Research Progress of Laser Application in Material Removal

Xiaodong Hu; Yuanlong Li; Shaozhuang Bai; Ke Ma

doi:10.3788/LOP202158.0500008

[1] Wei C, Ma Y P, Han Y et al. Femtosecond laser processing of ultrahard materials‍. Laser & Optoelectronics Progress, 56, 190003(2019).

[2] Xia B, Jiang L, Wang S M et al. Femtosecond laser drilling of micro-holes. Chinese Journal of Lasers, 40, 0201001(2013).

[3] Wang Q Q. Numerical simulation and experimental study of laser drilling on SUS304 stainless steel, 1-2(2018).

[4] Chen Z. Laser precision process technology and it's applications. New Technology & New Process, 27-29(2002).

[5] Zuo T C, Chen H, Zhang D Y et al. Application of laser manufacturing technology in aviation industry. Aeronautical Manufacturing Technology, 51, 32-34(2008).

[6] Thawari G, Sundar J K S, Sundararajan G et al. Influence of process parameters during pulsed Nd∶YAG laser cutting of nickel-base superalloys. Journal of Materials Processing Technology, 170, 229-239(2005).

[7] Singh P, Pramanik A, Basak A K et al. Developments of non-conventional drilling methods—a review. The International Journal of Advanced Manufacturing Technology, 106, 2133-2166(2020).

[8] Salonitis K, Stournaras A, Stavropoulos P et al. Thermal modeling of the material removal rate and surface roughness for die-sinking EDM. The International Journal of Advanced Manufacturing Technology, 40, 316-323(2009).

[9] Zang Y N, Ni X W, Chen Y B. Simulation of long pulsed laser drilling on metal based on birth and death method of ANSYS. Chinese Journal of Lasers, 40, 0603005(2013).

[10] Marimuthu S, Antar M, Dunleavey J et al. An experimental study on quasi-CW fibre laser drilling of nickel superalloy. Optics & Laser Technology, 94, 119-127(2017).

[11] Zhang H. Study of laser cutting process for aluminum alloy plate, 13-14(2016).

[12] Wang H J, Li Y L, Li P. Orthogonal experiment on laser cutting of AZ31B magnesium aluminum alloys. Laser & Optoelectronics Progress, 55, 101405(2018).

[13] Xia Z Q, Xiao H M. Research status and process advantages of high precision new cutting technologies. Journal of Wuhan Institute of Technology, 35, 63-67(2013).

[14] Jiang H H. Development and forecast of the laser processing technology application. Optoelectronic Technology & Information, 1-12(2001).

[15] Chen T. Optimization research of quality control and parameters of laser cutting, 3-5(2014).

[16] Marimuthu S, Dunleavey J, Liu Y et al. Laser cutting of aluminium-alumina metal matrix composite. Optics & Laser Technology, 117, 251-259(2019).

[17] Liu H Q. Design of three-dimensional laser cutting system for KUKA robot based on PROFINET. Mechanical & Electrical Engineering Technology, 48, 43-46(2019).

[18] Chaki S, Bathe R N, Ghosal S et al. Multi-objective optimisation of pulsed Nd∶YAG laser cutting process using integrated ANN-NSGAII model. Journal of Intelligent Manufacturing, 29, 175-190(2018).

[19] Yu D Y, Wang X Y. Temperature field simulation of single-layer carbon fiber reinforced plastics in multi-directional laser cutting. Laser & Optoelectronics Progress, 54, 111409(2017).

[20] Zhang W, Li G Z, Wang C M et al. Process optimization and design of fiber laser cutting aluminium-lithium alloy. Chinese Journal of Lasers, 42, 0203003(2015).

[21] Herzog D, Schmidt-Lehr M, Oberlander M et al. Laser cutting of carbon fibre reinforced plastics of high thickness. Materials & Design, 92, 742-749(2016).

[22] Shen Y P, Chen C, Gao M et al. Technological characteristics in fiber laser cutting of medium-thickness aluminum alloy sheet. Chinese Journal of Lasers, 46, 0102008(2019).

[23] Janković P, Madić M, Radovanović M et al. Optimization of surface roughness from different aspects in high-power CO2 laser cutting of AA5754 aluminum alloy. Arabian Journal for Science and Engineering, 44, 10245-10256(2019).

[24] Dijkkamp D, Venkatesan T et al. Preparation of Y-Ba-Cu oxide superconductor thin-films using pulsed laser evaporation from high Tc bulk material. Applied Physics Letters, 51, 619-621(1987).

[25] Zhu X N, Bao W X. Fundamentals of ultrashort pulse laser and its applications. Chinese Journal of Lasers, 46, 1200001(2019).

[26] Sun K, Yang H, Xue W et al. Anti-biofouling superhydrophobic surface fabricated by picosecond laser texturing of stainless steel. Applied Surface Science, 436, 263-267(2018).

[27] Qiao L L, Chu W, Wang Z et al. Three-dimensional microfabrication by shaped femtosecond laser pulses. Acta Optica Sinica, 39, 0126012(2019).

[28] Chichkov B N, Momma C, Nolte S et al. Femtosecond， picosecond and nanosecond laser ablation of solids. Applied Physics A, 63, 109-115(1996).

[29] Pfeifenberger M J, Mangang M, Wurster S et al. The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation. Materials & Design, 121, 109-118(2017).

[30] Zhang K, Chen Z M, Geng Y Y et al. Nanoscale-resolved patterning on metal hydrazone complex thin films using diode-based maskless laser writing in the visible light regime. Chinese Optics Letters, 14, 051401-051405(2016).

[31] Durisova J, Pudis D, Goraus M et al. IP-Dip photoresist surfaces for photonic applications prepared by laser lithography and studied by AFM. Applied Surface Science, 461, 108-112(2018).

[32] Zhang W L, Lei Y J, Ming F W et al. Lignin laser lithography： a direct-write method for fabricating 3D graphene electrodes for microsupercapacitors. Advanced Energy Materials, 8, 1801840(2018).

[33] Lu Y, Sun G F, Wen D P et al. Effects of applying electric and magnetic fields on laser drilling. The International Journal of Advanced Manufacturing Technology, 84, 2293-2300(2016).

[34] Wang H X, Zhu S K, Xu G X et al. Influence of ultrasonic vibration on percussion drilling performance for millisecond pulsed Nd∶YAG laser. Optics & Laser Technology, 104, 133-139(2018).

[35] Wang L, Huang C Z, Wang J et al. An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics. Ceramics International, 44, 5636-5645(2018).

[36] Bai S Z. Study of laser cutting groove forming under an electro-magnetic composite field, 13-18(2020).