Numerical simulation of warping deformation on metal composite plate during laser bending

Li Zihui; Wang Xuyue

doi:10.3788/irla201847.0506004

[1] Chen Zhenye. Production practice of hot rolled single sided stain-less steel clad plate[J]. Hot Working Technology, 2016(15): 160-163. (in Chinese)

[2] He Minbo, Ma Zhiliang, Wei Chenghua, et al. Influence of pyrolysis on the laser ablation of carbon-fiber/ epoxy composite[J]. Infrared and Laser Engineering, 2016, 45(3):0306001. (in Chinese)

[3] Song Youbao, Li Long, Zhou Dejing. Research status and prospect of welding of laminated metal composite plate[J]. Welding, 2016(10): 18-22. (in Chinese)

[4] Li Rui, Yang Xiaojun, Zhao Wei, et al. Effect of femtosecond laser micromachining on the roughness of cladding sidewalls[J]. Infrared and Laser Engineering, 2015, 44(11): 3244-3249. (in Chinese)

[5] Wu Dongjiang, Zhang Qiang, Guo Dongming. Experiment on bending of Al2O3 ceramic slice with CO2 CW-laser[J]. Optics and Precision Engineering, 2009, 17(10): 2473-2479. (in Chinese)

[6] Zhang Pan, Wang Xuyue. Element diffusion and material properties in transition layer of bending zone in laminated plates[J]. Chinese J Lasers, 2016, 43(7): 0702001. (in Chinese)

[7] Jha G C, Nath A K, Roy S K. Study of edge effect and multi-curvature in laser bending of AISI 304 stainless steel[J]. Journal of Materials Processing Technology, 2008, 197(1): 434-438.

[8] Wei Yujun. Research on the laser induced thermoforming of lightweight aluminum alloy plate[D]. Harbin: Harbin Institute of Technology, 2015. (in Chinese)

[9] Zahrani E G, Marasi A, Zahrani E G, et al. Experimental investigation of edge effect and longitudinal distortion in laser bending process[J]. Optics & Laser Technology, 2013, 45(1): 301-307.

[10] Pei Jibin. Research on the mechanism and deformation behavior of laser bending of shipbuilding steel plate[D]. Dalian: Dalian University of Technology, 2008. (in Chinese)

[11] Shen H, Hu J, Yao Z. Analysis and control of edge effects in laser bending[J]. Optics & Lasers in Engineering, 2010, 48(3): 305-315.

[12] Dang Dongxian. The reducing methods research of unexpected deformations in laser bending[D]. Shanghai: Shanghai Jiao Tong University, 2012. (in Chinese)

[13] Shi Yongjun, Zhang Chen, Sun Guidong, et al. Study on reducing edge effects by using assistant force in laser forming[J]. Journal of Materials Processing Technology, 2016, 227: 169-177.

[14] Chi Shanshan, Wang Xuyue, Xu Wenji. Numerical simulation on stainless steel-carbon steel laminated sheet considering interface during pulsed laser bending[J]. Chinese J Lasers, 2014, 41(11): 1103002. (in Chinese)