[1] Fang Qinlin. Research on roundness evaluation algorithm and programming[D]. Wuhan: Huazhong University of Science and Technology, 2007. (in Chinese)
[2] Endrias D H, Feng H Y. Mininum-zone form tolerance evaluation using rigid-body coordinate transformation[J]. Journal of Computing and Information Science in Engineering, 2003, 3(1): 31-38.
[5] Li Jiean, Tan Jiubin, Cui Jiwen. Study on method of feedback compensation drift of collimation beam based on filter[J]. Journal of Optoeletronics Laser, 2013, 4(2): 336-342. (in Chinese)
[7] Wang Xijun. Computation and comparison of laser speckle with sub-pixel measurement methods[J]. Chinese Optics, 2012, 5(6): 652-657. (in Chinese)
[8] Liu Jie, Li Hua, Chang Hemin, et al. System contributing to install inside sleeve anf filtering algorithm to evaluate its roundness error[J]. Chinese Journal of Lasers, 2014, 41(6): 626-630. (in Chinese)
[9] Zhang Chunyang, Lei Xianqing, Li Jishun, et al. Method of roundness error evaluation based on geometry optimization [J]. Journal of Mechanical Engineering, 2010, 46(12): 8-11. (in Chinese)
[10] Lei Xianqing, Chang Weihang, Xue Yujun, et al. Evaluation of roundness error based on mesh searching arithmetic[J]. Chinese Journal of Scientific Instrument, 2008, 29(11): 2324-2329. (in Chinese)
[11] Huang Fugui, Zheng Yujun. A method for roundness error evaluation based on area hunting[J]. Acta Metrological Sinica, 2008, 29(2): 117-119. (in Chinese)
[12] Liu Shugui, Yang Fang, Tao Jin. Valuation of minimum circumscribed circle form error by computational geometry approach[J]. Journal of Engineering Graphics, 2000, 3: 83-89. (in Chinese)
[13] Yue Wuling, Wu Yong. Roundness error based on quasi-incremental algorithm[J]. Chinese Journal of Mechanical Engineering, 2008, 44(1): 87-91. (in Chinese)