Experimental study on propulsive performance of typical metal ablated by nanosecond pulse width laser

Mingyu Li; Jifei Ye; Chenghao Yu; Qinglin Yang; Hongjie Kong

doi:10.3788/IRLA20210277

[1] A C Marsil, Silva, C G Daduí, et al. A review of MEMS micropropulsion technologies for CubeSats and PocketQubes. Acta Astronautica, 143, 234-243(2018).

[2] I Levchenko, K Bazaka, Y J Ding, et al. Space micropropulsion systems for Cubesats and small satellites: From proximate targets to furthermost frontiers. Defense & Aerospace Week, 5, 1-36(2018).

[3] S Tan, J J Wu, Y Zhang, et al. Advances in laser-supported space micropropulsion. Journal of Propulsion Technology, 39, 2415-2428(2018).

[4] K Jonathan, A AndrA, I B Isak, et al. Micro-propulsion based on vacuum arcs. Defense & Aerospace Week, 125, 1-16(2019).

[5] R Ranjan, K Karthikeyan, F Riaz, et al. Cold gas propulsion microthruster for feed gas utilization in micro satellites. Applied Energy, 220, 921-933(2018).

[6] G R Hang, X Hong, X L Kang. Present situation and development trend of space propulsion technology abroad. Journal of Rocket Propulsion, 39, 7-15(2013).

[7] Y J Hong. Laser ablation micro-thruster for attitude and orbit control of microsatellite. Journal of Equipment Academy, 24, 57-61(2013).

[8] Z H Hua, N Guo, C L Mao, et al. Development situation of laser solid micro-thrust technique. Chemical Propellants & Polymeric Materials, 16, 13-18(2018).

[9] Pakhomov A V, Thompson S M, Gregy D A. Ablative laser propulsion: a study of specific impulse, thrust efficiency[C]AIP Conference Proceedings. 2003, 664: 194205.

[10] Z G Dou, H L Yao, J Wang, et al. Researchon the propulsive performance of laser propulsiv-e working medium. Journal of the Academy of Equipment Command & Technology, 99-103(2006).

[11] C R Phipps, M Birkan, W Bohn, et al. Review: Laser-ablation propulsion. Journal of Propulsion and Pouwer, 26, 609-637(2010).

[12] J Yasir, S Humaima, R Ahmad, et al. Measurement of ablative laser propulsion parameters for aluminum, Co–Ni ferrite and polyurethane polymer. Applied Physics A-Materials Science & Processing, 110(1)：207-210(2013).

[13] B D Du, B Y Xing, J F Ye, et al. Experiment investigation of propulsion performance of metals ablated by nanosecond laser. Infrared and Laser Engineering, 49, 20200086(2020).

[14] Y J Hong, W J Zhou, G Y Wang. Methods of micro thrust measurement and analysis of its key lssues. Acta Aeronautica et Astronautica Sinica, 34, 2287-2299(2013).

[15] Ye J F, Hong Y J, Li N L, et al. Laser ablation microthruster its perfmance test[C]Proceedings of the 38th Technical Exchange Conference the 2nd Joint Conference on Space Space Power of China Aerospace Third Professional Infmation wk, 2017: 3743. (in Chinese)

[16] W J Zhou, Y J Hong, J F Ye. Direct measurement method of specific impulse for pulse laser ablation micropropulsion. Journal of Propulsion Technology, 38, 1434-1440(2017).

[17] X Jin, W T Wu, W J Zhou, et al. Design method of micro-impulse measuring system based on pivots for pulsed micro-thruster. Infrared and Laser Engineering, 48, S117005(2019).

[18] J F Ye, Y J Hong, G Y Wang, et al. Measurement method for microgram amounts laser ablation mass. Journal of Propulsion Technology, 31, 372-376(2010).

[19] Sun C W, Lu Q S, Fan Z X, et al. Laser Irradiation Effect[M]. Beijing: National Defense Industry Press, 2002: 136141. (in Chinese)

[20] M Wen, N L Li, J Wu. Experimental study on impulse coupling characteristics of 532 nm/1 064 nm laser ablated Al target. Infrared and Laser Engineering, 46, S106005(2017).