[1] Zheng Xuebin, Xie Youtao. Progress on biomedical ceramic coating prepared by thermal spraying[J]. Journal of Inorganic Materials, 2013, 28(1):12-20.

[2] Xue Weichang, Zheng Xuebin, Liu Xuanyong, et al.. Crystallinity of hydroxyapatite coating on its impact in vivo degradation and osteogenic properties[C]. Seventh International Thermal Spray Seminar Papers, 2004: 39-42.

[3] Gineste L, Gineste M, Ranz X, et al.. Degradation of hydroxylapatite, fluorapatite, and fluorhydroxyapatite coatings of dental implants in dogs[J]. Journal of Biomedical Materials Research, 1999, 48(3): 224-234.

[4] Wang S A, William R L, Jack E L. Interfacial shear strength and histology of plasma sprayed and sintered hydroxyapatite implants in vivo[J]. Biomaterials, 1996, 17(20): 1965-1970.

[5] Khor K, Gu Y, Quek C, et al.. Plasma spraying of functionally graded hydroxyapatite/Ti-6Al-4V coatings[J]. Surface and Coatings Technology, 2003, 168(2-3): 195-201.

[6] Morales J G, Clemente R R, Armas B, et al.. Controlled nucleation and growth of thin hydroxyapatite layers on titanium implants by using induction heating technique[J]. Langmuir, 2004, 20(13): 5174-5178.

[7] Man H, Zhao N, Cui Z. Surface morphology of a laser surface nitrided and etched Ti-6Al-4V alloy[J]. Surface and Coatings Technology, 2005, 192(2-3): 341-346.

[8] Chen M, Yang X, Liu Y, et al.. Study on the formation of an apatite layer on NiTi shape memory alloy using a chemical treatment method[J]. Surface and Coatings Technology, 2003, 173(2-3): 229-234.

[9] Mohseni E, Zalnezhad E, Bushroa A R. Comparative investigation on the adhesion of hydroxyapatite coating on Ti-6Al-4V implant: A review paper[J]. International Journal of Adhesion and Adhesives, 2014, 48: 238-257.

[10] Ma J, Liang C, Kong L, et al.. Colloidal characterization and electrophoretic deposition of hydroxyapatite on titanium substrate[J]. Journal of Materials Science: Materials in Medicine, 2003, 14(9): 797-801.

[11] Nahler G, Mollet A. Dictionary of Pharmaceutical Medicine[M]. New York; Springer Press, 2009.

[12] Ozeki K, Yuhta T, Aoki H, et al.. Crystal chemistry of hydroxyapatite deposited on titanium by sputtering technique[J]. Bio-Medical Materials and Engineering, 2000, 10(3-4): 221-217.

[13] Ozeki K, Yuhta T, Fukui Y, et al.. Phase composition of sputtered films from a hydroxyapatite target[J]. Surface and Coatings Technology, 2002, 160(1): 54-61.

[14] Yao Shuang, Liu Hongxi, Zhang Xiaowei, et al.. Microstructure and wear property of TiC particle reinforced composite coatings on H13 steel surface by laser in-situ synthesis[J]. Chinese J Lasers, 2014, 41(10): 1003004.

[15] Wang Dongsheng, Yang Youwen, Tian Zongjun, et al.. Process optimization of thick nanostructured ceramic coating by laser multilayer cladding based on neural network and genetic algorithm[J]. Chinese J Lasers, 2013, 40(9): 0903001.

[16] Bao Yumei, Gao Haiming, Zhang Dongming, et al.. Laser cladding bio-ceramic coating process parameters selection based on simulation of temperature field[J]. Laser & Optoelectronics Progress, 2014, 51(11): 111601.

[17] Overgaard S, Lind M, Josephsen K, et al.. Resorption of hydroxyapatite and fluorapatite ceramic coatings on weight bearing implants: a quantitative and morphological study in dogs[J]. Journal of Biomedical Materials Research, 1998, 39(1): 141-152.

[18] Barinov S, Tumanov S, Fadeeva I, et al.. Environment effect on the strength of hydroxy-and fluorohydroxyapatite ceramics[J]. Inorganic Materials 2003, 39(8): 877-880.

[19] Zhang S, Zeng X T, Weng Y S, et al.. Adhesion strength of sol-gel derived fluoridated hydroxyapatite coatings[J]. Surface and Coatings Technology, 2006, 200(22-23): 6350-6354.

[20] Olding T, Sayer M, Barrow D. Ceramic sol-gel composite coatings for electrical insulation[J]. Thin Solid Films, 2001, 398: 581-586.

[21] Hu Shuhui. Study on Microstructure and Properties of Bioceramic Coating by Laser Cladding on the Surface of Titanium Alloy[D]. Wuhan: Huazhong University of Science and Technology, 2012.

[22] Zhang Yaping, Gao Jiacheng, Wen Jing. Effect of Y2O3 on bioceramic coating by laser cladding[J]. Metal Heat Treatment, 1999, 24(10): 9-11.

[23] Tadashi K, Hiroaki T. How useful is SBF in predicting in vivo bone bioactivity[J]. Biomaterials, 2006, 27(15): 2907-2915.

[24] Yi Deliang, Wu Chengtie, Ma Xubing, et al.. A comparative study of vacuum and air plasma sprayed bioactive akermanite coating [J]. Journal of Inorganic Materials, 2014, 29(2): 172-178.

[25] Liu X Y, Tao S Y, Ding C X. Bioactivity of plasma sprayed dicalcium silicate coatings[J]. Biomaterials, 2002, 23(3): 963–968.

[26] Liu X, Ding C, Wang Z. Apatite formed on the surface of plasma sprayed wollastonite coating immersed in simulated body fluid[J]. Biomaterials, 2001, 22(14): 2007–2012.

[27] Lusquios F, Pou J, Arias J L, et al.. Production of calcium phosphate coatings on Ti6Al4V obtained by Nd:yttrium-alumniumgarnet laser cladding[J]. J Appl Phys, 2001, 90(8): 4231-4236.

[28] Zhang S, Wang Y S, Zeng X T, et al.. Evaluation of adhesion strength and toughness of fluoridated hydroxyapatite coatings[J]. Thin Solid Films, 2008, 516(16): 5162-5167.

[29] Bao Yumei, Gao Haiming, Xu Jingshun, et al.. Phase analysis of bioceramic coating by laser cladding[J]. Chinese J Lasers, 2014, 41(10): 1003005.

[30] Zhou Hongming, Zeng Lin, Yi Danqing, et al.. Research on the preparation and bioactivity of FHA coating[J]. Chinese Journal of Materials Research, 2010, 24(6): 643-648.