Parameters Optimization and Friction and Wear Properties for Laser Cladding Ni60AA Coating on 45 Steel Shaft Surface

Jun Wu; Dongdong Zhu; Richu Yang; Siyu Wu; Yan Huang; Yuliang Zhang

doi:10.3788/LOP202158.1114008

[1] Chen J F, Li X P, Xue Y P et al. Friction and wear properties of laser cladding Fe901 alloy coating on 45 steel surface[J]. Chinese Journal of Lasers, 46, 0502001(2019).

[2] Liu A L, Sui C Y, Li F Z et al. Correlation between plasma characteristics and forming defects during laser additive manufacturing of ceramics[J]. Chinese Journal of Lasers, 47, 0602005(2020).

[3] He S Y, Liu X D, Zhao S Z et al. Microstructure and wear resistance of carbon fibers reinforced 316L stainless steel prepared using laser cladding[J]. Chinese Journal of Lasers, 47, 0502010(2020).

[4] Lee J S, Kitagawa Y, Nakanishi T et al. Passivation behavior of type-316L stainless steel in the presence of hydrogen sulfide ions generated from a local anion generating system[J]. Electrochimica Acta, 220, 304-311(2016).

[5] del Río T G, Garrido M A, Fernández J E et al. Influence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings[J]. Journal of Materials Processing Technology, 204, 304-312(2008).

[6] Zeng D W, Xia H, Xie C S et al. Microstructure and solidification process of the laser clad Ni alloy[J]. Rare Metal Materials and Engineering, 29, 109-113(2000).

[7] He L J, Zhao X J, Wang H et al. Microstructure and properties of nickel-based alloy powder laser cladding on 45 steel substrate[J]. Special Casting & Nonferrous Alloys, 35, 909-912(2015).

[8] Zhang J, Hu Y, Tan X J et al. Microstructure and high temperature tribological behavior of laser cladding Ni60A alloys coatings on 45 steel substrate[J]. Transactions of Nonferrous Metals Society of China, 25, 1525-1532(2015).

[9] Hemmati I, Ocelík V, de Hosson J T M et al. Effects of the alloy composition on phase constitution and properties of laser deposited Ni-Cr-B-Si coatings[J]. Physics Procedia, 41, 302-311(2013).

[10] Xu Z F, Jiao J K, Zhang Z et al. Research on laser repair process of Ni-based superalloy[J]. Materials Reports, 33, 3196-3202(2019).

[11] Erfanmanesh M, Pour H A, Semnani H M et al. An empirical-statistical model for laser cladding of WC-12Co powder on AISI 321 stainless steel[J]. Optics & Laser Technology, 97, 180-186(2017).

[12] Xiao B, Zhang Y W. Marangoni and buoyancy effects on direct metal laser sintering with a moving laser beam[J]. Numerical Heat Transfer A, 51, 715-733(2007).

[13] Lin X P, Peng X F, Wang B X et al. Analysis of the flow and heat transfer in the melting process[J]. Journal of Engineering Thermophysics, 19, 62-65(1998).

[14] Huang F X. An investigation on microstructure and properties of Ni-based alloy by laser cladding and laser cladding forming[D], 36-61(2011).

[15] Wang S G, Shi T, Fu G Y et al. Analysis of dilution rate and single channel morphology of high-speed cladding Cr50Ni alloy by laser inside-beam powder feeding process[J]. Surface Technology, 49, 311-318(2020).

[16] Zhu G X, Zhang A F, Li D C et al. Effect of process parameters on surface smoothness in laser cladding[J]. Chinese Journal of Lasers, 37, 296-301(2010).

[17] Jin S W, He X L, Wu Y et al. Laser power attenuation by powder flow in coaxial laser cladding[J]. Chinese Journal of Lasers, 38, 0903005(2011).

[18] Paul C P, Mishra S K, Tiwari P et al. Solid-particle erosion behaviour of WC/Ni composite clad layers with different contents of WC particles[J]. Optics & Laser Technology, 50, 155-162(2013).

[19] Sharma S P, Dwivedi D K, Jain P K et al. Effect of La2O3 addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatings[J]. Wear, 7, 853-859(2009).

[20] Zhang M F, Zhang Y C, Zhang F Y et al. Numerical analysis on blowing-suction cleaning flow field between subway rails[J]. Journal of Harbin Institute of Technology, 52, 137-143(2020).

[21] Zhou Y Z. A matrix analysis of orthogonal design[J]. Mathematics in Practice and Theory, 39, 202-207(2009).

[22] Guo C, Zhou J S, Chen J M et al. High temperature wear resistance of laser cladding NiCrBSi and NiCrBSi/WC-Ni composite coatings[J]. Wear, 270, 492-498(2011).

[23] Wang W, Cui H Z, Wang Z N et al. Microstructure and wear mechanism of induction quenching 50CrMo4 steel[J]. Transactions of Materials and Heat Treatment, 36, 62-68(2015).