• Spectroscopy and Spectral Analysis
  • Vol. 41, Issue 7, 2314 (2021)
Xiu LI, Jie PAN, Min HUANG*;, Yong-hui XI, and Zi-han LIU
Author Affiliations
  • School of Printing and Packaging Engineering, Beijing Institute of Graphic Communication, Beijing 102600, China
  • show less
    DOI: 10.3964/j.issn.1000-0593(2021)07-2314-07 Cite this Article
    Xiu LI, Jie PAN, Min HUANG, Yong-hui XI, Zi-han LIU. Influence of Assembly Conditions on Spectral Properties of SiO2 Structural Color Coatings Prepared by Rapid Coating Method[J]. Spectroscopy and Spectral Analysis, 2021, 41(7): 2314 Copy Citation Text show less
    Appearance of the structural color films with different diameters
    Fig. 1. Appearance of the structural color films with different diameters
    Appearance of structural color films with different microsphere concentrations
    Fig. 2. Appearance of structural color films with different microsphere concentrations
    Appearance of structural color films with different coating times
    Fig. 3. Appearance of structural color films with different coating times
    Geometric light path diagram of X-Rite MA68Ⅱ
    Fig. 4. Geometric light path diagram of X-Rite MA68Ⅱ
    Reflectance spectra of structured color films(a): 200 nm; (b): 220 nm; (c): 250 nm; (d): 280 nm
    Fig. 5. Reflectance spectra of structured color films
    (a): 200 nm; (b): 220 nm; (c): 250 nm; (d): 280 nm
    Reflectance spectra of structured color films with different diameters and different concentrations(a): 200 nm 4%; (b): 200 nm 8%; (c): 200 nm 10%; (d): 220 nm 4%; (e): 220 nm 8%;(f): 220 nm 10%; (g): 250 nm 4%; (h): 250 nm 8%; (i): 250 nm 10%
    Fig. 6. Reflectance spectra of structured color films with different diameters and different concentrations
    (a): 200 nm 4%; (b): 200 nm 8%; (c): 200 nm 10%; (d): 220 nm 4%; (e): 220 nm 8%;(f): 220 nm 10%; (g): 250 nm 4%; (h): 250 nm 8%; (i): 250 nm 10%
    Photographs after 200 times magnification
    Fig. 7. Photographs after 200 times magnification
    Reflectance spectra of structured color films with cover once, twice and three times
    Fig. 8. Reflectance spectra of structured color films with cover once, twice and three times
    Diameter
    /nm
    Incident angles
    15°30°45°60°
    200463.0455.3433.3401.3366.6
    220509.3500.8476.6441.5403.3
    250578.8569.1541.6501.7458.3
    280648.2637.4606.6561.9513.2
    300694.6682.9649.9602.0549.9
    Table 1. Theoretical value of center wavelength with different diameters and different incident angles
    Diameter
    /nm
    Receiving angles
    15°25°45°75°110°
    200430440450460460
    220490490500530530
    250550550550590590
    280600600620650650
    Table 2. Peak wavelength of structured color films with different diameters at different receiving angles
    15°L*a*b*hab*Cab*
    200 nm33.650.35-15.39271.3015.39
    220 nm50.00-17.460.11179.6417.46
    250 nm44.66-8.0929.31105.4330.41
    280 nm49.467.715.4035.019.41
    Table 3. The CIE L*a*b* of the sample surface measured at 15° receiving angle
    Xiu LI, Jie PAN, Min HUANG, Yong-hui XI, Zi-han LIU. Influence of Assembly Conditions on Spectral Properties of SiO2 Structural Color Coatings Prepared by Rapid Coating Method[J]. Spectroscopy and Spectral Analysis, 2021, 41(7): 2314
    Download Citation