Parameter Optimization and Error Compensation of Diffraction Microlens Injection Molding Process

Xingguo Liu; Furong Huo; Changxi Xue

doi:10.3788/LOP57.052204

[1] Liu X Q, Xue C X. Design of diffractive optical elements based on axicon and its light analysis[J]. Laser & Optoelectronics Progress, 55, 040501(2018).

[2] Li L X, Liu Q, Chen J M et al. Polarization-independent broadband dielectric bilayer gratings for spectral beam combining system[J]. Optics Communications, 385, 97-103(2017).

[3] Cui Q F. Design of hybrid diffractive-refractive imaging optical systems[J]. Infrared and Laser Engineering, 35, 12-15, 38(2006).

[4] Wang D Y, Xue C X, Li C et al. Design of electronic endoscope optical system based on microlens array[J]. Acta Optica Sinica, 38, 0222003(2018).

[5] Wang Y, Meng X Y, Zhang L et al. Design of super-wide-angle mobile phone camera based on concentric lens[J]. Acta Optica Sinica, 38, 1022001(2018).

[6] Carvalho E J, Braga E S. Cescato L H D. Replication of diffractive optical elements by injection molding[J]. Proceedings of SPIE, 5622, 739-744(2004).

[7] Holthusen A K, Riemer O, Schmütz J et al. Mold machining and injection molding of diffractive microstructures[J]. Journal of Manufacturing Processes, 26, 290-294(2017).

[8] Lee B K, Kim D S, Kwon T H. Replication of microlens arrays by injection molding[J]. Microsystem Technologies, 10, 531-535(2004).

[9] Vu L T. Chen C C A, Lee C C, et al. Compensating additional optical power in the central zone of a multifocal contact lens for minimization of the shrinkage error of the shell mold in the injection molding process[J]. Applied Optics, 57, 2981-2991(2018).

[10] Lan X R, Li C, Yang C et al. Optimization of injection molding process parameters and axial surface compensation for producing an aspheric plastic lens with large diameter and center thickness[J]. Applied Optics, 58, 927-934(2019).

[11] Chen C C A, Lai C S, Yu C W et al. Study on liquid crystal polymer molding for off-axial aspherical reflective grating optical element by injection molding process[C]. AIP Conference Proceedings, 2065, 030008(2019).

[12] Kalima V, Pietarinen J, Siitonen S et al. Transparent thermoplastics: replication of diffractive optical elements using micro-injection molding[J]. Optical Materials, 30, 285-291(2007).

[13] Yang H F, Xue C X. Diffraction efficiency evaluation for diamond turning of multilayer diffractive optical elements[J]. Optical Engineering, 56, 075101(2017).

[14] Kashyap S, Datta D. Process parameter optimization of plastic injection molding: a review[J]. International Journal of Plastics Technology, 19, 1-18(2015).

[15] Dick L, Risse S, Tünnermann A. Process influences and correction possibilities for high precision injection molded freeform optics[J]. Advanced Optical Technologies, 5, 277-287(2016).

[16] Yang H F. Studies on modified scalar diffraction theory of multilayer diffractive optical elements[D]. Changchun: Changchun University of Science and Technology(2018).