Demonstration of a Polymer-Based Single Step Waveguide by 3D Printing Digital Light Processing Technology for Isopropanol Alcohol-Concentration Sensor

Kankan SWARGIARY; Romuald JOLIVOT; Waleed Soliman MOHAMME

doi:10.1007/s13320-021-0626-5

[1] C. Caucheteur, T. Guo, and J. Albert, “Review of plasmonic fiber optic biochemical sensors: Improving the limit of detection,” Analytical and Bioanalytical Chemistry, 2015, 407(14): 3883–3897.

[2] X. D. Wang and O. S. Wolfbeis, “Fiber-optic chemical sensors and biosensors,” Analytical Chemistry, 2016, 88(1): 203–227.

[3] P. J. Rivero, J. Goicoechea, and F. J. Arregui, “Optical fiber sensors based on polymeric sensitive coatings,” Polymers, 2018, 10(3): 280.

[4] D. Jandura, D. Pudis, and A. Kuzma, “Fabrication technology for PDMS ridge waveguide using DLW,” Optik – International Journal for Light and Electron Optics, 2016, 127(5): 2848–2851.

[5] H. Ma, A. K. Y. Jen, and L. R. Dalton, “Polymer-based optical waveguides: Materials, processing, and devices,” Advanced Materials, 2002, 14(19), 1339–1365.

[6] J. Nagata, S. Honma, M. Morisawa, and S. Muto, “Development of polymer optical waveguide-type alcohol sensor,” in Advanced Materials and Devices for Sensing and Imaging III, China, 2007, pp. 682920.

[7] Z. Zhao, X. Liu, X. Xing, Y. Lu, Y. Sun, X. Ou, et al., “The activation effects of low-level isopropyl alcohol exposure on arterial blood pressures are associated with decreased 5-Hydroxyindole acetic acid in urine,” PLoS One, 2016, 11(9): e0162762.

[8] M. E. Nwosu and M. R. Golomb, “Cerebral sinovenous thrombosis associated with isopropanol ingestion in an infant,” Journal of Child Neurology, 2009, 24(3): 349–353.

[9] V. Shukla, M. Bajpai, D. K. Singh, M. Singh, and R. Shukla, “Review of basic chemistry of UV-curing technology,” Pigment & Resin Technology, 2004, 33(5): 272–279.

[10] H. M. Lin, S. Y. Wu, F. C. Chang, and Y. C. Yen, “Photo-polymerization of photocurable resins containing polyhedral oligomeric silsesquioxane methacrylate,” Materials Chemistry and Physics, 2011, 131(1–2): 393–399.

[11] R. Bogue, “3D printing: The dawn of a new era in manufacturing,” Assembly Automation, 2013, 33(4): 307–311.

[12] M. Morisawa, Y. Amemiya, H. Kohzu, C. X. Liang, and S. Muto, “Plastic optical fibre sensor for detecting vapour phase alcohol,” Measurement Science and Technology, 2001, 12(7): 877–881.

[13] S. Muto, K. Uchiyama, G. Vishnoi, M. Morisawa, C. Xin Liang, H. Machida, et al., “Plastic optical fiber sensors for detecting leakage of alkane gases and gasoline vapors,” in Photopolymer Device Physics, Chemistry and Applications IV, Canada, 1998, pp. 3417.

[14] K. Swargiary, P. Jarutatsanangkoon, P. Suwanich, R. Jolivot, and W. S. Mohammed, “Single-step 3D-printed integrated optical system and its implementation for a sensing application using digital light processing technology,” Applied Optics, 2020, 59(1): 122–128.

[15] J. Lovo, I. L. de Camargo, C. A. Fortulan, and L. Olmos, “3D DLP additive manufacturing: Printer and validation,” in 24th ABCM International Congress of Mechanical Engineering, Brasil, 2017, pp. 2761.

[16] Isopropyl Alcohol, The National Institute for Occupational Safety and Health (NIOSH), Centers for Disease Control and Prevention, accessed online on July 27, 2020, https://www.cdc.gov/niosh/ pel88/67-63.html.