[1] Zhu J H, Zhou H, Wang C et al. A review of topology optimization for additive manufacturing: status and challenges[J]. Chinese Journal of Aeronautics, 34, 91-110(2021).
[2] Talagani M R, DorMohammadi S, Dutton R et al. Numerical simulation of big area additive manufacturing (3D printing) of a full sizes car[J]. SAMPE Journal, 51, 27-36(2015).
[3] Lewis J A, Ahn B Y. Three-dimensional printed electronics[J]. Nature, 518, 42-43(2015).
[4] Joshi S C, Sheikh A A. 3D printing in aerospace and its long-term sustainability[J]. Virtual and Physical Prototyping, 10, 175-185(2015).
[5] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).
[6] Liaw C Y, Guvendiren M. Current and emerging applications of 3D printing in medicine[J]. Biofabrication, 9, 024102(2017).
[7] Guest J K, Prévost J H, Belytschko T. Achieving minimum length scale in topology optimization using nodal design variables and projection functions[J]. International Journal for Numerical Methods in Engineering, 61, 238-254(2004).
[8] Allaire G, Jouve F, Michailidis G. Thickness control in structural optimization via a level set method[J]. Structural and Multidisciplinary Optimization, 53, 1349-1382(2016).
[9] Wang Y Q, Zhang L, Wang M Y. Length scale control for structural optimization by level sets[J]. Computer Methods in Applied Mechanics and Engineering, 305, 891-909(2016).
[10] Liu J K, Li L, Ma Y S. Uniform thickness control without pre-specifying the length scale target under the level set topology optimization framework[J]. Advances in Engineering Software, 115, 204-216(2018).
[11] Xia Q, Shi T L. Constraints of distance from boundary to skeleton: for the control of length scale in level set based structural topology optimization[J]. Computer Methods in Applied Mechanics and Engineering, 295, 525-542(2015).
[12] Liu S T, Li Q H, Chen W J et al. An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures[J]. Frontiers of Mechanical Engineering, 10, 126-137(2015).
[13] Xiong Y L, Yao S, Zhao Z L et al. A new approach to eliminating enclosed voids in topology optimization for additive manufacturing[J]. Additive Manufacturing, 32, 101006(2020).
[14] Zhou L, Zhang W H. Topology optimization method with elimination of enclosed voids[J]. Structural and Multidisciplinary Optimization, 60, 117-136(2019).
[15] Wang C, Xu B, Duan Z Y et al. Additive manufacturing-oriented stress minimization topology optimization with connectivity[J]. Chinese Journal of Theoretical and Applied Mechanics, 53, 1070-1080(2021).
[16] Chen Q, Liang X, Hayduke D et al. An inherent strain based multiscale modeling framework for simulating part-scale residual deformation for direct metal laser sintering[J]. Additive Manufacturing, 28, 406-418(2019).
[17] Zhang Z D, Ibhadode O, Ali U et al. Topology optimization parallel-computing framework based on the inherent strain method for support structure design in laser powder-bed fusion additive manufacturing[J]. International Journal of Mechanics and Materials in Design, 16, 897-923(2020).
[18] Takezawa A, To A C, Chen Q et al. Sensitivity analysis and lattice density optimization for sequential inherent strain method used in additive manufacturing process[J]. Computer Methods in Applied Mechanics and Engineering, 370, 113231(2020).
[19] Serphos M R. Incorporating AM-specific manufacturing constraints into topology optimization[D], 22(2014).
[20] Meng L, Zhang W H, Quan D L et al. From topology optimization design to additive manufacturing: today’s success and tomorrow’s roadmap[J]. Archives of Computational Methods in Engineering, 27, 805-830(2020).
[23] Zhang J Z, Tang H L, Wang C et al. Latest research progress and prospect of process planning algorithms of multiaxis support-free 3D printing for complex structure[J]. Chinese Journal of Lasers, 49, 1402302(2022).
[24] Liu S T, Li Q H, Chen W J et al. Combination of topology optimization and additive manufacturing: an integration method of structural design and manufacturing[J]. Aeronautical Manufacturing Technology, 60, 26-31(2017).
[25] Liu B Y, Wang X M, Yang G et al. Research progress on topology optimization design for metal additive manufacturing[J]. Chinese Journal of Lasers, 50, 1202301(2023).
[26] Wang D, Yang Y Q, Yi Z H et al. Research on the fabricating quality optimization of the overhanging surface in SLM process[J]. The International Journal of Advanced Manufacturing Technology, 65, 1471-1484(2013).
[27] Mertens R, Clijsters S, Kempen K et al. Optimization of scan strategies in selective laser melting of aluminum parts with downfacing areas[J]. Journal of Manufacturing Science and Engineering, 136, 061012(2014).
[28] Kranz J, Herzog D, Emmelmann C. Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4[J]. Journal of Laser Applications, 27, S14001(2015).
[30] Langelaar M. An additive manufacturing filter for topology optimization of print-ready designs[J]. Structural and Multidisciplinary Optimization, 55, 871-883(2017).
[31] Langelaar M. Topology optimization of 3D self-supporting structures for additive manufacturing[J]. Additive Manufacturing, 12, 60-70(2016).
[32] Sigmund O. A 99 line topology optimization code written in Matlab[J]. Structural and Multidisciplinary Optimization, 21, 120-127(2001).
[33] Bendsøe M P, Sigmund O[M]. Topology optimization: theory, methods, and applications(2003).
[34] Leary M, Merli L, Torti F et al. Optimal topology for additive manufacture: a method for enabling additive manufacture of support-free optimal structures[J]. Materials & Design, 63, 678-690(2014).
[35] Brackett D, Ashcroft I, Hague R. Topology optimization for additive manufacturing[C](2011).
[36] Gaynor A T, Meisel N A, Williams C B et al. Topology optimization for additive manufacturing: considering maximum overhang constraint[C], 2036(2014).
[37] Garaigordobil A, Ansola R, Santamaría J et al. A new overhang constraint for topology optimization of self-supporting structures in additive manufacturing[J]. Structural and Multidisciplinary Optimization, 58, 2003-2017(2018).
[38] Kuo Y H, Cheng C C. Self-supporting structure design for additive manufacturing by using a logistic aggregate function[J]. Structural and Multidisciplinary Optimization, 60, 1109-1121(2019).
[40] Fu Y F, Rolfe B, Chiu L N S et al. Design and experimental validation of self-supporting topologies for additive manufacturing[J]. Virtual and Physical Prototyping, 14, 382-394(2019).
[41] Fu Y F, Rolfe B, Chiu L N S et al. Parametric studies and manufacturability experiments on smooth self-supporting topologies[J]. Virtual and Physical Prototyping, 15, 22-34(2020).
[42] Wang C, Zhang W H, Zhou L et al. Topology optimization of self-supporting structures for additive manufacturing with B-spline parameterization[J]. Computer Methods in Applied Mechanics and Engineering, 374, 113599(2021).
[43] Ambrozkiewicz O, Kriegesmann B. Density-based shape optimization for fail-safe design[J]. Journal of Computational Design and Engineering, 7, 615-629(2020).
[44] Wu Z J, Xiao R B. A topology optimization approach to structure design with self-supporting constraints in additive manufacturing[J]. Journal of Computational Design and Engineering, 9, 364-379(2022).
[45] Ye J, Guo Q C, Lu H J et al. Topology optimisation of self-supporting structures based on the multi-directional additive manufacturing technique[J]. Virtual and Physical Prototyping, 18, e2271458(2023).
[46] Sethian J A, Wiegmann A. Structural boundary design via level set and immersed interface methods[J]. Journal of Computational Physics, 163, 489-528(2000).
[47] Liu J K, To A C. Deposition path planning-integrated structural topology optimization for 3D additive manufacturing subject to self-support constraint[J]. Computer-Aided Design, 91, 27-45(2017).
[48] Wang Y G, Gao J C, Kang Z. Level set-based topology optimization with overhang constraint: towards support-free additive manufacturing[J]. Computer Methods in Applied Mechanics and Engineering, 339, 591-614(2018).
[49] Liu J K, Yu H C. Self-support topology optimization with horizontal overhangs for additive manufacturing[J]. Journal of Manufacturing Science and Engineering, 142, 091003(2020).
[50] Allaire G, Dapogny C, Estevez R et al. Structural optimization under overhang constraints imposed by additive manufacturing technologies[J]. Journal of Computational Physics, 351, 295-328(2017).
[51] Han Y S, Xu B, Zhao L et al. Topology optimization of continuum structures under hybrid additive-subtractive manufacturing constraints[J]. Structural and Multidisciplinary Optimization, 60, 2571-2595(2019).
[52] Bi M H, Tran P, Xie Y M. Topology optimization of 3D continuum structures under geometric self-supporting constraint[J]. Additive Manufacturing, 36, 101422(2020).
[53] Guo X, Zhou J H, Zhang W S et al. Self-supporting structure design in additive manufacturing through explicit topology optimization[J]. Computer Methods in Applied Mechanics and Engineering, 323, 27-63(2017).
[54] Zhang W H, Zhou L. Topology optimization of self-supporting structures with polygon features for additive manufacturing[J]. Computer Methods in Applied Mechanics and Engineering, 334, 56-78(2018).
[55] Zhou L, Sigmund O, Zhang W H. Self-supporting structure design with feature-driven optimization approach for additive manufacturing[J]. Computer Methods in Applied Mechanics and Engineering, 386, 114110(2021).
[56] Mass Y, Amir O. Topology optimization for additive manufacturing: accounting for overhang limitations using a virtual skeleton[J]. Additive Manufacturing, 18, 58-73(2017).
[57] He L W, Gilbert M, Johnson T et al. Conceptual design of AM components using layout and geometry optimization[J]. Computers & Mathematics with Applications, 78, 2308-2324(2019).
[58] Hu K L, Jin S, Wang C C L. Support slimming for single material based additive manufacturing[J]. Computer-Aided Design, 65, 1-10(2015).
[59] Liu Y C, Zhou M D, Wei C. Topology optimization of self-supporting infill structures[C], 1(2022).
[60] Xu W P, Miao L T, Liu L G. Review on structure optimization in 3D printing[J]. Journal of Computer-Aided Design & Computer Graphics, 29, 1155-1168(2017).
[61] Wu J, Wang C C L, Zhang X T et al. Self-supporting rhombic infill structures for additive manufacturing[J]. Computer-Aided Design, 80, 32-42(2016).
[62] Wang W M, Qian S C, Lin L P et al. Support-free frame structures[J]. Computers & Graphics, 66, 154-161(2017).
[63] Martínez J, Hornus S, Song H C et al. Polyhedral Voronoi diagrams for additive manufacturing[J]. ACM Transactions on Graphics, 37, 129(2018).
[64] Kuipers T, Wu J, Wang C C L. CrossFill: foam structures with graded density for continuous material extrusion[J]. Computer-Aided Design, 114, 37-50(2019).
[65] Xu W P, Liu Y, Yu M L et al. A support-free infill structure based on layer construction for 3D printing[J]. IEEE Transactions on Visualization and Computer Graphics, 28, 4462-4476(2022).
[66] Wu J, Aage N, Westermann R et al. Infill optimization for additive manufacturing-approaching bone-like porous structures[J]. IEEE Transactions on Visualization and Computer Graphics, 24, 1127-1140(2018).
[67] Lee M, Fang Q, Cho Y et al. Support-free hollowing for 3D printing via Voronoi diagram of ellipses[J]. Computer-Aided Design, 101, 23-36(2018).
[68] Xu W P, Zhang P, Liu Y et al. Self-supporting connectable filling structure design for 3D printing[J]. Journal of Computer-Aided Design & Computer Graphics, 35, 155-164(2023).
[69] Liu Y C, Zhou M D, Wei C et al. Topology optimization of self-supporting infill structures[J]. Structural and Multidisciplinary Optimization, 63, 2289-2304(2021).
[70] Zhou M D, Lu Y F, Liu Y C et al. Concurrent topology optimization of shells with self-supporting infills for additive manufacturing[J]. Computer Methods in Applied Mechanics and Engineering, 390, 114430(2022).
[71] Zou J, Zhang Y C, Feng Z Y. Topology optimization for additive manufacturing with self-supporting constraint[J]. Structural and Multidisciplinary Optimization, 63, 2341-2353(2021).
[72] Zhang K Q, Cheng G D, Xu L. Topology optimization considering overhang constraint in additive manufacturing[J]. Computers and Structures, 212, 86-100(2019).
[73] Wang Y, Xia J J, Luo Z et al. Self-supporting topology optimization method for selective laser melting[J]. Additive Manufacturing, 36, 101506(2020).
[74] Zou J, Mou H L. Topology optimization of self-supporting structures for additive manufacturing with adaptive explicit continuous constraint[J]. Computer Modeling in Engineering & Sciences, 132, 451-469(2022).
[75] Li Z H, Zhang D Z, Dong P et al. A lightweight and support-free design method for selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 90, 2943-2953(2017).
[76] Li Z H, Zhang D Z, Dong P et al. Incorporating draw constraint in the lightweight and self-supporting optimisation process for selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 98, 405-412(2018).
[77] Xu S Z, Liu J K, Ma Y S. Residual stress constrained self-support topology optimization for metal additive manufacturing[J]. Computer Methods in Applied Mechanics and Engineering, 389, 114380(2022).
[78] Miki T. Self-support topology optimization considering distortion for metal additive manufacturing[J]. Computer Methods in Applied Mechanics and Engineering, 404, 115821(2023).
