Recent Process in Laser Processing of Fiber-Reinforced Composites

Xuecong Zhang; Jing Qian; Jun Liu; Quanzhong Zhao

doi:10.3788/LOP57.111432

[1] Khoathane M C, Vorster O C, Sadiku E R. Hemp fiber-reinforced 1-pentene/polypropylene copolymer: the effect of fiber loading on the mechanical and thermal characteristics of the composites[J]. Journal of Reinforced Plastics and Composites, 27, 1533-1544(2008).

[2] Xue Q M. Study on laser cutting of high modulus carbon fiber reinforced plastic[D]. Harbin: Harbin Institute of Technology(2016).

[3] Yu D Y. Numerical simulation of laser cutting process of single-layer carbon fiber reinforced plastics[D]. Dalian: Dalian University of Technology(2017).

[4] Malkapuram R, Kumar V, Negi Y S. Recent development in natural fiber reinforced polypropylene composites[J]. Journal of Reinforced Plastics and Composites, 28, 1169-1189(2009).

[5] Wambua P, Ivens J, Verpoest I. Natural fibres: can they replace glass in fibre reinforced plastics?[J]. Composites Science and Technology, 63, 1259-1264(2003).

[6] Zhang H J. Study on the drilling technology of CFRP[D]. Beijing: Beihang University(1998).

[7] Bao Y J, Gao H, Li F Q. Researches on drilling CFRP(carbon fiber reinforced plastics) with diamond electroplated drill bit[J]. Diamond & Abrasives Engineering, 29, 38-42(2009).

[8] Zhang J G, Wang X C, Shen B et al. Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP[J]. International Journal of Refractory Metals and Hard Materials, 41, 285-292(2013).

[9] Yang J, Li P N, Tang S W et al. Process of drilling carbon fiber reinforced composite with diamond coated drills[J]. Machine Design & Research, 30, 119-124(2014).

[10] Liu J, Chen G, Ji C H et al. An investigation of workpiece temperature variation of helical milling for carbon fiber reinforced plastics (CFRP)[J]. International Journal of Machine Tools and Manufacture, 86, 89-103(2014).

[11] Zemann R, Kain L, Bleicher F. Vibration assisted machining of carbon fibre reinforced polymers[J]. Procedia Engineering, 69, 536-543(2014).

[12] Liu J, Zhang D Y, Qin L G et al. Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP)[J]. International Journal of Machine Tools and Manufacture, 53, 141-150(2012).

[13] Ma F J. The development of ultrasonic assisted machining system and its application in machining of composite[D]. Dalian: Dalian University of Technology(2013).

[14] Zhang J Q, Wang W, Zhang W et al[J]. Experimental study on high speed electrical discharge machining of carbon fiber-reinforced plastic Electromachining & Mould, 2014, 21-24.

[15] Lau W S, Wang M, Lee W B. Electrical discharge machining of carbon fibre composite materials[J]. International Journal of Machine Tools and Manufacture, 30, 297-308(1990).

[16] Teicher U, Müller S, Münzner J et al. Micro-EDM of carbon fibre-reinforced plastics[J]. Procedia CIRP, 6, 320-325(2013).

[17] He Z F. Research on the WEDM characteristics of carbon fiber reforced plastic[D]. Harbin: Harbin Institute of Technology(2018).

[18] Shanmugam D K, Nguyen T, Wang J. A study of delamination on graphite/epoxy composites in abrasive waterjet machining[J]. Composites Part A: Applied Science and Manufacturing, 39, 923-929(2008).

[19] Thongkaew K, Wang J, Yeoh G H. An investigation of hole machining process on a carbon-fiber reinforced plastic sheet by abrasive waterjet[J]. Advanced Materials Research, 1136, 113-118(2016).

[20] Li Z Y. Causes and elimination strategies of defects in abrasive water jet machining on polymer matrix composites[D]. Dalian: Dalian University of Technology(2019).

[21] Stock J W, Zaeh M F, Spaeth J P. Remote laser cutting of CFRP: influence of the edge quality on fatigue strength[J]. Proceedings of SPIE, 8963, 89630T(2014).

[22] Sun F, Song Y Y, Zhao Q L et al. Influence of off-axis amount on dynamics performance of gas in laser cutting process[J]. Chinese Journal of Lasers, 47, 0402003(2020).

[23] Zhang L L, Jiang Z H, Zhang W et al. A review of laser processing fiber-reinforced flexible composite material[J]. Applied Laser, 32, 238-243(2012).

[24] Negarestani R, Li L, Sezer H K et al. Nano-second pulsed DPSS Nd∶YAG laser cutting of CFRP composites with mixed reactive and inert gases[J]. The International Journal of Advanced Manufacturing Technology, 49, 553-566(2010).

[25] Riveiro A, Quintero F, Lusquiños F et al. Experimental study on the CO2 laser cutting of carbon fiber reinforced plastic composite[J]. Composites Part A: Applied Science and Manufacturing, 43, 1400-1409(2012).

[26] Tagliaferri V, di Ilio A, Visconti C. Laser cutting of fibre-reinforced polyesters[J]. Composites, 16, 317-325(1985).

[27] Caprino G, Tagliaferri V. Maximum cutting speed in laser cutting of fiber reinforced plastics[J]. International Journal of Machine Tools and Manufacture, 28, 389-398(1988).

[28] Cenna A A, Mathew P. Analysis and prediction of laser cutting parameters of fibre reinforced plastics (FRP) composite materials[J]. International Journal of Machine Tools and Manufacture, 42, 105-113(2002).

[29] Goeke A, Emmelmann C. Influence of laser cutting parameters on CFRP part quality[J]. Physics Procedia, 5, 253-258(2010).

[30] Niino H, Kawaguchi Y, Sato T et al. Laser cutting of carbon fiber reinforced plastics (CFRP) by 1 kW CW fiber laser irradiation[J]. Proceedings of SPIE, 8067, 860714(2013).

[31] Fuchs A N, Schoeberl M, Tremmer J et al. Laser cutting of carbon fiber fabrics[J]. Physics Procedia, 41, 372-380(2013).

[32] Herzog D, Schmidt-Lehr M, Canisius M et al. Laser cutting of carbon fiber reinforced plastic using a 30 kW fiber laser[J]. Journal of Laser Applications, 27, S28001(2015).

[33] Walter J, Hustedt M, Staehr R et al. Laser cutting of carbon fiber reinforced plastics-investigation of hazardous process emissions[J]. Physics Procedia, 56, 1153-1164(2014).

[34] Staehr R, Bluemel S, Hansen P et al. The influence of moisture content on the heat affected zone and the resulting in-plane shear strength of laser cut thermoplastic CFRP[J]. Plastics, Rubber and Composites, 44, 111-116(2015).

[35] Fenoughty K A, Jawaid A, Pashby I R. Machining of advanced engineering materials using traditional and laser techniques[J]. Journal of Materials Processing Technology, 42, 391-400(1994).

[36] MathewJ, Goswami GL, RamakrishnanN, et al., 1999, 89/90: 198- 203.

[37] Hua Y Q, Xiao T, Xue Q et al. Experimental study about laser cutting of carbon fiber reinforced polymer[J]. Laser Technology, 37, 565-570(2013).

[38] Leone C, Genna S. Heat affected zone extension in pulsed Nd∶ YAG laser cutting of CFRP[J]. Composites Part B: Engineering, 140, 174-182(2018).

[39] Herzog D, Jaeschke P, Meier O et al. Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP[J]. International Journal of Machine Tools and Manufacture, 48, 1464-1473(2008).

[40] Pang S Q, Liu W C. A study on the process and mechanisms of laser machining of high-performance composites[J]. Acta Armamentarii, 13, 84-91(1992).

[41] Dell'Erba M, Galantucci L M, Miglietta S. An experimental study on laser drilling and cutting of composite materials for the aerospace industry using excimer and CO2 sources[J]. Composites Manufacturing, 3, 14-19(1992).

[42] Yung K C, Mei S M, Yue T M. A study of the heat-affected zone in the UV YAG laser drilling of GFRP materials[J]. Journal of Materials Processing Technology, 122, 278-285(2002).

[43] Zhu X N, Bao W X. Fundamentals of ultrashort pulse laser and its applications[J]. Chinese Journal of Lasers, 46, 1200001(2019).

[44] Takahashi K, Tsukamoto M, Masuno S et al. Influence of laser scanning conditions on CFRP processing with a pulsed fiber laser[J]. Journal of Materials Processing Technology, 222, 110-121(2015).

[45] Li Z L, Zheng H Y, Lim G C et al. Study on UV laser machining quality of carbon fibre reinforced composites[J]. Composites Part A: Applied Science and Manufacturing, 41, 1403-1408(2010).

[46] Al-Sulaiman F A, Yilbas B S, Ahsan M. CO2 laser cutting of a carbon/carbon multi-lamelled plain-weave structure[J]. Journal of Materials Processing Technology, 173, 345-351(2006).

[47] Lau W S, Lee W B, Pang S Q. Pulsed Nd∶ YAG laser cutting of carbon fibre composite materials[J]. CIRP Annals, 39, 179-182(1990).

[48] García A J, Pilar Villar M, Araújo D et al. Carbon fiber reinforced polymers (CFRP) Nd∶YAG laser machining[J]. AIP Conference Proceedings, 2104(2004).

[49] Wahab M S, Rahim E A, Rahman N A et al. Laser cutting characteristic on the laminated carbon fiber reinforced plastics (CFRP) composite of aerospace structure panel[J]. Advanced Materials Research, 576, 503-506(2012).

[50] Bluemel S, Bastick S, Staehr R et al. Laser cutting of CFRP with a fibre guided high power nanosecond laser source-influence of the optical fibre diameter on quality and efficiency[J]. Physics Procedia, 83, 328-335(2016).

[51] Jaeschke P, Stolberg K, Bastick S et al. Cutting and drilling of carbon fiber reinforced plastics (CFRP) by 70 W short pulse nanosecond laser[J]. Proceedings of SPIE, 8963, 89630S(2014).

[52] Weber R, Freitag C, Kononenko T V et al. Short-pulse laser processing of CFRP[J]. Physics Procedia, 39, 137-146(2012).

[53] Freitag C, Wiedenmann M, Negel J P et al. High-quality processing of CFRP with a 1.1-kW picosecond laser[J]. Applied Physics A, 119, 1237-1243(2015).

[54] Salama A, Li L, Mativenga P et al. High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites[J]. Applied Physics A, 122, 73(2016).

[55] Jiang Y. Research on cutting carbon-fiber reinforced plastic with picosecond pulsed laser and its connection with aluminum alloy[D]. Changsha: Hunan University(2017).

[56] Kononenko T V, Freitag C, Komlenok M S et al. Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra-short laser pulses[J]. Journal of Applied Physics, 115, 103107(2014).

[57] Bluemel S, Staehr R, Jaeschke P et al. Determination of corresponding temperature distribution within CFRP during laser cutting[J]. Physics Procedia, 41, 408-414(2013).

[58] Canisius M, Herzog D, Schmidt-Lehr M et al. Laser cutting of carbon fiber-reinforced plastic with an absorber transparent for visible spectrum[J]. Journal of Laser Applications, 27, 032003(2015).

[59] Jaeschke P, Herzog D, Noelke C et al. Investigations into the sealing of heat damaged areas by applying polymer powders during laser cutting of carbon fiber reinforced composites[J]. Advanced Engineering Materials, 12, 587-590(2010).

[60] Niino H, Harada Y, Anzai K et al. 2D/3D laser cutting of carbon fiber reinforced plastic (CFRP) by fiber laser irradiation[J]. Proceedings of SPIE, 9353, 935303(2015).

[61] Rauh B, Kreling S, Kolb M et al. UV-laser cleaning and surface characterization of an aerospace carbon fibre reinforced polymer[J]. International Journal of Adhesion and Adhesives, 82, 50-59(2018).

[62] Freeman R K, Rigby F A, Morley N. Temperature-dependent reflectance of plated metals and composite materials under laser irradiation[J]. Journal of Thermophysics and Heat Transfer, 14, 305-312(2000).

[63] Jia B S, Tang H P, Su C Z et al. Removal of surface coating of resin matrix composites by pulsed laser[J]. Chinese Journal of Lasers, 46, 1202010(2019).

[64] Oliveira V. Sharma S P, de Moura M F S F, et al. Surface treatment of CFRP composites using femtosecond laser radiation[J]. Optics and Lasers in Engineering, 94, 37-43(2017).