Contents
2020
Volume: 10 Issue 2
11 Article(s)
Export citation format
Regular
Polydopamine-Assisted Fabrication of Stable Silver Nanoparticles on Optical Fiber for Enhanced Plasmonic Sensing
Yiwen TANG, Hui YUAN, Jiangping CHEN, Qiguo XING, Rongxin SU, Wei QI, and Zhimin HE
We present a facile and effective method for fabrication of the localized surface plasmon resonance (LSPR) optical fiber sensor assisted by two polydopamine (PDA) layers with enhanced plasmonic sensing performance. The first PDA layer was self-polymerized onto the bare optical fiber to provide the catechol groups for tWe present a facile and effective method for fabrication of the localized surface plasmon resonance (LSPR) optical fiber sensor assisted by two polydopamine (PDA) layers with enhanced plasmonic sensing performance. The first PDA layer was self-polymerized onto the bare optical fiber to provide the catechol groups for the reduction from Ag+ to Ago through chelating and redox activity. As the reduction of Ag+ proceeds, Ag nanoparticles (NPs) were grown in-situ on the PDA layer with uniform distribution. The second PDA layer was applied to prevent Ag NPs from oxidating and achieve an improvement of LSPR signal. The PDA/Ag/PDA-based optical fiber sensor has an enhanced LSPR sensitivity of 961 nm/RIU and excellent oxidation resistance. The stable PDA/Ag/PDA-based LSPR sensor with high optical performance is very promising for future application in optical sensing field..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 97 (2020)
Enhancement of Surface Plasmon Fiber Sensor Sensitivity Through the Grafting of Gold Nanoparticles
Elena MILIUTINA, Yevgeniya KALACHYOVA, Pavel POSTNIKOV, Vaclav ?VOR?íK, and Oleksiy LYUTAKOV
The optical fibers, coated with plasmonic active metal films, represent the simple and unpretentious sensors, potentially useful for measurements of physical or chemical quantities and wide range of analytical application. All fiber-based plasmonic sensors operate on the same physical principle based on changes in the The optical fibers, coated with plasmonic active metal films, represent the simple and unpretentious sensors, potentially useful for measurements of physical or chemical quantities and wide range of analytical application. All fiber-based plasmonic sensors operate on the same physical principle based on changes in the position of the plasmon absorption peak induced by a variation of surrounding medium refractive index. However, the observed spectral differences are often weak, and thus an enhancement of sensor sensitivity is strongly required. In this paper, we propose the immobilization of gold nanoparticles with sharp edges on the thin gold layer, deposited on the multimode fiber surface for improvement of the sensor functionality. The morphological and compositional changes in the gold covered fiber surface were determined by using the atomic force microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy methods. As a result of gold nanoparticles immobilization, the pronounced plasmon energy concentration near the fiber surface occurred, thus enhancing the response of the proposed hybrid plasmonic system to the variation of ambient refractive index. The position of plasmon absorption in the case of the created plasmonic structure was shown to be more sensitive to the changes in the surrounding medium in comparison with the standard sensors based on the bare gold layer..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 105 (2020)
Analysis of Coupled Surface Plasmon in LHM Mediated Dielectric Gap Multilayer Structure
Mohammed BENDJEBBOUR, Abdellatif CHERIFI, and Benamar BOUHAFS
The purpose of this work is to investigate theoretically the characteristics of confined electromagnetic modes propagating along the interfaces of a multilayer device. This one dimensional (1D) sensor is formed by stacking a left-handed material (LHM) layer between a SiO2-glass prism and a dielectric gap layer in contaThe purpose of this work is to investigate theoretically the characteristics of confined electromagnetic modes propagating along the interfaces of a multilayer device. This one dimensional (1D) sensor is formed by stacking a left-handed material (LHM) layer between a SiO2-glass prism and a dielectric gap layer in contact with gold (Au). The results indicate that the total thickness of the LHM layer and dielectric gap, in optimum conditions, give the ability of tuning significantly the characteristics of the resonant modes correlated to surface plasmons (SPs) propagation along the interfaces of the designed device. By considering two arrangements between LHM and Au, two opposite resonant behaviors observed in p-reflectance spectra are analyzed in the angular interrogation mode and discussed thoroughly..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 113 (2020)
All-Optical Humidity Sensor Using SnO2 Nanoparticle Drop Coated on Straight Channel Optical Waveguide
Nur Abdillah SIDDIQ, Wu Yi CHONG, Yono Hadi PRAMONO, Melania Suweni MUNTINI, Asnawi ASNAWI, and Harith AHMAD
The straight channel optical waveguide coated with the SnO2 nanoparticle is studied as an all-optical humidity sensor. The proposed sensor shows that the transmission loss of the waveguide increases with increasing relative humidity (RH) from 56% to 90% with very good repeatability. The sensitivity to changes in relatiThe straight channel optical waveguide coated with the SnO2 nanoparticle is studied as an all-optical humidity sensor. The proposed sensor shows that the transmission loss of the waveguide increases with increasing relative humidity (RH) from 56% to 90% with very good repeatability. The sensitivity to changes in relative humidity is ~2 dB/% RH. The response time of the humidity sensor is 2.5 s, and the recovery time is 3.5 s. The response to humidity can be divided into 3 different regions, which are correlated to the degree of water adsorption in the SnO2 nanoparticle layer. Compared with the previous all-optical humidity sensor based on SnO2, the proposed sensor exhibits more rapid response, simpler fabrication process, and higher sensitivity. The proposed sensor has a potential application in the long distance, remote agriculture, and biological humidity sensing..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 123 (2020)
A Numerical Approach to Design the Kretschmann Configuration Based Refractive Index Graphene-MoS2 Hybrid Layers With TiO2-SiO2 Nano for Formalin Detection
Md. Biplob HOSSAIN, Tamanna TASNIM, Lway F. ABDULRAZAK, Md. Masud RANA, and Md. Rabiul ISLAM
In this paper, a Kretschmann configuration based surface plasmon resonance (SPR) sensor is numerically designed using graphene-MoS2 hybrid structure TiO2-SiO2 nano particles for formalin detection. In this design, the observations of SPR angle versus minimum reflectance and SPR frequency (FSPR) versus maximum transmittIn this paper, a Kretschmann configuration based surface plasmon resonance (SPR) sensor is numerically designed using graphene-MoS2 hybrid structure TiO2-SiO2 nano particles for formalin detection. In this design, the observations of SPR angle versus minimum reflectance and SPR frequency (FSPR) versus maximum transmittance (Tmax) are considered. The chitosan is used as probe legend to perform reaction with the formalin (40% formaldehyde) which acts as target legend. In this paper, both graphene and MoS2 are used as biomolecular acknowledgment element (BAE) and TiO2 as well as SiO2 bilayers is used to improve the sensitivity of the sensor. The numerical results show that the variation of FSPR and SPR angles for inappropriate sensing of formalin is quite insignificant which confirms the absence of formalin. On the other hand, these variations for appropriate sensing are considerably significant that confirm the presence of formalin. At the end of this article, the variation of sensitivity of the proposed biosensor is measured in corresponding to the increment of a refractive index with a refractive index step 0.01 refractive index unit (RIU). In inclusion of TiO2-SiO2 bilayers with graphene-MoS2, a maximum sensitivity of 85.375% is numerically calculated..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 134 (2020)
Anodic Alumina Photonic Crystals as Refractive Index Sensors for Controlling the Composition of Liquid Mixtures
Matin ASHUROV, Vladimir GORELIK, Kirill NAPOLSKII, and Sergey KLIMONSKY
Photonic crystals based on anodic aluminum oxide films are examined as refractive index sensors for controlling the composition of water-alcohol liquid mixtures. The position of the reflectance maximum corresponding to the first photonic stop band is used as the analytical signal. Impregnation of a photonic crystal witPhotonic crystals based on anodic aluminum oxide films are examined as refractive index sensors for controlling the composition of water-alcohol liquid mixtures. The position of the reflectance maximum corresponding to the first photonic stop band is used as the analytical signal. Impregnation of a photonic crystal with water-ethanol and water-glycerol mixtures results in a redshift of the reflectance maximum. A fairly high refractive index sensitivity, sufficient to determine the composition of water-ethanol and water-glycerol mixtures with an accuracy of about 1 wt.%, is observed. The detailed dependencies of the analytical signal on the composition of mixtures are experimentally investigated and compared with numerical calculations. Prospects and limitations of the refractive index sensors based on anodic alumina photonic crystals are discussed..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 147 (2020)
Study of Utilization of Embedded Metal Nanoparticles in Dielectric Thin Film for Humidity Sensing
Hala J. EL-KHOZONDAR, and Waleed S. MOHAMMED
This paper presents a theoretical study of the utilization of the shift in the reflection peak of the thin dielectric film with embedded metal nanoparticles (NPs) towards humidity and vapor applications. The presence of the NPs in the film results in a complex effective index. Hence, the reflected light at the superstrThis paper presents a theoretical study of the utilization of the shift in the reflection peak of the thin dielectric film with embedded metal nanoparticles (NPs) towards humidity and vapor applications. The presence of the NPs in the film results in a complex effective index. Hence, the reflected light at the superstrate-film interface causes a phase shift when the index of the surrounding is changed. This alters the reflected spectrum of the formed Fabry-Perot, for both the reflection peak wavelength and intensity. Here, the dynamic range of the proposed sensor is optimized through the variation of the film thickness and nanoparticle metal type, as well as the volume fraction..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 155 (2020)
Enhanced Plasmonic-Induced Absorption Using a Cascade Scheme and Its Application as Refractive-Index Sensor
Xinyi LI, Daobin WANG, Shoupeng WANG, Lihua YUAN, Jingli LEI, and Xiaoxiao LI
In this paper, we describe a new method to improve fast-light transmission, which uses cascades. We design a simple plasmonic device that enables plasmonic-induced absorption (PIA). It consists mainly of two parallel rectangular cavities. The numerical results simulated by using the finite element method (FEM) confirm In this paper, we describe a new method to improve fast-light transmission, which uses cascades. We design a simple plasmonic device that enables plasmonic-induced absorption (PIA). It consists mainly of two parallel rectangular cavities. The numerical results simulated by using the finite element method (FEM) confirm its function. The corresponding group delay-time can reach –0.146 ps for the PIA window. Based on this result, we propose a cascade device, with the dual-rectangular cavity system as building block, to improve fast-light transmission even more. The results indicate that the cascade scheme can increase the group delay-time to –0.456 ps, which means the fast-light feature is substantially enhanced compared with the non-cascading approach. The effect of the distance between two cascade resonators and other structural parameters is also investigated. Finally, we use this design concept to build a refractive-index sensor with a sensitivity of 701 nm/RIU..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 162 (2020)
Simultaneous Curvature and Temperature Sensing Based on a Novel Mach-Zehnder Interferometer
Xiaoyan SUN, Haifeng DU, Xinran DONG, Youwang HU, and Ji’an DUAN
A novel fiber inline Mach-Zehnder interferometer (MZI) is proposed for simultaneous measurement of curvature and temperature. The sensor composes of single mode-multimode-dispersion compensation-multimode-single mode fiber (MMF-DCF-MMF) structure, using the direct fusion technology. The experimental results show curvatA novel fiber inline Mach-Zehnder interferometer (MZI) is proposed for simultaneous measurement of curvature and temperature. The sensor composes of single mode-multimode-dispersion compensation-multimode-single mode fiber (MMF-DCF-MMF) structure, using the direct fusion technology. The experimental results show curvature sensitivities of -12.82 nm/m-1 and -14.42 nm/m-1 in the range of 0 - 0.65 m-1 for two resonant dips, as well as temperature sensitivities of 57.6 pm/℃ and 74.3 pm/℃ within the range of 20 ℃ - 150 ℃. In addition, the sensor has unique advantages of easy fabrication, low cost, high fringe visibility of 24 dB, and high sensitivity, which shows a good application prospect in dual-parameters of sensing of curvature and temperature..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 171 (2020)
LD-Pumped Random Fiber Laser Based on Erbium-Ytterbium Co-Doped Fiber
Qingyang MENG, Han WU, Bing HAN, Jiaqi LI, and Zinan WANG
In this paper, a cladding-pumped erbium-ytterbium co-doped random fiber laser (EYRFL) operating at 1550 nm with high power laser diode (LD) is proposed and experimentally demonstrated for the first time. The laser cavity includes a 5-m-long erbium-ytterbium co-doped fiber that serves as the gain medium, as well as a 2-In this paper, a cladding-pumped erbium-ytterbium co-doped random fiber laser (EYRFL) operating at 1550 nm with high power laser diode (LD) is proposed and experimentally demonstrated for the first time. The laser cavity includes a 5-m-long erbium-ytterbium co-doped fiber that serves as the gain medium, as well as a 2-km-long single-mode fiber (SMF) to provide random distributed feedback. As a result, stable 2.14 W of 1550 nm random lasing at 9.80 W of 976 nm LD pump power and a linear output with the slope efficiency as 22.7 % are generated. This simple and novel random fiber laser could provide a promising way to develop high power 1.5 μm light sources..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 181 (2020)
Heart Rate Monitoring Sensor Based on Singlemode-Multimode-Singlemode Fiber
Ninik IRAWATI, Agus Muhamad HATTA, Yoseph Gita Yhun YHUWANA, and SEKARTEDJO
The singlemode-multimode-singlemode (SMS) fiber structure for a heart rate monitoring is proposed and developed. An artificial electrocardiogram (ECG) signal is used to simulate the heart pulse at different rates ranging from 50 beats per minute (bpm) to 200 bpm. The SMS fiber structure is placed at the center of a louThe singlemode-multimode-singlemode (SMS) fiber structure for a heart rate monitoring is proposed and developed. An artificial electrocardiogram (ECG) signal is used to simulate the heart pulse at different rates ranging from 50 beats per minute (bpm) to 200 bpm. The SMS fiber structure is placed at the center of a loudspeaker and it senses the vibration of the pulse. The vibration of the pulse signal applied to the SMS fiber structure changes the intensity of the optical output power. The proposed sensor shows a linear frequency of the heart rate sensing range that matches well with the relevant heart rate from the artificial ECG. This work shows the capability of the SMS fiber structure monitoring the heart rate frequencies for a long term, high stability realization, and reproducibility, and being suitable for the observation in hospitals as well as in other environments..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 10, Issue 2, 186 (2020)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20