Laser Surface Texturing Process and Its Mechanism for Brass Material

Yazhou Mao; Jianxi Yang; Wenjing Xu

doi:10.3788/CJL202148.1002111

[1] Zhao Y F, Yang J X, Mao Y Z et al. Effect of texture arrangement on friction and wear characteristics of sliding bearings[J]. Bearing, 33-37(2020).

[2] Suh M S, Chae Y H, Kim S S et al. Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction[J]. Tribology International, 43, 1508-1517(2010). http://www.sciencedirect.com/science/article/pii/S0301679X10000587

[3] Parreira J G, Gallo C A, Costa H L et al. New advances on maskless electrochemical texturing (MECT) for tribological purposes[J]. Surface and Coatings Technology, 212, 1-13(2012). http://www.sciencedirect.com/science/article/pii/S0257897212008183

[4] Xie J, Luo M J, Wu K K et al. Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool[J]. International Journal of Machine Tools and Manufacture, 73, 25-36(2013). http://www.sciencedirect.com/science/article/pii/S0890695513000862

[5] Walbrühl M, Linder D, Ågren J et al. Alternative Ni-based cemented carbide binder: hardness characterization by nano-indentation and focused ion beam[J]. International Journal of Refractory Metals and Hard Materials, 73, 204-209(2018). http://smartsearch.nstl.gov.cn/paper_detail.html?id=dec4448c593ad70358070f844e4fdcc9

[6] Mei X S, Yang Z X, Zhao W Q et al. Laser hole drilling on surface of electronic ceramic substrates[J]. Chinese Journal of Lasers, 47, 0500011(2020).

[7] Ye Y X, Liu Y F, Du T T et al. Experimental study on gradient wettable surface fabricated by laser rapid processing[J]. Chinese Journal of Lasers, 46, 1002001(2019).

[8] Zhao Y, Feng A X, Yang H H et al. Effects of laser texture process on infrared laser absorptivity of copper surface[J]. Surface Technology, 47, 57-64(2018).

[9] Qin Y, Förster D J, Weber R et al. Numerical study of the dynamics of the hole formation during drilling with combined ms and ns laser pulses[J]. Optics & Laser Technology, 112, 8-19(2019). http://www.sciencedirect.com/science/article/pii/S0030399218312404

[10] Qin Y, Förster D J, Weber R et al. Numerical analysis and semi-analytical prediction of the depth of holes drilled with combined ms and ns laser pulses[J]. Journal of Applied Physics, 127, 213101(2020). http://www.researchgate.net/publication/341810773_Numerical_analysis_and_semi-analytical_prediction_of_the_depth_of_holes_drilled_with_combined_ms_and_ns_laser_pulses

[11] Zhang Y M, Shen Z H, Ni X W et al. Modeling and simulation on long pulse laser drilling processing[J]. International Journal of Heat and Mass Transfer, 73, 429-437(2014). http://www.sciencedirect.com/science/article/pii/S0017931014001549

[12] Chen G Y, Zhu Z C, Yin J et al. Experiment on ablation threshold of single crystal diamond produced by femtosecond laser processing[J]. Chinese Journal of Lasers, 46, 0402001(2019).

[13] Spiro A, Lowe M, Pasmanik G et al. Drilling rate of five metals with picosecond laser pulses at 355, 532, and 1064 nm[J]. Applied Physics A, 107, 801-808(2012).

[14] Wang H, Zhao K, Shen H et al. Surface evolution in ultrafast laser ablation of fused silica[J]. Optics & Laser Technology, 131, 106420(2020).

[15] Mustafa H, Matthews D T A, Römer G R B E et al. Investigation of the ultrashort pulsed laser processing of zinc at 515 nm: morphology, crystallography and ablation threshold[J]. Materials & Design, 169, 107675(2019).

[16] Eberle G, Schmidt M, Pude F et al. Laser surface and subsurface modification of sapphire using femtosecond pulses[J]. Applied Surface Science, 378, 504-512(2016). http://www.sciencedirect.com/science/article/pii/S0169433216307735

[17] Nakajima Y, Nedyalkov N, Takami A et al. Fabrication of isolated platinum nanowire gratings and nanoparticles on silica substrate by femtosecond laser irradiation[J]. Applied Surface Science, 394, 108-114(2017).

[18] Yao Y S, Yuan Z Z, Wang Y Y et al. Research on ultrasonic-laser machining underwater and its mechanism for silicon nitride ceramics[J]. Journal of Mechanical Engineering, 53, 207-216(2017).

[19] Mao Y Z, Yang J X, Xu W J et al. Study on the influence of round pits arrangement patterns on tribological properties of journal bearings[J]. Industrial Lubrication and Tribology, 71, 931-941(2019). http://www.researchgate.net/publication/334885019_Study_on_the_influence_of_round_pits_arrangement_patterns_on_tribological_properties_of_journal_bearings

[20] Zhang Y, Yu G, He X L et al. Driving mechanism of keyhole evolution during multi-pulsedrilling with a millisecond laser[J]. Science China Physics, Mechanics & Astronomy, 62, 104711(2019).

[21] Wang L, Wang X S, Li N H et al. Processing of microstructures on 304L stainless steel surface based on long pulse laser[J]. Laser & Optoelectronics Progress, 54, 031402(2017).

[22] Bäuerle D. Laser processing and chemistry[M]. 3rd ed, 128-146(2011).

[23] von Allmen M. Laser drilling velocity in metals[J]. Journal of Applied Physics, 47, 5460-5463(1976). http://scitation.aip.org/content/aip/journal/jap/47/12/10.1063/1.322578

[24] Ping X E. Thermal stress and thermal fatigue[M]. Guo T W, Li A D, Transl, 23-30(1984).

[25] Zhao J J, Song C R, Liu J et al. Thermal and mechanical effect in optical material induced by repetitive pulse laser[J]. Acta Photonica Sinica, 35, 1856-1860(2006).