Effect of Pore Defects on Tensile Properties of Al-Mg-Sc-Zr Alloy Formed by Selective Laser Melting

Zhenyu Feng; Jiawei Ma; Shuo Qi; Hongyu Zhang; Kun Chen

doi:10.3788/LOP213362

[1] Xu L P, Wang Q Y, Zhou M. Micro-crack initiation and propagation in a high strength aluminum alloy during very high cycle fatigue[J]. Materials Science and Engineering: A, 715, 404-413(2018).

[2] Cao B, Shaeffer M, Cadel D et al. An analysis of strengthening mechanisms and rate-dependence in a high strength aluminum alloy[J]. Journal of Dynamic Behavior of Materials, 4, 6-17(2018).

[3] Schmidtke K, Palm F, Hawkins A et al. Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing[J]. Physics Procedia, 12, 369-374(2011).

[4] Spierings A B, Dawson K, Voegtlin M et al. Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting[J]. CIRP Annals, 65, 213-216(2016).

[5] Spierings A B, Dawson K, Kern K et al. SLM-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment[J]. Materials Science and Engineering: A, 701, 264-273(2017).

[6] Spierings A B, Dawson K, Heeling T et al. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting[J]. Materials & Design, 115, 52-63(2017).

[7] Spierings A B, Dawson K, Uggowitzer P J et al. Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys[J]. Materials & Design, 140, 134-143(2018).

[8] Spierings A B, Dawson K, Dumitraschkewitz P et al. Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition[J]. Additive Manufacturing, 20, 173-181(2018).

[9] Zhang H, Gu D D, Yang J K et al. Selective laser melting of rare earth element Sc modified aluminum alloy: thermodynamics of precipitation behavior and its influence on mechanical properties[J]. Additive Manufacturing, 23, 1-12(2018).

[10] Zhang H, Gu D D, Dai D H et al. Influence of scanning strategy and parameter on microstructural feature, residual stress and performance of Sc and Zr modified Al-Mg alloy produced by selective laser melting[J]. Materials Science and Engineering: A, 788, 139593(2020).

[11] Wang H M. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[12] Song Z. The defect tolerance evaluation method for selective laser melted titanium alloys[D](2019).

[13] Wu Z K, Zhang J, Wu S C et al. Application of in situ three-dimensional synchrotron radiation X-ray tomography for defects evaluation of metal additive manufactured components[J]. Nondestructive Testing, 42, 46-50(2020).

[14] Shi X, Han Z R, Jiang F W. Characterization of defects and fatigue behavior of Ti600 alloy rod synthesized by selective laser melting[J]. Chinese Journal of Vacuum Science and Technology, 40, 1162-1165(2020).

[15] Zhao X L, Li S J, Zhang M et al. Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting[J]. Materials & Design, 95, 21-31(2016).

[16] Maskery I, Aboulkhair N T, Corfield M R et al. Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography[J]. Materials Characterization, 111, 193-204(2016).

[17] Wu Z K, Wu S C, Zhang J et al. Defect induced fatigue behaviors of selective laser melted Ti-6Al-4V via synchrotron radiation X-ray tomography[J]. Acta Metallurgica Sinica, 55, 811-820(2019).

[18] Li Z L, Deng C L, Zhang G H. A predictive model of effective elastic modulus of concrete under influence of aggregate gradation[J]. Journal of Hydraulic Engineering, 47, 575-581(2016).

[19] Lu Z X, Xu Q, Wang B P et al. Numerical simulation of plain weave composites with defects under unidirectional tension[J]. Acta Materiae Compositae Sinica, 28, 200-207(2011).

[20] Gao Z, Cao P, Sun X J et al. DIGIMAT-based study on equivalent elastic modulus of concrete[J]. Water Resources and Hydropower Engineering, 49, 186-192(2018).

[21] Qi Z W, Hu D Y, Zhang L et al. Two-scale analysis for mechanical properties of 3D four-directional braided composites with pore defects[J]. Journal of Propulsion Technology, 39, 1873-1879(2018).

[22] Nayak B, Sahu R K. Experimental and Digimat-FE based representative volume element analysis of exceptional graphene flakes/aluminium alloy nanocomposite characteristics[J]. Materials Research Express, 6, 116593(2019).