Ultra-Fast Laser Milling Technology for VITA MARK II Dental Glass Ceramics

Peixin Hu; Lu Yao; Qitao Lü; Encai Ji; Zilin Nie; Zhengdi He

doi:10.3788/LOP57.051402

[1] Wan Q B[M]. All-ceramic restorations, 2-5(2018).

[2] Zhang Y, Kelly J R. Dental ceramics for restoration and metal veneering[J]. Dental Clinics of North America, 61, 797-819(2017).

[3] Kelly J R, Nishimura I, Campbell S D. Ceramics in dentistry: historical roots and current perspectives[J]. The Journal of Prosthetic Dentistry, 75, 18-32(1996).

[4] Luo X P. 35(2): 851[J]. Zhao Y F. Research progress of dental all-porcelain crown restoration. Chinese Journal of Stomatology, 951, 61(2000).

[5] Gracis S, Thompson V, Ferencz J et al. A new classification system for all-ceramic and ceramic-like restorative materials[J]. The International Journal of Prosthodontics, 28, 227-235(2016).

[6] Ben-Hanan U, Judes H, Regev M. Comparative study of three different types of dental diamond burs[J]. Tribology-Materials, Surfaces & Interfaces, 2, 77-83(2008).

[7] Li R W K, Chow T W, Matinlinna J P. Ceramic dental biomaterials and CAD/CAM technology: state of the art[J]. Journal of Prosthodontic Research, 58, 208-216(2014).

[8] Boccaccini A R. Machinability and brittleness of glass-ceramics[J]. Journal of Materials Processing Technology, 65, 302-304(1997).

[9] Qin F, Zheng S C, Luo Z F et al. Evaluation of machinability and flexural strength of a novel dental machinable glass-ceramic[J]. Journal of Dentistry, 37, 776-780(2009).

[10] Niu W Y, Yu A B, Wu J Z et al. Influence of laser process parameters on taper and heat affected zone of glass ceramic hole[J]. Laser & Optoelectronics Progress, 54, 031601(2017).

[11] Hua X G, Wei X, Zhou M et al. Experimental study on mechanism of 355 nm ultraviolet laser polishing of Al2O3 ceramics[J]. Chinese Journal of Lasers, 41, 1203002(2014).

[12] Yang Q B, Xiao C G, Chen Z P et al. Surface wettability of laser-induced Al2O3 ceramic tools[J]. Laser & Optoelectronics Progress, 54, 101401(2017).

[13] Gamal A H L, Fornaini C, Rocca J P et al. The effect of CO2 and Nd∶YAP lasers on CAD/CAM Ceramics: SEM, EDS and thermal studies[J]. Laser Therapy, 25, 27-34(2016).

[14] Bärsch N, Baier K, Werelius K et al. Processing system for all-ceramic dental crowns using femtosecond laser machining. [C]//Proceedings of the Fourth International WLT-Conference on Lasers in Manufacturing, June 2007, Munich, Germany. [S.l.: s.n.](2007).

[15] Ohkuma K, Kameda T, Terada K. Five-axis laser milling system that realizes more accurate zirconia CAD/CAM crowns by direct milling from fully sintered blocks[J]. Dental Materials Journal, 38, 52-60(2019).

[16] Sonmez N, Gultekin P, Turp V et al. Evaluation of five CAD/CAM materials by microstructural characterization and mechanical tests: a comparative in vitro study[J]. BMC Oral Health, 18, 5(2018).

[17] Steen W M. Laser material processing[M]. London: Springer(2003).

[18] Perrie W, Rushton A, Gill M et al. Femtosecond laser micro-structuring of alumina ceramic[J]. Applied Surface Science, 248, 213-217(2005).

[19] Quinn G D. Hardness testing of ceramics[J]. Advanced Materials & Processes, 154, 23-27(1998).

[20] Sola D, Peña J. Study of the wavelength dependence in laser ablation of advanced ceramics and glass-ceramic materials in the nanosecond range[J]. Materials, 6, 5302-5313(2013).

[21] Wang X, Shephard J D, Dear F C et al. Optimized nanosecond pulsed laser micromachining of Y-TZP ceramics[J]. Journal of the American Ceramic Society, 91, 391-397(2008).

[22] Li J, Ji L F, Hu Y et al. Experimental study on milling of Y-TZP ceramic by 532 nm laser[J]. Chinese Journal of Lasers, 42, 0806002(2015).

[23] Kang S Y, Lee H N, Kim J H et al. Evaluation of marginal discrepancy of pressable ceramic veneer fabricated using CAD/CAM system: additive and subtractive manufacturing[J]. The Journal of Advanced Prosthodontics, 10, 347-353(2018).