[1] Zhao Y F, Chen C Z. Mechanism of the deformation and preventive measures of the cracks in metal ceramics cladding layer[J]. Laser Technology, 30, 16-19,22(2006).

[2] Song J L. Microstructure characteristics and crack control technology of laser cladding[D](2006).

[3] Zimmermann G, Pickmann C, Schaberger-Zimmermann E et al. Do rotating magnetic fields unconditionally lead to grain refinement？ A case study for directionally solidified Al-10wt%Cu alloys[J]. Materialia, 3, 326-337(2018).

[4] Yu T, Deng Q L, Zhang W et al. Study on cracking mechanism of laser clad NiCrBSi coating[J]. Journal of Shanghai Jiao Tong University, 46, 1043-1048(2012).

[5] Meng L, Zhao W F, Hou K L et al. A comparison of microstructure and mechanical properties of laser cladding and laser-induction hybrid cladding coatings on full-scale rail[J]. Materials Science and Engineering A, 748, 1-15(2019).

[6] Lee C, Park H, Yoo J et al. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC + NiCr[J]. Applied Surface Science, 345, 286-294(2015).

[7] Smurov I. Laser cladding and laser assisted direct manufacturing[J]. Surface and Coatings Technology, 202, 4496-4502(2008).

[8] Fu F X, Zhang Y L, Chang G R et al. Analysis on the physical mechanism of laser cladding crack and its influence factors[J]. Optik, 127, 200-202(2016).

[9] Ocelík V, Eekma M, Hemmati I et al. Elimination of Start/Stop defects in laser cladding[J]. Surface and Coatings Technology, 206, 2403-2409(2012).

[10] Zhang D D. Study on the generating mechanism and control methods of high hardness laser cladding coating cracks[D](2014).

[11] Shangguan X C, Zhao Y C, Xu Y et al. Effect of laser power on tribological properties of WC particles reinforced iron-based composite coating[J]. Heat Treatment of Metals, 43, 56-61(2018).

[12] Yi P, Zhan X H, He Q K et al. Influence of laser parameters on graphite morphology in the bonding zone and process optimization in gray cast iron laser cladding[J]. Optics & Laser Technology, 109, 480-487(2019).

[13] Zhu G X, Zhang A F, Li D C. Effect of process parameters on surface smoothness in laser cladding[J]. Chinese Journal of Lasers, 37, 296-301(2010).

[14] Li J N[M]. Laser cladding technology and its application, 11(2015).

[15] Wu X W, Zeng X Y, Zhu B D et al. Cracking tendency of laser cladding Ni based WC composite coatings[J]. Chinese Journal of Lasers, 24, 570-576(1997).

[16] Zhang L, Chen X M, Liu W et al. Formation mechanism and sensitivity of cracks in laser-cladded Ni-based-alloy coatings[J]. Laser & Optoelectronics Progress, 56, 111401(2019).

[17] Fu F X, Zhang Y L, Chang G R et al. Analysis on the physical mechanism of laser cladding crack and its influence factors[J]. Optik, 127, 200-202(2016).

[18] Zhou S F, Zeng X Y, Hu Q W et al. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization[J]. Applied Surface Science, 255, 1646-1653(2008).

[19] Shao Z L. Research and development of powder conveying system for crack laser repair experimental device[D](2018).

[20] Hao M Z. The optimization of laser cladding process parameters and adaptive finite element analysis[D], 4-10(2012).

[21] Song G M, Wu G, Huang W J. Cracking control in laser cladding process with unidirectional powder feeding and double scanning[J]. Heat Treatment of Metals, 30, 26-28(2005).

[22] Wang Z J, Dong S Y, Xu B S et al. Effect of laser cladding processing parameters on metal forming efficiency and geometry[J]. Infrared and Laser Engineering, 39, 315-319(2010).

[23] Gao J, Song D Y, Feng J W. Influence of processing parameters on geometrical features of CBN coatings by laser cladding on titanium alloy surface[J]. Surface Technology, 44, 77-80,87(2015).

[24] Yu T B, Yang L, Zhao Y et al. Experimental research and multi-response multi-parameter optimization of laser cladding Fe313[J]. Optics & Laser Technology, 108, 321-332(2018).

[25] Xu J J, Lin X, Guo P F et al. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy[J]. Journal of Alloys and Compounds, 749, 859-870(2018).

[26] Zhang D Q, Zhang J Q, Ma D et al. Determining overlapping ratio of laser cladding based on reverse engineering[J]. Machinery Design & Manufacture, 118-120(2016).

[27] Fang J X, Dong S Y, Xu B S et al. Study of stresses of laser metal deposition using FEM considering phase transformation effects[J]. Chinese Journal of Lasers, 42, 0503009(2015).

[28] Wang C Q, Liu H X, Zhou R et al. Characteristic behaviors of particle phases in NiCrBSi-TiC composite coating by laser cladding assisted by mechanical vibration[J]. Acta Metallurgica Sinica, 49, 221-228(2013).

[29] Zhong M L, Liu W J. Comparative research on cracking tendency in powder feeding laser cladding Stellite and NiCrSiB alloys[J]. Chinese Journal of Lasers, 29, 1031-1036(2002).

[30] Zhang T G, Sun R L. Finite element analysis of crack in laser clad Ni60 coating on TC4 surface[J]. Heat Treatment of Metals, 43, 190-194(2018).

[31] Liu H Q, Liu X B, Meng X J et al. Crack formation mechanism and controlling methods of laser clad ceramic matrix composite coatings on metal substrate[J]. Materials Review, 27, 60-63(2013).

[32] Wang F J, Mao H D, Zhang D W et al. The crack control during laser cladding by adding the stainless steel net in the coating[J]. Applied Surface Science, 255, 8846-8854(2009).

[33] Ma N N, Chen J, Huang Z R et al. Densification of C/SiC composite surface by the hybrid process of laser cladding and subsequent heat treatment[J]. Ceramics International, 45, 7703-7708(2019).

[34] Dong C S, Zhong M L, Hao Q et al. High chromium coatings by laser deposition of Inconel 690 for repairing nuclear power plant components[J]. Chinese Journal of Lasers, 36, 3256-3261(2009).

[35] Wang D S, Tian Z J, Wang J W et al. A method of crack control in laser cladding process with changing power density distribution of laser beam[J]. Chinese Journal of Lasers, 38, 0103004(2011).

[36] Guo L Y, Chen Z, Long J et al. Study on the effect of stress state and crystal orientation on micro-crack tip propagation behavior in phase field crystal method[J]. Acta Physica Sinica, 64, 384-392(2015).

[37] Wang P, Li Z X, Huang C L et al. Application research on titanium alloy laser surface modification technology[J]. Laser Journal, 35, 4-6(2014).

[38] Huang G, Su Y, Duan Z Y et al. Microstructure of Fe powder on laser cladded Ti6Al4V alloy[J]. Shanghai Metals, 35, 22-26(2013).

[39] Sun R L, Yang X J. Microstructure and friction wear properties of TiC laser clad layer[J]. Optical Technique, 32, 287-289(2006).

[40] Bao R L. Laser cladding Co- based alloy and its composite coating[D](2007).

[41] Ye H, Lei L P, Yu W X et al. Microstructure and thermal fatigue resistance of Co-based alloy coating on H13 steel by laser cladding[J]. High Power Laser and Particle Beams, 29, 140-144(2017).

[42] Song W L, Echigoya J, Zhu B D et al. Effects of Co on the cracking susceptibility and the microstructure of Fe-Cr-Ni laser-clad layer[J]. Surface and Coatings Technology, 138, 291-295(2001).

[43] Zhou Y. Study on the clad quality and the impact factors in aluminum alloy laser cladding[D](2017).

[44] Chen J F, Li X P, Xue Y P. Friction and wear properties of laser cladding Fe901 alloy coating on 45 steel surface[J]. Chinese Journal of Lasers, 46, 0502001(2019).

[45] Song W L, Echigoya J, Zhu B D et al. Vacuum laser cladding and effect of Hf on the cracking susceptibility and the microstructure of Fe-Cr-Ni laser-clad layer[J]. Surface and Coatings Technology, 126, 76-80(2000).

[46] Meng Q W, Geng L, Ni D R. Laser cladding NiCoCrAlY coating on Ti-6Al-4V[J]. Materials Letters, 59, 2774-2777(2005).

[47] Lin Y H, Yuan Y, Wang L et al. Effect of electric-magnetic compound field on the microstructure and crack in solidified Ni60 alloy[J]. Acta Metallurgica Sinica, 54, 1442-1450(2018).

[48] Yuan H R. Research on arc behaviors and joint microstructure & properties in ultrasonic assisted AC TIG welding of aluminum alloy[D](2014).

[49] Liu H X, Zhao Y S, Zhang X W et al. Microstructure and high-temperature oxidation resistance of laser cladding in situ synthesis Ti-Al-Si composite coatings[J]. Optics and Precision Engineering, 27, 316-325(2019).

[50] Liu H X, Cai C X, Jiang Y H et al. Influence of alternative magnetic field on macro morphology and microstructure of laser cladding Fe-based composite coating[J]. Optics and Precision Engineering, 20, 2402-2410(2012).

[51] Freeney T A, Mishra R S. Effect of friction stir processing on microstructure and mechanical properties of a cast-magnesium-rare earth alloy[J]. Metallurgical and Materials Transactions A, 41, 73-84(2009).

[52] Wang C L, Gao Y, Zeng Z C et al. Effect of rare-earth on friction and wear properties of laser cladding Ni-based coatings on 6063Al[J]. Journal of Alloys and Compounds, 727, 278-285(2017).

[53] Wu W P, Wang X J, Wang Z Y et al. Laser cladding ceramic coating[J]. Journal of Ceramics, 38, 13-19(2017).

[54] Brånemark P I, Breine U, Adell R et al. Intra-osseous anchorage of dental prostheses: I. experimental studies[J]. Scandinavian Journal of Plastic and Reconstructive Surgery, 3, 81-100(1969).

[55] Zhang J Q, Lei J B, Gu Z J et al. Effect of WC-12Co content on wear and electrochemical corrosion properties of Ni-Cu/WC-12Co composite coatings deposited by laser cladding[J]. Surface and Coatings Technology, 393, 125807(2020).

[56] Zhang Q M, He J J, Liu W J et al. Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding[J]. Surface and Coatings Technology, 162, 140-146(2003).

[57] Brånemark P I, Hansson B O, Adell R et al. Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period[J]. Scandinavian Journal of Plastic and Reconstructive Surger, 16, 1-4(1977).

[58] Wang Y C, Zhao S, Qi L X et al. Laser cladding fabrication of hydroxyapatite bioceramic coatings on Ti alloy[J]. Surface Technology, 47, 21-27(2018).

[59] Roy M, Bandyopadhyay A, Bose S. In vitro antimicrobial and biological properties of laser assisted tricalcium phosphate coating on titanium for load bearing implant[J]. Materials Science and Engineering C, 29, 1965-1968(2009).

[60] Roy M, Balla V K, Bandyopadhyay A et al. Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma[J]. Acta Biomaterialia, 7, 866-873(2011).

[61] Xu J L, Zhou J Z, Tan W S et al. Thermal corrosion resistance of Co-based alloy coatings by laser cladding assisted by electromagnetic stirring[J]. Acta Optica Sinica, 39, 0114002(2019).

[62] Foroozmehr E, Lin D C, Kovacevic R. Application of vibration in the laser powder deposition process[J]. Journal of Manufacturing Processes, 11, 38-44(2009).

[63] Liu H X, Tao X D, Zhang X W et al. Microstructure and interface distribution of Fe-Cr-Si-B-C laser cladding alloy coatings assisted by mechanical vibration[J]. Optics and Precision Engineering, 23, 2192-2202(2015).

[64] Liu H X, Xu Q, Wang C Q et al. Corrosion and wear behavior of Ni60CuMoW coatings fabricated by combination of laser cladding and mechanical vibration processing[J]. Journal of Alloys and Compounds, 621, 357-363(2015).

[65] Shi H. Microstructure and properties of Fe60 coating prepared by laser cladding with composite field[D](2018).

[66] Nie Y B. Regulation of microstructure and property of laser cladding by multi-dimensional high frequency vibration[D](2019).

[67] Deng Q L, Xu L M, Hu D J et al. Reducing and eliminating the micro-cracks in the metal components formed by laser cladding[J]. Chinese Journal of Mechanical Engineering, 38, 117-121(2002).

[68] Chen C Y, Deng Q L, Song J L. Influence of Ni content and ultrasonic vibration to cracks in process of laser cladding[J]. Journal of Nanjing University of Aeronautics & Astronautics, 37, 44-48(2005).

[69] Wang D S, Tian Z J, Wang J W et al. Experimental on preparation of thick ceramic coating by laser multi-layer cladding[J]. Transactions of the China Welding Institution, 33, 57-60,116(2012).

[70] Shao Y L, Chen X P, Fu D et al. Effect of synchronous ultrasonic vibration on microstructure and properties of laser cladding[J]. Hot Working Technology, 43, 160-162,165(2014).

[71] Cao Y N, Zhang Y M, Jie X H et al. Study on control of crack in laser cladding Ni-based coating on steel[J]. Hot Working Technology, 41, 133-136(2012).

[72] Guo Q T. Experiment research of electromagnetic purification of molten aluminum alloy with high frequency magnetic field[D](2005).

[73] Xiao R S, Zuo T C, Ambrosy G et al. Investigation on current enhanced CO2 laser welding of aluminum[J]. Chinese Journal of Lasers, 31, 359-362(2004).

[74] Xi Y C, Zhu J B, Liu S et al. Effect of pulsed current on mechanical and anticorrosion properties of laser cladded coating[J]. Laser & Optoelectronics Progress, 55, 043102(2018).

[75] Velde O, Gritzki R, Grundmann R. Numerical investigations of Lorentz force influenced Marangoni convection relevant to aluminum surface alloying[J]. International Journal of Heat and Mass Transfer, 44, 2751-2762(2001).

[76] Song S Y, Wang L, Hu Y et al. Graded coating produced by laser melt injection under steady magnetic field[J]. Chinese Journal of Lasers, 43, 0503005(2016).

[77] Wang L, Hu Y, Song S Y et al. Suppression effect of a steady magnetic field on surface undulation during laser remelting[J]. Chinese Journal of Lasers, 42, 1103005(2015).

[78] El-Bassyouni T A, Badr A A, Abdel-Azim A N et al. Effect of electromagnetic forces on aluminium cast structure[J]. Journal of Japan Institute of Light Metals, 33, 733-741(1983).

[79] Cai C X, Liu H X, Jiang Y H et al. Influence of AC magnetic field on microstructure and wear behaviors of laser cladding Fe-based composite coating‍[J]. Tribology, 33, 229-235(2013).

[80] Liu H X, Liu Z F, Zhang X W et al. Design of steady-state magnetic field and effect of current intensity on microstructure of Fe55 alloy coating by laser cladding[J]. Infrared and Laser Engineering, 46, 0406001(2017).

[81] Liu H X, Ji S W, Jiang Y H et al. Microstructure and property of Fe60 composite coatings by rotating magnetic field auxiliary laser cladding[J]. Chinese Journal of Lasers, 40, 0103007(2013).

[82] Yu B H, Hu X H, Wu Y E et al. Studies of the effects and mechanism of electromagnetic stirring on the microstructures and hardness of laser cladding WC-Co based alloy coating[J]. Chinese Journal of Lasers, 37, 2672-2677(2010).

[83] Fu Y M, Qi T, Zong L et al. Effects of alternating magnetic field on microstructures and mechanics properties of high hardness cladding layers[J]. China Mechanical Engineering, 28, 2378-2382(2017).

[84] Wang L, Song S Y, Hu Y et al. Regulation research on microstructure of laser cladding under electric-magnetic synergistic effect[J]. Chinese Journal of Lasers, 42, 0103005(2015).

[85] Zhang N, Liu W W, Deng D W et al. Effect of electric-magnetic compound field on the pore distribution in laser cladding process[J]. Optics & Laser Technology, 108, 247-254(2018).

[86] Zhai L L, Ban C Y, Zhang J W. Investigation on laser cladding Ni-base coating assisted by electromagnetic field[J]. Optics & Laser Technology, 114, 81-88(2019).

[87] Xu H, Zheng Q G, Ding Z H et al. Study on laser cladding hard alloy with electromagnetic stirring[J]. Laser Technology, 29, 449-451(2005).

[88] Li G D, Ma Y L, Xing S Q et al. Numerical simulation of electromagnetic field and flow field in square wave electromagnetic stirring of continuous casting mould[J]. Foundry Technology, 40, 276-282(2019).

[89] Jia H, Li M. Effect of electromagnetic stirring on microstructure and properties of Fe based hardfacing alloy[J]. Hot Working Technology, 47, 222-225(2018).

[90] Liu Z J, Sun J G. Influence of intermittent alternative magnetic field waveform on microstructure and properties of plasma arc surfacing layer[J]. Welding Technology, 38, 14-17,6(2009).

[91] Cao F, Yang F F, Kang H J et al. Effect of traveling magnetic field on solute distribution and dendritic growth in unidirectionally solidifying Sn-50 wt%Pb alloy: an in situ observation[J]. Journal of Crystal Growth, 450, 91-95(2016).

[92] Li S X, Wang P, Lan P et al. Melt flow and heat transfer at the crater end of round billet continuous casting using final electromagnetic stirring[J]. Chinese Journal of Engineering, 41, 748-756(2019).

[93] Yu Q, Wang C S. Laser additive manufacturing of Ni45 alloys assisted by electromagnetic stirring[J]. Chinese Journal of Lasers, 45, 0402003(2018).

[94] Hu Y, Wang L, Lou F X et al. Mechanism study of steady magnetic field effect on spherical WC particle distribution during laser melt injection[J]. Journal of Mechanical Engineering, 57, 240-248(2021).

[95] Liu H Q, Ge C, Wang Z W et al. Research progress on crack control of laser clad composite coating[J]. Heat Treatment of Metals, 43, 228-232(2018).

[96] Liu Z, Song K, Gao B et al. Microstructure and mechanical properties of Al2O3/ZrO2 directionally solidified eutectic ceramic prepared by laser 3D printing[J]. Journal of Materials Science & Technology, 32, 320-325(2016).

[97] Zhou S F, Zeng X Y, Hu Q W et al. Process study of Ni-based WC composite coatings by means of laser-induction hybrid cladding[J]. Laser Technology, 33, 124-126,137(2009).

[98] Zhou S F, Dai X Q. Microstructure evolution of Fe-based WC composite coating prepared by laser induction hybrid rapid cladding[J]. Applied Surface Science, 256, 7395-7399(2010).

[99] Lu Y Z, Huang G K, Wang Y Z et al. Crack-free Fe-based amorphous coating synthesized by laser cladding[J]. Materials Letters, 210, 46-50(2018).

[100] Mao H D. The study of controlling cracks in laser clad layer[D](2007).

[101] Jiang L, Bian J C, Wei Z C et al. Effects of thermal-cold cycling treatment on microstructures and properties of electromagnetic stirred AZ91 magnesium‍[J]. Special Casting & Nonferrous Alloys, 39, 681-684(2019).

[102] Pi Z Q, Qiu C J, Fan X F. Study of crack control for CoNiCrWC composite coating by laser cladding[J]. Rare Metal Materials and Engineering, 40, 283-285(2011).

[103] Frenk A, Marsden C F, Wagnière J D et al. Influence of an intermediate layer on the residual stress field in a laser clad[J]. Surface and Coatings Technology, 45, 435-441(1991).