Blades Model Reconstruction Based on Speckle Vision Measurement

Tao Wang; Zhan Li; Sheng Wang; Weilin Qiao; Jun Wu

doi:10.3788/LOP56.011501

[1] Ding H P. Research on model reconstruction of aero-engine damaged blades and laser cladding[D]. Tianjin: Civil Aviation University of China, 1-6(2016).

[2] Yu Z J, Song S T, Wang T et al. Digital modeling of aircraft engine blade based on reverse engineering[J]. Machine Tool & Hydraulics, 39, 122-125(2011).

[3] Escamilla G A P, Kobayashi F, Otani Y. Three-dimensional surface measurement based on the projected defocused pattern technique using imaging fiber optics[J]. Optics Communications, 390, 57-60(2017). http://www.sciencedirect.com/science/article/pii/S0030401816311269

[4] Yu Z J, Ma K, Wang Z J et al. Surface modeling method for aircraft engine blades by using speckle patterns based on the virtual stereo vision system[J]. Optics Communications, 411, 33-39(2018). http://adsabs.harvard.edu/abs/2018OptCo.411...33Y

[5] Bremer C. Adaptive Strategies for manufacturing and repair of blades and blisks. [C]∥ASME Turbo Expo: Power for Land, Sea, & Air.(2000).

[6] Piya C, Wilson J M, Murugappan S et al. Virtual repair: geometric reconstruction for remanufacturing gas turbine blades. [C]∥ASME International Design Engineering Technical Conferences & Computers & Information in Engineering Conference, 895-904(2011).

[7] Li Q D, Li W L, Zhou L P. A surface feature-preserving point cloud simplification method for aviation blades[J]. China Mechanical Engineering, 25, 2204-2212(2014).

[8] Zheng J M, Li Z G, Chen X. Worn area modeling for automating the repair of turbine blades[J]. The International Journal of Advanced Manufacturing Technology, 29, 1062-1067(2006). http://link.springer.com/article/10.1007/s00170-003-1990-6

[9] Gao J, Chen X, Yilmaz O et al. An integrated adaptive repair solution for complex aerospace components through geometry reconstruction[J]. The International Journal of Advanced Manufacturing Technology, 36, 1170-1179(2008). http://link.springer.com/article/10.1007/s00170-006-0923-6

[10] Zhao N, Li L Y, Liu J et al. A three-dimensional reconstruction methodology for aeroengine blade welding repair[J]. Transactions of the China Welding Institution, 35, 73-76, 117(2014).

[11] Wang S, Xu X. 3D reconstruction based on horopter[J]. Acta Optica Sinica, 37, 0515004(2017).

[12] Cheng M J, Shen X J, Xiao J J et al. Three-dimensional calibration of fisheye camera based on laser scanner[J]. Acta Optica Sinica, 37, 0315001(2017).

[13] Zhang H Y, Yu Z J. Initial displacement estimation method for speckle image based on marker matching[J]. Acta Optica Sinica, 37, 0303001(2017).

[14] Cai J, Huang P F. Research of a real-time feature point tracking method based on the combination of improved SURF and P-KLT algorithm[J]. Acta Aeronautica et Astronautica Sinica, 34, 1204-1214(2013).

[15] Yu Z J, Ma K, Wang Z J et al. Marker matching method with improved KLT algorithm[J]. Laser & Optoelectronics Progress, 55, 020301(2018).

[16] Chen B, Sun T Q, Liu A X. Influence of speckle noise on image registration based on feature point matching[J]. Laser & Optoelectronics Progress, 54, 121103(2017).

[17] Wang C B. Multi-view 3D reconstruction based on binocular stereo vision[D]. Quanzhou: Huaqiao University, 40-51(2013).

[18] Wu Q Y, Zeng Z, Zhang B C et al. A 360° three-dimensional measurement system and its calibration[J]. Chinese Journal of Lasers, 44, 0404002(2017).

[19] Wang H, Wang L W, Wang T et al. Method and implementation of remanufacture and repair of aircraft engine damaged blades[J]. Acta Aeronautica et Astronautica Sinica, 37, 1036-1048(2016).

[20] Huo H X. Large complex malleable cast a 3D-scanning point cloud data denoising and smoothing method research[D]. Shenyang: Shenyang University of Technology, 29-30(2017).