[1] Feit M D, Exarhos G J, Rubenchik A M, et al. Influence of subsurface cracks on laser-induced surface damage[C]. SPIE, 2003, 5273: 264-272.
[2] Bertussi B, Cormont P, Palmier S, et al. Initiation of laser-induced damage sites in fused silica optical components[J]. Optics Express, 2009, 17(14): 11469-11479.
[3] Zhang Longxia, Zhu Xiaobing, Li Fengyu, et al. Laser-induced thermal damage influenced by surface defects of materials[J]. Acta Optica Sinica, 2016, 36(9): 0914001.
[4] Wang Hongxiang, Shen Lu, Li Chengfu, et al. Analysis and experimental investigation of laser induced damage of optics[J]. Chinese J Lasers, 2017, 44(3): 0302006.
[5] Wang Shitong, Yang Yongying, Zhao Limin, et al. Numerical simulation research on scattering light imaging of surface defects of optical components[J]. Chinese J Lasers, 2015, 42(7): 0708005.
[6] Luo Mao, Bu Yang, Xu Jinghao, et al. Optical element surface defect measurement based on multispectral technique[J]. Chinese J Lasers, 2017, 44(1): 0104001.
[7] Dai Zihua, Zhu Yongwei, Li Jun, et al. Comparison of different methods to measure the subsurface damage depth of K9 glass lapped by fixed abrasive polishing pad[J]. Diamond & Abrasives Engineering, 2014(5): 6-12.
[8] Hu Chenlin, Bi Guo, Ye Hui, et al. Research on detection of subsurface damage on grinding optical elements[J]. Journal of Synthetic Crystals, 2014, 43(11): 2929-2934.
[9] Xu Le, Guo Jian, Yu Bingjun, et al. Rapid detection on the thickness of subsurface damage layer of silicon[J]. Journal of Mechanical Engineering, 2016, 52(11): 108-114.
[10] Wang Z, Wang L, Yang J, et al. Detection of subsurface trace impurity in polished fused silica with biological method[J]. Optics Express, 2014, 22(18): 21292-21301.
[11] Kozlowski M R, Nichols M A. Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces[C]. SPIE, 1998, 3244: 356-364.
[12] Wang Zhuo, Wu Yulie, Dai Yifan, et al. Characterization of subsurface damage of optical materials in lapping process[J]. Nanotehcnology and Precision Engineer, 2008, 6(5): 349-355.
[13] Wang Zhuo, Wu Yulie, Dai Yifan, et al. Research on measurement and prediction methods of subsuface damage depth of optical materials in grinding process[J]. Aviation Precision Manufacturing Tehcnology, 2007, 43(5): 1-5.
[14] Zhang Y X, Kang R K, Guo D M, et al. Raman microspectroscopy study on the ground surface of monocrystalline silicon wafers[J]. Key Engineering Materials, 2006, 304/305: 241-245.
[15] Yang F, Fei P. Microindentation of ground silicon wafers[J]. Semiconductor Science & Technology, 2004, 19(9): 1165-1168.
[16] Yang F. Effect of subsurface damage on indentation behavior of ground ULETM glass[J]. Journal of Non-Crystalline Solids, 2005, 351(52/53/54): 3861-3865.
[17] Ma B, Shen Z, He P, et al. Evaluation and analysis of polished fused silica subsurface quality by the nanoindenter technique[J]. Applied Optics, 2011, 50(9): 279-285.
[18] Li Gailing, Wu Yulie, Wang Zhuo, et al. Experiment study on the destructive measurement of the depth of SSD for optical material[J]. Aviation Precision Manufacturing Tehcnology, 2006, 42(6): 19-22.
[19] Wang Jianbin, Zhu Yongwei, Wang Jiashun, et al. Effect of lapping methods on subsurface damage depth of single crystal sapphire[J]. Journal of Synthetic Crystals, 2014, 43(5): 1099-1104.
[20] Wu Yanpeng, Yang Wei, Ye Hui, et al. Study on subsurface damage depth and morphology of optical elements[J]. Manufacturing Technology & Machine Tool, 2013(10): 78-81.
[22] Esmaeilzare A, Rahimi A, Rezaei S M. Investigation of subsurface damages and surface roughness in grinding process of Zerodur glass-ceramic[J]. Applied Surface Science, 2014, 313(7): 67-75.
[23] Suratwala T, Wong L, Miller P, et al. Sub-surface mechanical damage distributions during grinding of fused silica[J]. Journal of Non-Crystalline Solids, 2006, 352(52/53/54): 5601-5617.
[24] Randi J A, Lambropoulos J C, Jacobs S D. Subsurface damage in some single crystalline optical materials[J]. Applied Optics, 2005, 44(12): 2241-2249.
[25] Zhou Y, Funkenbusch P D, Quesnel D J, et al. Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses[J]. Journal of the American Ceramic Society, 2010, 77(12): 3277-3280.
[26] Li S Y, Wang Z, Wu Y. Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processes[J]. Journal of Materials Processing Technology, 2008, 205(1/2/3): 34-41.
[27] Li Shengyi, Wang Zhuo, Wu Yulie, et al. Prediction theory and experiment of subsurface damage based on lapping processing parameters[J]. Journal of Mechanical Engineering, 2009, 45(2): 192-198.
[28] Zhang Yinxia, Yang Lele, Gao Wei, et al. Cross-sectional microscopy detection technology for subsurface damage of fixed abrasive lapped SiC wafers[J]. Journal of Synthetic Crystals, 2013, 42(5): 906-910.
[29] Xu H H K, Jahanmir S. Simple technique for observing subsurface damage in machining of ceramics[J]. Journal of the American Ceramic Society, 2005, 77(5): 1388-1390.
[30] Wang Hongxiang, Li Chengfu, Zhu Benwen, et al. Destructive methods for detecting subsurface defects of fused silica optics[J]. High Power Laser and Particle Beams, 2014, 26(12): 129-133.
[31] Helbawi H, Zhang L, Zarudi I, et al. Difference in subsurface damage in indented specimens with and without bonding layer[J]. International Journal of Mechanical Sciences, 2001, 43(4): 1107-1121.
[32] Lawn B R, Evans A G, Marshall D B. Elastic/plastic indentation damage in ceramics: The median/radial crack system[J]. Journal of the American Ceramic Society, 1980, 63(9/10): 574-581.
[33] Marshall D B, Lawn B R, Evans A G. Elastic/plastic indentation damage in ceramics: The lateral crack system[J]. Journal of the American Ceramic Society, 1982, 65(9/10): 561-566.
[34] Lambropoulos J C, Jacobs S D, Ruckman J. Material removal mechanisms from grinding to polishing[J]. Ceramic Transactions, 1999, 102: 113-128.
[35] Xiang Yong, Ren Jie, Bai Manshe, et al. Prediction method and measurement of the depth of subsurface damage of glass-ceramic by lapping process[J]. Chinese J Lasers, 2014, 41(7): 0708006.
[36] Buijs M, Martens L A A G. Effect ofindentation interaction on cracking[J]. Journal of the American Ceramic Society, 2005, 75(10): 2809-2814.
[37] Wang Z, Wu Y, Dai Y, et al. Subsurface damage distribution in the lapping process[J]. Applied Optics, 2008, 47(10): 1417-1426.
[38] Blaineau P, Laheurte R, Darnis P, et al. Relations between subsurface damage depth and surface roughness of grinded fused silica[J]. Optics Express, 2013, 21(25): 30433-30443.
[39] Wu Xiaoyan, Yu Yingjie, Lü Lijun. Review on non-destructive detection of inner defects of object[J]. Laser & Optoelectronics Progress, 2013, 50(4): 040002.
[40] Tian Xinli, Wang Jianquan, Dan Wei, et al. Progress on NDT technologies for micro-defects of engineering ceramics[J]. China Mechanical Engineering, 2010(21): 2639-2645.
[41] Liu Jian, Ma Zhanlong, Wang Junlin. Research status of subsurface damage detection technology of optical elements[J]. Laser & Optoelectronics Progress, 2011, 48(8): 081204.
[42] Wang J, Li Y, Han J, et al. Evaluating subsurface damage in optical glasses[J]. Journal of the European Optical Society-Rapid Publications, 2011, 6: 11001.
[43] Yuan Julong, Zhang Feihu, Dai Yifan, et al. Development research of science and technologies in ultra-precision machining field[J]. Journal of Mechanical Engineering, 2010, 46(15): 161-177.
[45] Fine K R. Non-destructive real-time direct measurement of subsurface damage[C]. SPIE, 2005, 5799: 105-110.
[46] Neauport J, Cormont P, Legros P, et al. Imaging subsurface damage of grinded fused silica optics by confocal fluorescence microscopy[J]. Optics Express, 2009, 17(5): 3543-3554.
[47] Williams W B, Mullany B A, Parker W C, et al. Using quantum dots to tag subsurface damage in lapped and polished glass samples[J]. Applied Optics, 2009, 48(27): 5155-5163.
[48] Williams W B, Mullany B A, Parker W C, et al. Using quantum dots to evaluate subsurface damage depths and formation mechanisms in glass[J]. CIRP Annals-Manufacturing Technology, 2010, 59(1): 569-572.
[49] Wang Jinghe, Zhang Lei, Wang Hongxiang, et al. Fused quartz subsurface damage detecting method based on confocal fluorescence microscopy[J]. Chinese J Lasers, 2015, 42(4): 0406004.
[50] Wang Wei, Zhang Lei, Feng Suya, et al. Using fluorescence microscopy method to study subsurface defects in Nd-doped phosphate laser glasses[J]. Chinese J Lasers, 2014, 41(9): 0906001.
[51] Trost M, Herffurth T, Schmitz D, et al. Evaluation of subsurface damage by light scattering techniques[J]. Applied Optics, 2013, 52(26): 6579-6588.
[52] Wu Z, Sheehan L, Kozlowski M. Laser modulated scattering as a nondestructive evaluation tool for defect inspection in optical materials for high power laser applications[J]. Optics Express, 1998, 3(10): 376-383.
[53] Wu Z, Feit M D, Kozlowski M R, et al. Laser modulated scattering as a nondestructive evaluation tool for optical surfaces and thin film coatings[C]. SPIE, 1999, 3578: 721-729.
[54] Ma B, Shen Z X, He P F, et al. Detection of subsurface defects of fused silica optics by confocal scattering microscopy[J]. Chinese Optics Letters, 2010, 8(3): 296-299.
[55] Tian Ailing, Wang Hui, Wang Chunhui. Simulation research on the light-scattering properties of the subfurface damage of optical components[J]. Chinese J Lasers, 2013, 40(9): 0908006.
[56] Tian Ailing, Tian Yujun, Wang Chunhui, et al. Scattering characteristics of focused light beam in medium with subsurface damage[J]. High Power Laser and Particles Beams, 2014, 26(9): 115-121.
[57] Temple P A. Total internal reflection microscopy: A surface inspection technique[J]. 1981, 20(15): 2656-2664.
[58] Sheehan L M, Kozlowski M R, Camp D W. Application of total internal reflection microscopy for laser damage studies on fused silica[C]. SPIE, 1998, 3244: 282-295.
[59] van der Bijl R J, Fhnle O W, Van B H, et al. In-process monitoring of grinding and polishing of optical surfaces[J]. Applied Optics, 2000, 39(19): 3300-3303.
[60] Fhnle O W, Wons T, Koch E, et al. iTIRM as a tool for qualifying polishing processes[J]. Applied Optics, 2002, 41(19): 4036-4038.
[61] Cui Hui, Liu Shijie, Zhao Yuanan, et al. Study on total internal reflection microscopy for subsuface damage[J]. Acta Optica Sinica, 2014, 34(6): 0612004.