• Infrared and Laser Engineering
  • Vol. 51, Issue 6, 20210503 (2022)
Peng Wang1、2, Jiaqi Liu1, Changku Sun1、2, and Baoshang Zhang2
Author Affiliations
  • 1State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China
  • 2Science and Technology on Electro-Optic Control Laboratory, Luoyang Institute of Electro-Optic Equipment, AVIC, Luoyang 471009, China
  • show less
    DOI: 10.3788/IRLA20210503 Cite this Article
    Peng Wang, Jiaqi Liu, Changku Sun, Baoshang Zhang. Correction of Gamma nonlinearity method by orthogonal fringe order subregional precoding[J]. Infrared and Laser Engineering, 2022, 51(6): 20210503 Copy Citation Text show less
    References

    [1] Chao Zuo, Xiaolei Zhang, Yan Hu. Has 3D finally come of age?——An introduction to 3D structured-light sensor. Infrared and Laser Engineering, 49, 0303001(2020).

    [2] Chao Zuo, Shijie Feng, Lei Huang, et al. Phase shifting algorithms for fringe projection profilometry: A review. Optics and Lasers in Engineering, 109, 25-59(2018).

    [3] Ping Zhou, Tongjing Zhu, Xinran Liu. Correction of phase error overcompensation and under-compensation in structured light measurement. Optics and Precision Engineering, 23, 56-62(2015).

    [4] Yang Zhao, Jia’an Fu, Haotian Yu. Defocus projection three-dimensional measurement based on deep learning accurate phase acquisition. Infrared and Laser Engineering, 49, 20200012(2020).

    [5] Song Zhang, Shing-Tung Yau. Generic nonsinusoidal phase error correction for three-dimensional shape measurement using a digital video projector.. Applied Optics, 46, 36-43(2007).

    [6] Zhongwei Li, Congjun Wang, Yusheng Shi. High precision phase error compensation algorithm for structural light measurement. Acta Optica Sinica, 28, 1527-1532(2008).

    [7] Kai Liu, Yongchang Wang, Daniel L Lau. Gamma model and its analysis for phase measuring profilometry. Journal of the Optical Society of America, 27, 553-562(2010).

    [8] Zewei Cai, Xiaoli Liu, Hao Jiang. Flexible phase error compensation based on Hilbert transform in phase shifting profilometry. Optics Express, 23, 25171-25181(2015).

    [9] Thang Hoang, Bing Pan, Dung Nguyen. Generic gamma correction for accuracy enhancement in fringe-projection profilometry. Optics Letters, 35, 1992-1994(2010).

    [10] Chao Liu, Shaoyan Gai, Feipeng Da. Sub-regional phase error compensation for structural light mearurement. Chinese Journal of Lasers, 45, 0604002(2018).

    [11] Guoqing Ma, Li Liu, Zhenglin Yu. Application and development of three-dimensional profile measurement for large and complex surface. Chinese Optics, 12, 214-228(2019).

    [12] Chao Zuo, Lei Huang, Minliang Zhang. Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review. Optics and Lasers in Engineering, 85, 84-103(2016).

    [13] Jingfa Lei, Zhiqiang Chen, Miao Zhang. Improvement of phase unwrapping method fordual-frequency projection fringe. Optics and Precision Engineering, 29, 1337-1345(2021).

    [14] Xu Zhang, Shuangyun Shao, Xiang Zhu. Measurement and calibration of the intensity transform function of the optical 3D profilometry system. Chinese Optics, 11, 123-130(2018).

    [15] Peng Wang, Yuqian Zhang, Changku Sun. Fringe projection measurement method based on polar line and fringe order double constraint. Infrared and Laser Engineering, 49, 0413001(2020).

    Peng Wang, Jiaqi Liu, Changku Sun, Baoshang Zhang. Correction of Gamma nonlinearity method by orthogonal fringe order subregional precoding[J]. Infrared and Laser Engineering, 2022, 51(6): 20210503
    Download Citation