Removal of Liquid Crystal Polymer Flexible Copper-Clad Laminates Using Ultraviolet Laser

Li Cheng; Chao Wu; Yan Chen; Zhengjun Xiong

doi:10.3788/LOP202259.1714007

[1] Wang G A, Thompson D, Tentzeris E M et al. Low cost RF MEMS switches using LCP substrate[C], 1441-1444(2004).

[2] Thompson D, Kingsley N, Wang G A et al. RF characteristics of thin film liquid crystal polymer (LCP) packages for RF MEMS and MMIC integration[C], 857-860(2005).

[3] Chen M, Evers N, Kapusta C et al. Development of a hermetically sealed enclosure for MEMS in chip-on-flex modules using liquid crystalline polymer (LCP)[C], 2057-2060(2009).

[4] Zou J J, Cheng M S. Research progress on the application of LCP substrate in system packaging[J]. Science and Technology, 25, 124-125(2015).

[5] Tao Y L. Application of LCP in 5G products[J]. China Rubber/Plastics Technology and Equipment, 46, 32-35(2020).

[6] Liu H, Yang H F, He H D et al. Laser hybrid welding of electronic copper foil and liquid crystal polymer[J]. Chinese Journal of Lasers, 49, 0202011(2022).

[7] Kingsley N. Liquid crystal polymer: enabling next generation conformal and multilayer electronics[J]. Microwave Journal, 51, 188-200(2005).

[8] Zeng C, Gao N W, Lin Y M. The application of LCP substrate for microwave/millimeter-wave system packaging[J]. Electronics & Packaging, 10, 5-8(2010).

[9] Ma T C, Du C Z, Li X D et al. Dual frequency flexible MIMO antenna based on LCP material[C](2019).

[10] Nanbu K, Ozawa S, Yoshida K et al. Low temperature bonded Cu/LCP materials for FPCs and their characteristics[J]. IEEE Transactions on Components and Packaging Technologies, 28, 760-764(2005).

[11] Zheng H W, Li Y W, Yang M J et al. Liquid-crystalline polyester reinforced poly(bisphenol-a carbonate) composites: a state-of-the-art review[J]. Polymer Bulletin, 1-9(2019).

[12] Nie S L, Guan Y C. Review of UV laser and its applications in micromachining[J]. Opto-Electronic Engineering, 44, 1169-1179, 1251(2017).

[13] Delmdahl R, Pätzel R. Pulsed laser deposition: UV laser sources and applications[J]. Applied Physics A, 93, 611-615(2008).

[14] Rowlands M J, Das R N. Manufacture and ultra-high frequency performance of an LCP-based, Z-interconnect, flip-chip package[C], 1362-1367(2008).

[15] Zhang X. Design, fabrication and characterization of microwave passive devices on liquid crystal polymer substrates[D], 66-70(2010).

[16] Han L, Gao X F. Modeling of bending characteristics on micromachined RF MEMS switch based on LCP substrate[J]. IEEE Transactions on Electron Devices, 63, 3707-3712(2016).

[17] Gao H R. Development and application of ultraviolet laser[J]. China New Technologies and Products, 13(2010).

[18] Tang J, Liao J H, Meng H Y et al. Ultraviolet laser and its application in laser processing[J]. Laser & Optoelectronics Progress, 44, 52-56(2007).

[19] Zhao P F, Su J, Xu M Z et al. All-solid-state high stability 355 nm ultraviolet pulsed laser[J]. Journal of Quantum Optics, 26, 202-209(2020).

[20] Liu X D, Chen L, Wang X Z et al. Micromilling blind holes in Al2O3 ceramics using UV laser[J]. Laser & Optoelectronics Progress, 58, 0514005(2021).

[21] Li J K. Study on fabricating technology for film microstructure based on ultraviolet nanosecond laser pulse[D], 9-14(2018).

[22] Zhang C, Zhu J, Zhang Y et al. Advances in laser nanofabrication technology of high-molecular polymer and its application(invited)[J]. Acta Photonica Sinica, 49, 130-147(2020).

[23] Wu X F, Yin H L, Li Q. Femtosecond laser processing of carbon nanotubes film[J]. Chinese Journal of Lasers, 46, 0902002(2019).

[24] Chen Y, Chen L, Cheng L et al. Study on the preparation of transmission quartz glass grating via femtosecond laser etching[J]. Laser & Optoelectronics Progress, 59, 0714006(2022).

[25] Chen L, Liu X D, Liu J et al. Microgroove etching with femtosecond laser on quartz glass surfaces[J]. Acta Optica Sinica, 40, 2314001(2020).