[1] 1李闯, 张明, 魏小辉, 等. 飞机起落架收放液压系统设计、分析与实验验证[J]. 南京航空航天大学学报, 2014, 46(2): 225-231. doi: 10.3969/j.issn.1005-2615.2014.02.008LIC, ZHANGM, WEIX H, et al. Design, analysis and experimental validation for hydraulic extension/retraction system of aircraft landing gears[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2014, 46(2): 225-231. (in Chinese). doi: 10.3969/j.issn.1005-2615.2014.02.008
[2] 2刘涌泉, 李巍, 牛伟, 等. 航空液压系统流量智能预测方法研究[J]. 科学技术与工程, 2022, 22(28): 12476-12483.LIUY Q, LIW, NIUW, et al. Intelligent flow forecasting method of aviation hydraulic system[J]. Science Technology and Engineering, 2022, 22(28): 12476-12483. (in Chinese)
[3] 3胡振磊. 安全滤网及其抗堵塞能力浅析[J]. 中国机械, 2019(18): 154-155.HUZ L. Analysis of safety filter screen and its anti-blocking ability[J]. Machine China, 2019(18): 154-155. (in Chinese)
[4] S FOTOVATI, SA HOSSEINI, HV TAFRESHI et al. Modeling instantaneous pressure drop of pleated thin filter media during dust loading. Chemical Engineering Science, 66, 4036-4046(2011).
[5] 5钱锋. 精密微小孔的加工技术研究[J]. 现代制造技术与装备, 2015(5): 52-54. doi: 10.3969/j.issn.1673-5587.2015.05.022QIANF. Research on machining technology of precision micro hole[J]. Modern Manufacturing Technology and Equipment, 2015(5): 52-54. (in Chinese). doi: 10.3969/j.issn.1673-5587.2015.05.022
[6] N Chen, HN Li, J Wu et al. Advances in micro milling: from tool fabrication to process outcomes. International Journal of Machine Tools and Manufacture, 160, 103670(2021).
[7] 7弯艳玲, 杨健. 高速微钻削构建孔阵列疏水表面[J]. 长春理工大学学报(自然科学版), 2018, 41(4): 60-63.WANY L, YANGJ. Micro-hole array hydrophobic surface by high speed micro-drilling technology[J]. Journal of Changchun University of Science and Technology, 2018, 41(4): 60-63. (in Chinese)
[8] S JITHIN, S S JOSHI. Surface topography generation and simulation in electrical discharge texturing: a review. Journal of Materials Processing Technology, 298, 117297(2021).
[9] N RAVI, SHAN XUE CHUAN. The effects of electro-discharge machining block electrode method for microelectrode machining. Journal of Micromechanics and Microengineering, 12, 532-540(2002).
[10] D WANG, J WU, W ZHAO et al. Micro tool electrode fabrication using edge electrode discharge grinding(2010).
[11] 11翁明浩. 微细阵列轴孔的电火花和电化学加工工艺研究[D]. 哈尔滨: 哈尔滨工业大学, 2007.WENGM H. Study on EDM and Electrochemical Machining Technology of Micro-Array Shaft Hole[D]. Harbin: Harbin Institute of Technology, 2007. (in Chinese)
[12] 12王峰, 赵昌辉, 张恩元. 高速电火花小孔加工工艺及应用[J]. 中国新技术新产品, 2016(20): 68. doi: 10.3969/j.issn.1673-9957.2016.20.050WANGF, ZHAOC H, ZHANGE Y. Small hole machining technology and application of high speed EDM[J]. New Technology & New Products of China, 2016(20): 68.(in Chinese). doi: 10.3969/j.issn.1673-9957.2016.20.050
[13] NS QU, XF ZHANG, XL CHEN et al. Modified microscale pattern transfer without photolithography of substrates. Journal of Materials Processing Technology, 218, 71-79(2015).
[14] X ZHANG, N QU, X. FANG. Sandwich-like electrochemical micromachining of micro-dimples using a porous metal cathode. Surface and Coatings Technology, 311, 357-364(2017).
[15] X FANG, N QU, Y ZHANG et al. Improvement of hole exit accuracy in electrochemical drilling by applying a potential difference between an auxiliary electrode and the anode. Journal of Materials Processing Technology, 214, 556-564(2014).
[16] Y ZHANG, N QU, X FANG et al. Eliminating spikes by optimizing machining parameters in electrochemical drilling. Journal of Manufacturing Processes, 37, 488-495(2019).
[17] X WANG, N QU, X FANG et al. Electrochemical drilling with constant electrolyte flow. Journal of Materials Processing Technology, 238, 1-7(2016).
[18] D ZHU, W WANG, X L FANG et al. Electrochemical drilling of multiple holes with electrolyte-extraction. CIRP Annals, 59, 239-242(2010).
[19] 19王维. 群小孔电解加工的关键技术研究[D]. 南京: 南京航空航天大学, 2010.WANGW. Research on Key Technology of Electrolytic Machining of Group Small Holes[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010. (in Chinese)
[20] 20解孟涛, 刘俊标, 王鹏飞, 等. 电子束曲面直写的Monte Carlo仿真与实验[J]. 光学 精密工程, 2022, 30(18): 2232-2240. doi: 10.37188/OPE.20223018.2232XIEM T, LIUJ B, WANGP F, et al. Monte Carlo simulation and experiments of electron beam direct writing on curved[J]. Opt. Precision Eng., 2022, 30(18): 2232-2240. (in Chinese). doi: 10.37188/OPE.20223018.2232
[21] Y ZHANG, Z SHEN, X NI. Modeling and simulation on long pulse laser drilling processing. International Journal of Heat and Mass Transfer, 73, 429-437(2014).
[22] 22李鹏举, 潘登, 刘顺利. 长焦深连续立方相位板的飞秒激光加工与性能测试[J]. 光学 精密工程, 2022, 30(17): 2088-2093. doi: 10.37188/OPE.20223017.2088LIP J, PAND, LIUS L. Continuous cubic phase plate with long depth of focus fabricated by femtosecond laser and its optical performance[J]. Opt. Precision Eng., 2022, 30(17): 2088-2093. (in Chinese). doi: 10.37188/OPE.20223017.2088
[23] 23杨立军, 孔宪俊, 王扬, 等. 激光微孔加工技术及应用[J]. 航空制造技术, 2016, 59(19): 30-38.YANGL J, KONGX J, WANGY, et al. Laser micro-holes machining technology and its application[J]. Aeronautical Manufacturing Technology, 2016, 59(19): 30-38. (in Chinese)
[24] G KAMLAGE, T BAUER, A OSTENDORF et al. Deep drilling of metals by femtosecond laser pulses. Applied Physics A, 77, 307-310(2003).
[25] Y F WANG, F YANG, G Y ZHANG et al. Fabrication of deep and small holes by synchronized laser and shaped tube electrochemical machining (Laser-STEM) hybrid process. The International Journal of Advanced Manufacturing Technology, 105, 2721-2731(2019).
[26] MD NGUYEN, M RAHMAN, YSAN WONG. Simultaneous micro-EDM and micro-ECM in low-resistivity deionized water. International Journal of Machine Tools and Manufacture, 54/55, 55-65(2012).
[27] 27余毅权. 激光脉冲电解射流复合加工技术试验研究[D]. 南京: 南京航空航天大学, 2011.YUY Q. Experimental Study on Composite Machining Technology of Laser Pulse Electrolytic Jet[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2011. (in Chinese)
[28] Y ZHANG, Z XU, D ZHU et al. Tube electrode high-speed electrochemical discharge drilling using low-conductivity salt solution. International Journal of Machine Tools and Manufacture, 92, 10-18(2015).
[29] 29刘坤坤, 孙伶俐, 何声馨, 等. 316不锈钢电解抛光最佳参数试验研究[J]. 表面技术, 2018, 47(8): 288-294.LIUK K, SUNL L, HES X, et al. Experimental study on optimal parameters of electrolytic polishing of 316 stainless steel[J]. Surface Technology, 2018, 47(8): 288-294. (in Chinese)