[1] Soohoo S, Torchia M, Srivastava R, Cong M, Dimitrov L et al. IDC’s worldwide augmented reality and virtual reality spending guide taxonomy, 2020: release V2.https://www.idc.com/getdoc.jsp?containerId=US47062820.
[6] Lee JH, Cheng IC, Hua H, Wu ST. Introduction to Flat Panel Displays 2nd ed (John Wiley & Sons, Hoboken, 2020).
[12] Moverio BT-40 smart glasses with USB type-C connectivity.https://epson.com/For-Work/Wearables/Smart-Glasses/Moverio-BT-40-Smart-Glasses-with-USB-Type-C-Connectivity-/p/V11H969020.
[24] Laurila MM. Super inkjet Printed redistribution layer for a MEMS device (Tampere University of Technology, Tampere, 2015).
[26] Liu ZJ, Zhang K, Liu YB, Yan SW, Kwok HS et al. Fully multi-functional GaN-based micro-LEDs for 2500 PPI micro-displays, temperature sensing, light energy harvesting, and light detection. 2018 IEEE International Electron Devices Meeting (IEDM) 38.1. 1–38.1. 4 (IEEE, 2018);http://doi.org/10.1109/IEDM.2018.8614692.
[50] Murata K, Masuda K. Super inkjet printer technology and its properties. Convertech e-Print1, 108–111 (2011).
[76] Murata K, Sagisaka H, Shimizu K, Matsuba Y, Yokoyama H. Minimal manufacturing process by using a super fine inkjet system. In 2005 4th International Symposium on Environmentally Conscious Design and Inverse Manufacturing 588–589 (IEEE, 2005); http://doi.org/10.1109/ECODIM.2005.1619302.
[77] Shirakawa N, Kajihara K, Kashiwagi Y, Murata K. Fine-pitch copper wiring formed in a platingless process using ultra-fine inkjet and oxygen pump. In 2015 International Conference on Electronics Packaging and iMAPS All Asia Conference (ICEP-IAAC) 373–376 (IEEE, 2015);http://doi.org/10.1109/ICEP-IAAC.2015.7111038.
[80] Laurila MM, Soltani A, Mäntysalo M. Inkjet printed single layer high-density circuitry for a MEMS device. 2015 IEEE 65th Electronic Components and Technology Conference (ECTC) 968–972 (IEEE, 2015);http://doi.org/10.1109/ECTC.2015.7159712.
[81] Murata K. Direct fabrication of super -fine wiring and bumping by using inkjet process. Polytronic 2007–6th International Conference on Polymers and Adhesives in Microelectronics and Photonics 293–296 (IEEE, 2007);http://doi.org/10.1109/POLYTR.2007.4339186.
[82] Yang S, Zhen S, Shamim A. Fully inkjet Printed 85 GHz band pass filter on flexible substrate. 2018 48th European Microwave Conference (EuMC) 652–654 (IEEE, 2018);http://doi.org/10.23919/EuMC.2018.8541504.
[84] Khorramdel B, Laurila MM, Mäntysalo M. Metallization of high density TSVs using super inkjet technology. 2015 IEEE 65th Electronic Components and Technology Conference (ECTC) 41–45 (IEEE, 2015);http://doi.org/10.1109/ECTC.2015.7159569.
[99] Agarwala S, Goh GL, Yeong WY. Aerosol jet printed pH sensor based on carbon nanotubes for flexible electronics. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018) 88–94 (Nanyang Technological University, 2018);http://doi.org/10.25341/D4Q59F.
[119] Tai JY, Gan HY, Liang YN, Lok BK. Control of droplet formation in inkjet printing using Ohnesorge number category: materials and processes. 2008 10th Electronics Packaging Technology Conference 761–766 (IEEE, 2008);http://doi.org/10.1109/EPTC.2008.4763524.