Micromilling Blind Holes in Al2O3 Ceramics Using UV Laser

Xiaodong Liu; Liang Chen; Xizhao Wang; Zhengjun Xiong

doi:10.3788/LOP202158.0514005

[1] Zhang K, Liu T T, Liao W H et al. Experiment on selective laser melting forming of Al2O3 ceramics. Chinese Journal of Lasers, 43, 1002007(2016).

[2] Wang Y X. The study of femtosecond laser processing on TiC ceramic‍(2014).

[3] Zhang Z, Chen X X, Li D X et al. Study on laser preparation of groove surface micro texture of engineering ceramics. Applied Laser, 38, 64-69(2018).

[4] Chen Q. Study on micro-drilling technology based on nanosecond pulsed laser‍(2018).

[5] Bao Y M, Wang C W, Jin Z W et al. Textured surface on a bioceramic coating via a femtosecond laser and its friction and wear properties. Chinese Journal of Lasers, 46, 0203003(2019).

[6] Niu W Y, Yu A B, Wu J Z et al. Influence of laser process parameters on taper and heat affected zone of glass ceramic hole. Laser & Optoelectronics Progress, 54, 031601(2017).

[7] Cao L Z, Chen G, Hu H H. Eeffects of dielectric constant on efficiency of adjusting frequency for dielectric resonators. Electronic Components & Materials, 24, 33-34(2005).

[8] Wang A Z, Du B, Hu P et al. Accurate evaluation of critical flaw size in structural ceramics via femtosecond laser. Ceramics International, 44, 23008-23013(2018).

[9] Zhou J Z, He W Y, Xu J L et al. Strengthening mechanism and wear resistance of Al2O3/Fe901 composite coating prepared by laser cladding. Acta Optica Sinica, 39, 0514001(2019).

[10] Zhang C Y, Man W Q, Jie H et al. Research on the wetting characteristic and micro-and nanostructures of the Al2O3 ceramic surface induced by femtosecond laser. Journal of Guangzhou University （Natural Science Edition）, 16, 22-26(2017).

[11] Ni R P, Qian B, Liu C et al. Status and prospect of laser additive manufacturing of ceramic materials. Laser & Optoelectronics Progress, 55, 011408(2018).

[12] Bao J D, Huang Y X, Zhou J et al. Study on micro-structure of ceramic surface by laser processing. Laser Journal, 39, 114-117(2018).

[13] Liu Z Y, Wei X, Xie X Z et al. Experimental study about micro texture on ceramic tool surface processed by UV laser. Laser Technology, 40, 550-554(2016).

[14] Kuar A S, Doloi B, Bhattacharyya B. Modelling and analysis of pulsed Nd∶‍YAG laser machining characteristics during micro-drilling of zirconia （ZrO2）. International Journal of Machine Tools and Manufacture, 46, 1301-1310(2006).

[15] Kuar A S, Acherjee B, Ganguly D et al. Optimization of nd： YAG laser parameters for microdrilling of alumina with multiquality characteristics via grey-taguchi method. Materials and Manufacturing Processes, 27, 329-336(2012).

[16] Yuan G F, Zeng X Y. Experimental study of laser milling on Al2O3 ceramics. Chinese Journal of Lasers, 30, 467-470(2003).

[17] Xu Z M, Meng X K, Qu Y R et al. Process parameter optimization of Al2O3 ceramics milled with nanosecond pulsed laser. Laser & Optoelectronics Progress, 56, 231404(2019).

[18] Luo Y H, Wang X Y. Morphology investigation of removal particles during laser cutting of Al2O3 ceramics based on vapor-to-melt ratio. Journal of Materials Processing Technology, 255, 340-346(2018).

[19] Zhao W Q, Mei X S, Wang W J. Ultrashort pulse laser drilling of micro-holes（part 1）： theoretical study. Infrared and Laser Engineering, 48, 0106008(2019).

[20] Chen G Y, Zhu Z C, Yin J et al. Experiment on ablation threshold of single crystal diamond produced by femtosecond laser processing. Chinese Journal of Lasers, 46, 0402001(2019).

[21] Lou D Y, Xiong H, Wu Y G et al. Damage threshold and drilling mechanism of aluminum plate by nanosecond laser with different pulse widths. Laser Technology, 41, 427-432(2017).

[22] Zhao W Q, Wang L Z, Yu Z S et al. A processing technology of grooves by picosecond ultrashort pulse laser in Ni alloy： Enhancing efficiency and quality. Optics & Laser Technology, 111, 214-221(2019).