• Opto-Electronic Engineering
  • Vol. 44, Issue 7, 670 (2017)
Yuxuan Jia*, Qi Fan, and Yunfei Wang
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3969/j.issn.1003-501x.2017.07.002 Cite this Article
    Yuxuan Jia, Qi Fan, Yunfei Wang. Multi-focus lens based on metasurface holography[J]. Opto-Electronic Engineering, 2017, 44(7): 670 Copy Citation Text show less

    Abstract

    A broadband multi-focus lens based on metasurface holography in the far-infrared region is designed. By designing 8 C-shaped resonant rings, when linearly polarized light waves are incident normally to this set of resonators, cross-polarized component of transmitted light will form the phase shift from 0 to 2π, meanwhile the amplitude transmittance remains constant. Full-wave simulation was utilized to verify anomalous refraction properties when linearly polarized light waves irradiated this set of resonators vertically. The phase distribution of multi-focus lens was obtained by adopting the computer-generated hologram (CGH) method. According to ar-ranged resonant rings based on the calculated phase distribution, a squared multi-focus lens based on metasur-face was obtained. Simulation for the designed lens was conducted. Results show a good multi-focusing per-formance at the central frequency 28 THz in the focal length of 108 μm. Key
    Yuxuan Jia, Qi Fan, Yunfei Wang. Multi-focus lens based on metasurface holography[J]. Opto-Electronic Engineering, 2017, 44(7): 670
    Download Citation