• Infrared and Laser Engineering
  • Vol. 50, Issue S2, 20210277 (2021)
Mingyu Li, Jifei Ye*, Chenghao Yu, Qinglin Yang, and Hongjie Kong
Author Affiliations
  • State Key Laboratory of Laser Propulsion & Application, Department of Aerospace Science and Technology, Space Engineering University, Beijing 101416, China
  • show less
    DOI: 10.3788/IRLA20210277 Cite this Article
    Mingyu Li, Jifei Ye, Chenghao Yu, Qinglin Yang, Hongjie Kong. Experimental study on propulsive performance of typical metal ablated by nanosecond pulse width laser[J]. Infrared and Laser Engineering, 2021, 50(S2): 20210277 Copy Citation Text show less
    Schematic diagram of experimental equipment
    Fig. 1. Schematic diagram of experimental equipment
    Experiment scene diagram
    Fig. 2. Experiment scene diagram
    Relationship between monopulse ablation and laser power density
    Fig. 3. Relationship between monopulse ablation and laser power density
    Relationship between monopulse impulse and laser power density
    Fig. 4. Relationship between monopulse impulse and laser power density
    Relationship between impulse coupling coefficient and laser power density
    Fig. 5. Relationship between impulse coupling coefficient and laser power density
    Relationship between specific impulse and laser power density
    Fig. 6. Relationship between specific impulse and laser power density
    Scaling relation of impulse coupling coefficient of metal Au
    Fig. 7. Scaling relation of impulse coupling coefficient of metal Au
    Energy conversion efficiency under different laser power densities
    Fig. 8. Energy conversion efficiency under different laser power densities
    MetalMelting point/℃ Boiling point/℃ First ionization energy/ kJ·mol−1
    Fe1 5352 750762.5
    Al6602 500577.5
    Cu1 0832 580745.5
    Ni1 4532 732737.1
    Au1 0622 966890.1
    Ag9612 210731.0
    Y1 5223 338600.0
    Table 1. Melting boiling point and the first ionization energy of seven metal materials
    MetalFeAlCuNiAuAgY
    Resistivity9.72.71.76.82.41.659.6
    Table 2. Resistivity of seven metal materials (Unit: 10−8 Ω·m,20 ℃)
    MetalAlFeNiCuYAgAu
    $\overline {\Delta m} $0.71.60.51.30.20.70.4
    $\overline I $2.52.52.52.81.81.22.7
    Table 3. Average monopulse ablation mass (μg)and impulse (μN·s)
    Mingyu Li, Jifei Ye, Chenghao Yu, Qinglin Yang, Hongjie Kong. Experimental study on propulsive performance of typical metal ablated by nanosecond pulse width laser[J]. Infrared and Laser Engineering, 2021, 50(S2): 20210277
    Download Citation