[3] C W JAMES, A S EDGAR. Progress in structural materials for aerospace systems.
[5] L LIU, S Z WANG, B Q ZHANG et al. Present status and prospects of nanostructured thermal barrier coatings and their performance improvement strategies: a review.
[7] Y LIU, H J SU, Z L SHEN et al. Effect of seed orientations on crystallographic texture control in faceted Al2O3/YAG eutectic ceramic during directional solidification.
[8] B H DUAN, L MAO, M R LV et al. Interface interaction during the preparation of TiAl-(Nb, V) quaternary intermetallic single crystals by directional solidification based on Y2O3 doped BaZrO3/Al2O3 composite ceramic mold.
[9] Y LIU, H J SU, Z L SHEN et al. High temperature calcium- magnesium-alumina-silicate (CMAS) corrosion behavior of directionally solidified Al2O3/YAG eutectic ceramic.
[10] H F SUN, L C SUN, X M REN et al. Outstanding molten calcium- magnesium-aluminosilicate (CMAS) corrosion resistance of directionally solidified Al2O3/Y3Al5O12 eutectic ceramic at 1500 °C.
[11] Y WAKU, N NAKAGAWA, T WAKAMOTO et al. A ductile ceramic eutectic composite with high strength at 1873 K.
[12] N NAKAGAWA, H OHTSUBO, A MITANI et al. High temperature strength and thermal stability for melt growth composite.
[13] M ARMSTRONG, H MEHRABI, N NAVEED. An overview of modern metal additive manufacturing technology.
[14] J K LIU, J Q HUANG, Y F ZHENG et al. Challenges in topology optimization for hybrid additive-subtractive manufacturing: a review.
[15] Y S KIM, W CHANG, H J JEONG et al. High performance of protonic ceramic fuel cells with 1-μm-thick electrolytes fabricated by inkjet printing.
[16] J G LI, X L AN, J J LIANG et al. Recent advances in the stereolithographic three-dimensional printing of ceramic cores: challenges and prospects.
[17] H ZHANG, Q ZHAI, Y CAO et al. Design and facile manufacturing of tri-layer laminated polyolefin microfibrous fabrics with tailoring pore size for enhancing waterproof breathable performance.
[18] S PFEIFFERP, K FLORIO, D PUCCIO et al. Direct laser additive manufacturing of high performance oxide ceramics: a state-of-the-art review.
[19] H LEE, C H J LIM, M J LOW et al. Lasers in additive manufacturing: a review.
[20] R GLARDON, N KARAPATIS, V ROMANO et al. Influence of Nd: YAG parameters on the selective laser sintering of metallic powders.
[21] J P KRUTH, X WANG, T LAOUI et al. Laser and materials in selective laser sintering.
[22] K M HU, K J LIN, D D GU et al. Mechanical properties and deformation behavior under compressive loading of selective laser melting processed bio-inspired sandwich structures.
[23] I SHISHKOVSKY, I YADROITSEV, P BERTRAND et al. Alumina-zirconium ceramics synthesis by selective laser sintering/ melting.
[24] Z L SHEN, H J SU, M H YU et al. Large-size complex-structure ternary eutectic ceramic fabricated using laser powder bed fusion assisted with finite element analysis.
[25] H F LIU, H J SU, Z L SHEN et al. Direct formation of Al2O3/ GdAlO3/ZrO2 ternary eutectic ceramics by selective laser melting: microstructure evolutions.
[26] D D GU, L DU, D H DAI et al. Influence of thermal behavior along deposition direction on microstructure and microhardness of laser melting deposited metallic parts.
[27] D D GU, X Y SHI, R POPRAWE et al. Material-structure- performance integrated laser-metal additive manufacturing.
[28] S KOKARE, J P OLIVEIRA, R GODINA. A LCA and LCC analysis of pure subtractive manufacturing, wire arc additive manufacturing, and selective laser melting approaches.
[29] H J SU, H F LIU, H JIANG et al. One-step preparation of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics with large size and irregular shape by directed energy deposition.
[30] D J WU, J SHI, F Y NIU et al. Direct additive manufacturing of melt growth Al2O3-ZrO2 functionally graded ceramics by laser directed energy deposition.
[31] H F LIU, H J SU, Z L SHEN et al. Preparation of large-size Al2O3/GdAlO3/ZrO2ternary eutectic ceramic rod by laser directed energy deposition and its microstructure homogenization mechanism.
[32] T DEBROY, L H WEI, J S ZUBACK et al. Additive manufacturing of metallic components—process, structure and properties.
[33] V K BALLA, S BOSE, A BANDYOPADHYAY. Processing of bulk alumina ceramics using laser engineered net shaping.
[34] Z Q FAN, Y T ZHAO, M Y LU et al. Yttria stabilized zirconia (YSZ) thin wall structures fabricated using laser engineered net shaping (LENS).
[35] Z Q FAN, Y T ZHAO, Q Y TAN et al. Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping.
[36] Z L SHEN, H J SU, H F LIU et al. Directly fabricated Al2O3/ GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: rapid solidification behavior and thermal field simulation.
[37] Z Q FAN, Y T ZHAO, Q Y TAN et al. New insights into the growth mechanism of 3D-printed Al2O3-Y3Al5O12 binary eutectic composites.
[38] J I PENA, R I MERINO, N R HARLAN et al. Microstructure of Y2O3 doped Al2O3-ZrO2 eutectics grown by the laser floating zone method.
[39] H J SU, J ZHANG, J C YU et al. Directional solidification and microstructural development of Al2O3/GdAlO3 eutectic ceramic in situ composite under rapid growth conditions.
[40] K SONG, J ZHANG, X LIN et al. Microstructure and mechanical properties of Al2O3/Y3Al5O12/ZrO2 hypereutectic directionally solidified ceramic prepared by laser floating zone.
[41] H J SU, J ZHANG, J J TIAN et al. Preparation and characterization of Al2O3/Y3Al5O12/ZrO2 ternary hypoeutectic in situ composites by laser rapid solidification.
[42] H F LIU, H J SU, Z L SHEN et al. One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition.
[43] Z Q FAN, Y YIN, Q Y TAN et al. Unveiling solidification mode transition and crystallographic characteristics in laser 3D-printed Al2O3-ZrO2 eutectic ceramics.
[44] X WANG, Y J ZHONG, Q SUN et al. Crystallography and interfacial structure in a directionally solidified Al2O3/Y3Al5O12/ ZrO2 eutectic crystal.
[45] A LARREA, G F FUENTE, R I MERINO et al. ZrO2-Al2O3 eutectic plates produced by laser zone melting.
[46] Y WAKU, N NAKAGAWA, T WAKAMOTO et al. High- temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite.
[47] Y F HUANG, D J WU, D K ZHAO et al. Process optimization of melt growth alumina/aluminum titanate composites directed energy deposition: effects of scanning speed.
[48] D K ZHAO, D J WU, F Y NIU et al. Heat treatment of melt- grown alumina ceramics with trace glass fabricated by laser directed energy deposition.
[49] D J WU, J D SAN, F Y NIU et al. Directed laser deposition of Al2O3-ZrO2 melt-grown composite ceramics with multiple composition ratios.
[50] Y B HU, H WANG, W L CONG et al. Directed energy deposition of zirconia-toughened alumina ceramic: novel microstructure formation and mechanical performance.
[51] D J WU, F Y NIU, Y F HUANG et al. Effects of TiO2 doping on microstructure and properties of directed laser deposition alumina/ aluminum titanate composites.
[52] D K ZHAO, D J WU, J SHI et al. Microstructure and mechanical properties of melt-grown alumina-mullite/glass composites fabricated by directed laser deposition.
[53] J M PAPPAS, X Y DONG. Effects of processing conditions on laser direct deposited alumina ceramics. ASME 2020 15th International Manufacturing Science and Engineering Conference, New York, 8260(2020).
[54] H F LIU, H J SU, Z L SHEN et al. Effect of scanning speed on the solidification process of Al2O3/GdAlO3/ZrO2 eutectic ceramics in a single track by selective laser melting.
[55] Z Q FAN, M Y LU, H HUANG. Selective laser melting of alumina: a single track study.
[56] D J WU, D K ZHAO, Y F HUANG et al. Shaping quality, microstructure, and mechanical properties of melt-grown mullite ceramics by directed laser deposition.
[57] S YAN, D J WU, F Y NIU et al. Al2O3-ZrO2 eutectic ceramic via ultrasonic-assisted laser engineered net shaping.
[58] S YAN, D J WU, F Y NIU et al. Effect of ultrasonic power on forming quality of nano-sized Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS).
[59] P MOHANTY, R MAHAPATRA, P PADHI et al. Ultrasonic cavitation: an approach to synthesize uniformly dispersed metal matrix nanocomposites—a review.
[60] D J WU, H C LIU, F LU et al. Al2O3-YAG eutectic ceramic prepared by laser additive manufacturing with water-cooled substrate.
[61] S YAN, D J WU, Y F HUANG et al. C fiber toughening Al2O3- ZrO2 eutectic via ultrasonic-assisted directed laser deposition.
[62] D J WU, F LU, D K ZHAO et al. Effect of doping SiC particles on cracks and pores of Al2O3-ZrO2 eutectic ceramics fabricated by directed laser deposition.
[63] S YAN, D J WU, G Y MA et al. Formation mechanism and process optimization of nano Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS).
[64] X T CHEN, W GUO, H M WANG et al. Highly transparent cubic γ-Al2O3 ceramic prepared by high-pressure sintering of home- made nanopowders.
[65] F Y NIU, D J WU, F LU et al. Microstructure and macro properties of Al2O3 ceramics prepared by laser engineered net shaping.
[66] X D LIU, Y C YUAN, R J WANG et al. Pressureless sintering behaviour of Al2O3/ZrO2 amorphous/solid solution powder with ultra-fine ZrO2 nanoparticle precipitation.
[67] J PASTOR, P POZA, J LLORCA et al. Mechanical properties of directionally solidified Al2O3-ZrO2(Y2O3) eutectics.
[68] J WILKES, Y C HAGEDORN, M WILHELM et al. Additive manufacturing of ZrO2-Al2O3ceramic components by selective laser melting.
[69] S H WANG, Z F CHU, J C LIU. Microstructure and mechanical properties of directionally solidified Al2O3/GdAlO3 eutectic ceramic prepared with horizontal high-frequency zone melting.
[70] Z L SHEN, H J SU, Y LIU et al. Laser additive manufacturing of melt-grown Al2O3/GdAlO3 eutectic ceramic composite: powder designs and crack analysis with thermo-mechanical simulation.
[71] E MEDVEDOVSKI. Alumina-mullite ceramics for structural applications.
[72] H J SU, J ZHANG, C J CUI et al. Rapid solidification behaviour of Al2O3/Y3Al5O12 (YAG) binary eutectic ceramic in situ composites.
[73] F Y NIU, D J WU, G Y MA et al. Rapid fabrication of eutectic ceramic structures by laser engineered net shaping.
[74] A HENNICHE, J OUYANG, Y MA et al. Microstructure, mechanical and thermo-physical properties of hot-pressed Al2O3- GdAlO3-ZrO2 ceramics with eutectic composition.
[75] L MAZEROLLES, N PIQUET, M TRICHET et al. New microstructures in ceramic materials from the melt for high temperature applications.
[76] H J SU, J ZHANG, J Z YU et al. Rapid solidification and fracture behavior of ternary metastable eutectic Al2O3/YAG/YSZ in situ composite ceramic.
