [2] Guoyan Sun, Limin Gao, Jianming Bai, et al. High accuracy three-dimensional attitude angle measuring device. Optics and Precision Engineering, 24, 963-970(2016).

    [3] R Li, Y Zhen, K Di, et al. Three-degree-of-freedom autocollimator with large angle-measurement range. Measurement Science and Technology, 32, 115005(2021).

    [4] W Ren, J Cui, J Tan. A three-dimensional small angle measurement system based on autocollimation method. Review of Scientific Instruments, 93, 055102(2022).

    [5] Jiuyao Tang, Jinjun Li, Xiaobin Sun. Preparation of a pin-cushion two-dimensional position sensitive detector. Acta Optica Sinica, 25, 233-236(2005).

    [6] Hongyan Sang. Research on dynamic response characteristic of PSD with pin-cushion type. Transducer and Microsystem Technologies, 34-36(2007).

    [7] Meizhen Huang, Jiuyao Tang, Yuqing Chen. Position sensitive detector based on the lateral photoelectric effect. Electronics Optics & Control, 34-38(2000).

    [8] Jun Zheng, Wenqing Li. Calibration of 3-D measurement system based on a double position sensitive detectors. J Tsinghua Univ (Sci & Technol), 58, 411-416(2018).

    [9] M Khodarahmi, V Maihami. A review on Kalman filter models. Archives of Computational Methods in Engineering, 30, 727-747(2023).

    [10] de CacquerayValmenier M, Coskun A, Kale I. The use of almost linear phase IIR filters in DFT modulated filter banks f communication systems [C]2016 IEEE 17th International Wkshop on Signal Processing Advances in Wireless Communications (SPAWC). IEEE, 2016: 14.

    [11] V N Stavrou, I G Tsoulos, N E Mastorakis. Transformations for FIR and IIR filters’ design. Symmetry, 13, 533(2021).

    [12] J M Pak. Gaussian sum FIR filtering for 2D target tracking. International Journal of Control, Automation and Systems, 18, 643-649(2020).

    [13] P Lowenborg, H Johansson. Minimax design of adjustable-bandwidth linear-phase FIR filters. IEEE Transactions on Circuits and Systems I: Regular Papers, 53, 431-439(2006).

    [14] N Haridas, E Elias. Low-complexity technique to get arbitrary variation in the bandwidth of a digital FIR filter. IET Signal Processing, 11, 372-377(2017).

    [15] Wang Yufei, Zheng Jiaxing, Dai Dongkai, et al. A nondelay measurement method f RLG based on the combination of FIR filtering dither stripping[J]. Infrared Laser Engineering, 2023, 52(11): 20230171. (in Chinese)

    Wenhe Zhao, Yangyang Bai, Jinkai Wang, Lizhong Zhang. Accuracy analysis of a three-dimensional angle measurement sensor based on dual PSDs[J]. Infrared and Laser Engineering, 2024, 53(2): 20230543
    Download Citation