[1] Liao C H, Zhou J, Shen H. Electrochemical corrosion behaviors before and after laser polishing of additive manufactured TC4 titanium alloy[J]. Chinese Journal of Lasers, 47, 0102003(2020).
[2] Ma R X, Xu G J, Liu Z Q et al. Effect of normalizing temperature on microstructures and tensile properties of laser three-dimensional-printed titanium alloy[J]. Chinese Journal of Lasers, 46, 0702008(2019).
[3] Xu Y L, Li T T, Cao X Y et al. Effect of excimer laser irradiation on the surface wettability of selective laser melted Ti6Al4V alloy[J]. Surface Technology, 49, 191-197(2020).
[4] Anand A, Das M, Kundu B et al. Plasma-sprayed Ti6Al4V alloy composite coatings reinforced with in situ formed TiB-TiN[J]. Journal of Thermal Spray Technology, 26, 2013-2019(2017).
[5] Gong Y Q, Fu G Y, Shi T et al. Local shielding gas model for laser cladding of titanium alloy in open environment[J]. Chinese Journal of Lasers, 47, 1102006(2020).
[6] Assadi H, Kreye H, Gärtner F et al. Cold spraying: a materials perspective[J]. Acta Materialia, 116, 382-407(2016).
[7] Li W Y, Yang K, Yin S et al. Solid-state additive manufacturing and repairing by cold spraying: a review[J]. Journal of Materials Science & Technology, 34, 440-457(2018).
[8] Yin S, Cavaliere P, Aldwell B et al. Cold spray additive manufacturing and repair: fundamentals and applications[J]. Additive Manufacturing, 21, 628-650(2018).
[9] Khun N W. Tan A W Y, Bi K J W, et al. Effects of working gas on wear and corrosion resistances of cold sprayed Ti-6Al-4V coatings[J]. Surface and Coatings Technology, 302, 1-12(2016).
[10] Luo X T, Wei Y K, Wang Y et al. Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in situ shot peening assisted cold spraying[J]. Materials & Design, 85, 527-533(2015).
[11] Chen C Y, Xie Y C, Yan X C et al. Effect of hot isostatic pressing (HIP) on microstructure and mechanical properties of Ti6Al4V alloy fabricated by cold spray additive manufacturing[J]. Additive Manufacturing, 27, 595-605(2019).
[12] Yao J H, Wu L J, Li B et al. Research states and development tendency of supersonic laser deposition technology[J]. Chinese Journal of Lasers, 46, 0300001(2019).
[13] Lupoi R, Cockburn A, Bryan C et al. Hardfacing steel with nanostructured coatings of Stellite-6 by supersonic laser deposition[J]. Light: Science & Applications, 1, e10(2012).
[14] Gorunov A I. Investigation microstructure and fracture behavior of welded stainless steel specimens previously obtained by supersonic laser deposition[J]. Journal of Manufacturing Processes, 56, 746-756(2020).
[15] Yao J H, Yang L J, Li B et al. Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray[J]. Applied Surface Science, 330, 300-308(2015).
[16] Li Z H, Yang L J, Li B et al. Microstructural characteristics of WC/Stellite 6 composite coating prepared by supersonic laser deposition[J]. Chinese Journal of Lasers, 42, 1106002(2015).
[17] Wu L J, Wang W L, Li B et al. Influence of diamond particle size and content on the microstructure and properties of diamond/Cu composite coating prepared by supersonic laser deposition[J]. Surface Technology, 48, 40-46(2019).
[18] Bray M, Cockburn A. O’Neill W. The Laser-assisted cold spray process and deposit characterisation[J]. Surface and Coatings Technology, 203, 2851-2857(2009).
[19] Li B, Wu L J, Zhang X et al. Microstructure and corrosion-resistant property of Ti6Al4V coating prepared by supersonic laser deposition[J]. China Surface Engineering, 31, 159-166(2018).
[20] Wang W L, Wu L J, Li B et al. Numerical simulation and experimental verification of interfacial bonding behavior of Ti-6Al-4V alloy via supersonic laser deposition[J]. Surface Technology, 49, 324-332(2020).
[21] Zhecheva A, Sha W, Malinov S et al. Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods[J]. Surface and Coatings Technology, 200, 2192-2207(2005).
