SMS Fiber Structure for Temperature Measurement Using an OTDR

A. M. HATTA; K. INDRIAWATI; T. BESTARIYAN; T. HUMADA; and SEKARTEDJO

doi:10.1007/s13320-013-0104-9

[1] D. Donlagic and M. Zavrsnik, “Fiber-optic microbend sensor structure,” Optics Letters, vol. 22, no. 11, pp. 837-839, 1997.

[2] A. Kumar and R. K. Varshney, “Transmission characteristics of SMS fiber optic sensor structure,” Optics Communications, vol. 219, no. 1-6, pp. 215-219, 2003.

[3] W. S. Mohammed, P. W. E. Smith, and X. Gu, “All-fiber multimode interference bandpass filter,” Optics Letters, vol. 31, no. 17, pp. 2547-2549, 2006.

[4] A. M. Hatta, Y. Semenova, Q. Wu, and G. Farrell, “Strain sensor based on a pair of single-mode-multimode-single-mode fiber structures in a ratiometric power measurement scheme,” Applied Optics, vol. 49, no. 3, pp. 536-541, 2010.

[5] A. M. Hatta, Y. Semenova, G. Rajan, and G. Farrell, “A voltage sensor based on a singlemode-multimode- singlemode fiber structure,” Microwave and Optical Technology Letters, vol. 52, no. 8, pp. 1887-1890, 2010.

[6] Y. Gong, T. Zhao, Y. J. Rao, and Y. Wu, “All-fiber curvature sensor based on multimode interference,” Photonics Technology Letters, vol. 23, no. 11, pp. 679-681, 2011.

[7] Q. Wu, Y. Semenova, P. Wang, and G. Farrell, “High sensitivity SMS fiber structure based refractometer- analysis and experiment,” Optics Express, vol. 19, no. 9, pp. 7937-7944, 2011.

[8] T. Walbaum and C. Fallnich, “Wavelength tuning of multimode interference bandpass filters by mechanical bending: experiment and theory in comparison,” Applied Physics B, vol. 108, no. 1, pp. 117-124, 2012.

[9] S. M. Tripathi, A. Kumar, R. K. Varshney, Y. B. P. Kumar, E. Marin, and J. P. Meunier, “Strain and temperature sensing characteristics of single-mode- multimode-single-mode structures,” Journal of Lightwave Technology, vol. 27, no. 13, pp. 2348-2356, 2009.

[10] E. Li, X. Wang, and C. Zhang, “Fiber-optic temperature sensor based on interference of selective higher-order modes,” Applied Physics Letters, vol. 89, no. 9, pp. 091119-1-091119-3, 2006.

[11] E. Li, “Temperature compensation of multimode interference-based fiber devices,” Optics Letters, vol. 32, no. 14, pp. 2064-2066, 2007.

[12] S. Silva, E. G. P. Pachon, M. A. R. Franco, J. G. Hayashi, F. X. Malcata, O. Frazao, et al., “Ultrahigh-sensitivity temperature fiber sensor based on multimode interference,” Applied Optics, vol. 51, no. 16, pp. 3236-3242, 2012.

[13] A. M. Hatta, G. Rajan, Y. Semenova, and G. Farrell, “SMS fibre structure for temperature measurement using a simple intensity-based interrogation system,” Electronics Letters, vol. 45, no. 21, pp. 1069-1071, 2009.

[14] Q. Wu, Y. Semenova, A. M. Hatta, P. Wang, and G. Farrell, “Bent SMS fibre structure for temperature measurement,” Electronics Letters, vol. 46, no. 16, pp. 1129-1130, 2010.

[15] P. S. Reddy, R. S. Prasad, D. S. Gupta, M. S. Shankar, K. Srimannarayana, and P. R. Reddy, “Quasi-distributed fiber Bragg grating array sensor for furnace applications,” Photonic Sensors, vol. 2, no. 3, pp. 203-214, 2012.

[16] G. Nosenzo, B. E. Whelan, M. Brunton, D. Kay, and H. Buys, “Continuous monitoring of mining induced strain in a road pavement using fiber Bragg grating sensors,” Photonic Sensors, vol. 3, no. 2, pp. 144-158, 2013.