ESCV cutting method during infrared crystal single point diamond turning process

Wang Peng; Xue Dongbai; Zhang Hao; Yang Kun; Li Weihao; Hui Changshun

doi:10.3788/irla201948.0742001

[1] Yang Liangliang. Measurement of diffraction efficiency for diffractive optical elements with oblique incidence[J]. Infrared and Laser Engineering, 2018, 47(1): 0117003. (in Chinese)

[2] Fu Qiang, Zhang Xin. Athermalization of the medium-wave infrared optical system based on chalcogenide glasses[J]. Infrared and Laser Engineering, 2015, 45(5): 1467-1471. (in Chinese)

[3] Cheng Zhifeng, Liu Fuhe, Xun Xianchao. Opto-mechanical design and analysis of dual-band sharing aperture imaging system[J]. Infrared and Laser Engineering, 2015, 44(11):3366-3372. (in Chinese)

[4] Lei Dajiang, Yue Xiaobing, Cui Hailong, et al. Measurement and evaluation of tool tip arc waviness of diamond tool[J]. Optics and Precision Engineering, 2017, 25(10): 2697-2705. (in Chinese)

[5] Wang Peng, Tu Xue, Hui Changshun. Improvement of the diamond turned surface texture by bonnet polishing process[J]. Acta Optica Sinica, 2015, 35(3): 0322001. (in Chinese)

[6] Tu Suet, Zhu Zhiwei, Wang Peng． Evolutionary diamond turning of optics for error correction covering a wide spatial spectrum[J]. Opt Eng, 2015, 54(1): 015103.

[7] Cui Dan, Li Shujuan. Review on ductile regime machining of hard and brittle materials[J]. Ordnance Material Science and Engineering, 2014, 37(1): 125-132. (in Chinese)

[8] Chen Qi, Fu Xiuhua, Jia Zonghe, et al. Research on processing technology of ZnS crystal [J]. Journal of Changchun University of Science and Technology, 2013, 36(3-4): 120-123. (in Chinese)

[9] Zhou Hongwei, Zhao Yongcheng, Deng Chunxia. Influence of the Anisotropy on Surface Roughness in Diamond Tuning of Optical Crystal Materials [J]. Journal of Changchun University of Science and Technology, 2004, 27(3): 44-46. (in Chinese)

[10] Li Weihao, Tong Yi, Lian Weiyan, et al． Experiment study on the cutting property of hot press Zinc Sulfide by single point diamond turning [C]//SPIE, 2014, 9281: 928116.

[11] Chen Junyun, Zhao Qingliang. Investigation of surface roughness in single point diamond turning [J]. Journal of Beijing University of Technology, 2012, 38(7): 1013-1019. (in Chinese)

[12] Cheung C F, Lee W B． A theoretical and experimental investigation of surface roughness formation in ultra-precision diamond turning[J]. International Journal of Machine Tools & Manufacture, 2000, 40: 979-1002.