White Light Interferometry Stitching Measurement of Gull-Wing Aspheric Optics

Wenwen Lu; Jingyang Guo; Shanyong Chen

doi:10.3788/AOS202242.0912001

[1] Zhou Z X, Zhou Q Y, Ren Y H. Current research and development trends of complex surface machining technology[J]. Journal of Mechanical Engineering, 46, 105-113(2010).

[2] Wang D Y, Xue C X, Li C et al. Design of electronic endoscope optical system based on microlens array[J]. Acta Optica Sinica, 38, 0222003(2018).

[3] Wang Q F, Cheng D W, Wang Y T et al. Design, tolerance, and fabrication of an optical see-through head-mounted display with free-form surface elements[J]. Applied Optics, 52, C88-C99(2013).

[4] Li J J, Chu C Y, Lu W T et al. Development of microlens arrays: from fabrication to photonic applications[J]. Acta Optica Sinica, 41, 2100001(2021).

[5] Gong F, Li K S, Yan C. Progress on precision glass molding[J]. Optics and Precision Engineering, 26, 1380-1391(2018).

[6] Shi Z L, Zhang L, Hou J J et al. Review of rapid heat cycle molding technology[J]. Journal of Netshape Forming Engineering, 9, 1-18(2017).

[7] Ma T, Yu J C, Wang Q H. Precision glass molding process of small aperture thin lens[J]. Infrared and Laser Engineering, 40, 87-90(2011).

[8] Shu C S, Dong H, Yin S H et al. Research progress of high precision micro structure glass optical element array molding technology[J]. Optics and Precision Engineering, 28, 1967-1985(2020).

[9] Liu X G, Huo F R, Xue C X. Parameter optimization and error compensation of diffraction microlens injection molding process[J]. Laser & Optoelectronics Progress, 57, 052204(2020).

[10] MacGovern A J, Wyant J C. Computer generated holograms for testing optical elements[J]. Applied Optics, 10, 619-624(1971).

[11] Garbusi E, Osten W. Analytical of disturbing diffraction orders in in-line computer generated holograms for aspheric testing[J]. Optics Communications, 283, 2651-2656(2010).

[12] Bergmans R H, Nieuwenkamp H J, Kok G P et al. Comparison of asphere measurements by tactile and optical metrological instruments[J]. Measurement Science and Technology, 26, 105004(2015).

[13] Widdershoven I, Donker R L, Spaan H M. Realization and calibration of the “Isara 400” ultra-precision CMM[J]. Journal of Physics: Conference Series, 311, 012002(2011).

[14] Guo T, Hu C G, Chen J P et al. Vertical scanning white-light interferometry for dimensional characterization of microelectromechanical system devices[J]. Acta Optica Sinica, 27, 668-672(2007).

[15] Zhao W C, Fan B, Wu F et al. Testing of aspheric surface normal vector based on phase measuring deflectometry[J]. Acta Optica Sinica, 31, 0612007(2011).

[16] Wang M C, Liao G L, Shi T L. Research on the measurement of small optical element with aspheric surface[J]. Metrology & Measurement Technology, 27, 1-4, 13(2007).

[17] Shang M H, Yu F H. Research on microscopic 3D measurement system based on focus variation[J]. Laser & Optoelectronics Progress, 58, 1600002(2021).

[18] Seo Y B, Joo K N, Ghim Y S et al. Subaperture stitching wavelength scanning interferometry for 3D surface measurement of complex-shaped optics[J]. Measurement Science and Technology, 32, 045201(2021).

[19] Chen S Y, Xue S, Zhai D D et al. Measurement of freeform optical surfaces: trade-off between accuracy and dynamic range[J]. Laser & Photonics Reviews, 14, 1900365(2020).

[20] Chen S Y, Lu W W, Chen W W et al. Efficient subaperture stitching method for measurement of large area microstructured topography[J]. Optics and Lasers in Engineering, 127, 105974(2020).

[21] Fang F Z, Zeng Z, Zhang X D et al. Measurement of micro-V-groove dihedral using white light interferometry[J]. Optics Communications, 359, 297-303(2016).

[22] Saad A, Jiang Y, Liu Y W et al. The measurement of the diameter change of a piezoelectric transducer cylinder with the white-light interferometry[J]. Optics and Lasers in Engineering, 56, 169-172(2014).

[23] Chen W W, Chen S Y, Zhai D D. Coordinate stitching measurement of highly steep freeform surfaces[J]. Measurement Science and Technology, 32, 025009(2021).