Analysis of Coupled Surface Plasmon in LHM Mediated Dielectric Gap Multilayer Structure

Mohammed BENDJEBBOUR; Abdellatif CHERIFI; Benamar BOUHAFS

doi:10.1007/s13320-019-0568-3

[1] A. Verma, A. Prakash, and R. Tripathi, “Sensitivity enhancement of surface plasmon resonance biosensor using graphene and air gap,” Optics Communications, 2015, 357: 106–112.

[2] O. Saison-fransioso, G. Lévêque, A. Akjouj, Y. Pennec, B. Djafari-rouhani, S. Szunerits, et al., “Plasmonic nanoparticules arrays for high-sensitivity sensing: a theoretical investigation,” The Journal of Physical Chemistry C, 2012, 116(33): 17819–17827.

[3] M. S. Rahman, M. S. Anower, L. B. Bashar, and K. A. Rikta, “Sensitivity analysis of grapheme coated surface plasmon resonance biosensors for biosensing applications,” Sensing and Bio-sensing Research, 2017, 16: 41–45.

[4] A. K. Sharma, R. Jha, and B. D. Gupta, “Fiber-optic sensors based on surface plasmon resonance: a comprehensive review,” IEEE Sensors Journal, 2007, 7(8): 1118–1129.

[5] A. Shalabney, C. Khare, B. Rauschenbach, and I. Abdulhalim, “Sensitivity of surface plasmon resonance sensors based on metallic columnar thin films in the spectral and angular interrogations,” Sensors and Actuators B: Chemical, 2011, 159(1): 201–212.

[6] S. Szunerits, X. Castel, and R. Boukherroub, “Surface plasmon resonance investigation of silver and gold films coated with thin indium tin oxide layers: influence on stability and sensitivity,” The Journal of Physical Chemistry C, 2008, 112(40): 15813–15817.

[7] S. A. Taya and H. M. Kullab, “Optimization of transverse electric peak-type metal clad waveguide sensor using double-negative materials,” Applied Physics A, 2014, 116(4): 1841–1846.

[8] H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, E. J. Sanchez, et al., “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films, 2007, 515(17): 6953–6961.

[9] B. Bouhafs, M. Benatallah, and M. Bendjebbour, “Resonant electromagnetic field distribution on doped multilayer thin film structure,” Spectroscopy Letters, 2014, 47(5): 397–403.

[10] H. Deng, D. Yang, B. Chen, and C. Lin, “Simulation of surface plasmon resonance of Au-WO3-x and Ag-WO3-x nanocomposite films,” Sensors and Actuators B: Chemical, 2008, 134(2): 502–509.

[11] S. Szunerits, X. Castel, and R. Boukherroub, “Preparation of electrochemical and surface plasmon resonance active interfaces: deposition of indium tin oxide on silver thin films,” The Journal of Physical Chemistry C, 2008, 112(29): 10883–10888.

[12] Y. Yuan and Y. Dai, “A revised LRSPR sensor with sharp reflection spectrum,” Sensors, 2014, 14(9): 16664–16671.

[13] T. Vary and P. Markos, “Propagation of surface plasmon polaritons through gradient index and periodic structures,” Opto-Electronics Review, 2010, 18(4): 400–407.

[14] R. Slavik and J. Homola, “Simultaneous excitation of long and short range surface plasmons in an asymmetric structure,” Optics Communications, 2006, 259(2): 507–512.

[15] L. Shen and Z. Wang, “Guided modes in a four-layer slab waveguide with dispersive left-handed material,” Journal of Electromagnetic Analysis and Applications, 2010, 2(04): 264.

[16] C. Nylander, B. Liedberg, and T. Lind, “Gas detection by means of surface plasmon resonance,” Sensors and Actuators, 1982, 3: 79–88.

[17] K. Lin, Y. Lu, J. Chen, R. Zheng, P. Wang, and H. Ming, “Surface plasmon resonance hydrogen sensor based on metallic grating with high sensitivity,” Optics Express, 2008, 16(23): 18599–18604.

[18] J. W. Chung, S. D. Kim, R. Bernhardt, and J. C. Pyun, “Application of SPR biosensor for medical diagnostics of human hepatitis B virus (hHBV),” Sensors and Actuators B: Chemical, 2005, 111: 416–422.

[19] K. Wen, L. Yan, W. Pan, B. Luo, Z. Guo, Y. Guo, et al., “Design of plasmonic comb-like filters using loop-based resonators,” Plasmonics, 2013, 8(2): 1017–1022.

[20] A. Verma, A. Prakash, and R. Tripathi, “Sensitivity enhancement of surface plasmon resonance biosensor using graphene and air gap,” Optics Communications, 2015, 357: 106–112.

[21] S Pal, Y. K. Prajapati, J. P. Saini, and V. Singh, “Sensitivity enhancement of metamaterial- based surface plasmon resonance biosensor for near infrared,” Optica Applicata, 2016, 46(1): 131–143.

[22] A. Cherifi and B. Bouhafs, “Potential of SPR sensors based on multilayer interfaces with gold and LHM for biosensing applications,” Photonic Sensors, 2017, 7(3): 199–205.

[23] S. Hayashi, D. V. Nesterenko, A. Rahmouni, H. Ishitobi, Y. Inouye, S. Kawata, et al., “Light-tunable Fano resonance in metal-dielectric multilayer structures,” Scientific Reports, 2016, 6: 33144.

[24] Z. Sekkat, S. Hayashi, D. V. Nesterenko, A. Rahmouni, S. Refki, H. Ishitobi, et al., “Plasmonic coupled modes in metal-dielectric multilayer structures: Fano resonance and giant field enhancement,” Optics Express, 2016, 24(18): 20080–20088.

[25] Q. Ouyang, S. Zeng, X. Dinh, P. Coquet, and K. Yong, “Sensitivity enhancement of MoS2 nanosheet based surface plasmon resonance biosensor,” Procedia Engineering, 2016, 140: 134–139

[26] H. M. Kullab, S. A. Taya, and T. M. El-Agez, “Metal-clad waveguide sensor using a left-handed material as a core layer,” Journal of the Optical Society of America B, 2012, 29(5): 959–964.

[27] Q. Ouyang, S. Zeng, L. Jiang, L. Hong, G. Xu, X. Dinh, et al., “Sensitivity enhancement of transition metal dichalcogenides/silicon nanostructure-based surface plasmon resonance biosensor,” Scientific Reports, 2016, 6: 28190.

[28] A. K. Sharma, “Model of a plasmonic phase interrogation probe for optical sensing of hemoglobin in blood samples,” Sensing and Imaging, 2015, 16(1): 10.

[29] Q. Meng, X. Zhao, C. Lin, S. Chen, Y. Ding, and Z. Chen, “Figure of merit enhancement of a surface plasmon resonance sensor using a low-refractive-index porous silica film,” Sensors, 2017, 17(8): 1846.

[30] S. A. Taya, “Slab waveguide with air core layer and anisotropic left-handed material claddings as a sensor,” Opto-Electronics Review, 2014, 22(4): 252–257.

[31] A. D. Rakic′, A. B. Djurisic′, J. M. Elazar, and M. L. Majewski, “Optical properties of metallic films for vertical-cavity optoelectronic devices,” Applied Optics, 1998, 37(22): 5271–5283.

[32] S. M. Xiao, V. P. Drachev, A. V. Kildishev, X. J. Ni, U. K. Chettiar, H. K. Yuan, et al., “Loss-free and active optical negative-index metamaterials,” Nature, 2010, 466(7307): 735.

[33] S. Hayashi, D. V. Nesterenko, and Z. Sekkat, “Waveguide-coupled surface plasmon resonance sensor structures: Fano lineshape engineering for ultrahigh-resolution sensing,” Journal of Physics D: Applied Physics, 2015, 48(32): 325303.

[34] N. Goswami, A. Saha, and A. Ghosh, “Optical amplification with surface plasmon resonance and total internal reflection in gold nanostructure with BK7 parallel slab,” International Journal of Chemtech Research, 2014, 7(3): 1148–1153